Research on the mechanical property deterioration and the creep damage for the in-serviced heating furnace tubes
Source abstract
Abstract
Long term exposition and high temperature in the petrochemical industry pose challenges for metal materials, especially for the AISI 1020 steel, which is a type of carbon structural steel. The creep damage is therefore particularly important. However, few researches focus on this type of material owing to the limit service temperature is not high. In this paper, the study focuses on AISI 1020 steel furnace tubes service that have been in service for over 20 years at 218 o C. Microstructural observations and mechanical properties tests are conducted on the tubes. The results indicated that the furnace tube exhibited pearloid spheroidisation after service. The hardness of the lower section of the tube characterized by a large grain size was below 140 HV 0.3 . Compared with a new furnace tube, the ultimate tensile strength (UTS) of the furnace tube after service decreased by 18.93%、23.56% and 6.93% at room temperature, 600 °C, and 650 °C, respectively. The carbides in the furnace tube mainly include Fe 3 C and Cr 7 C 3 . At a given stress level, the steady-state creep rate increases with increasing temperature, and the creep life decreases. Such results provide a theoretical basis for designing and manufacturing furnace tubes in similar working conditions, controlling material deterioration, and developing preventive measures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nanjing Tech University
Funding
the National Natural Science Foundation of China · the Postgraduate Research & Practice Innovation Program of Jiangsu Province · Natural Science Foundation of the Jiangsu Higher Education Institutions of China
References (28)
Show source-provided references
1. 10.1016/j.engfailanal.2023.10784610.1016/j.engfailanal.2023.107846 ↗
2. 10.1016/j.engfailanal.2024.10847210.1016/j.engfailanal.2024.108472 ↗
3. 10.1016/j.engfailanal.2015.02.01010.1016/j.engfailanal.2015.02.010 ↗
4. 10.1016/j.corsci.2022.11025010.1016/j.corsci.2022.110250 ↗
5. 10.1016/j.engfailanal.2019.04.05910.1016/j.engfailanal.2019.04.059 ↗
6. Lin G, Gong J, Xuan F. A whole-section failure criterion for creep life evaluation of components at elevated temperatures [J]. Eng Fract Mech 2023; 285(109301).
7. 10.1016/j.ijfatigue.2022.10748110.1016/j.ijfatigue.2022.107481 ↗
8. 10.1016/j.ijpvp.2022.10482210.1016/j.ijpvp.2022.104822 ↗
9. 10.1016/j.engfailanal.2019.02.02210.1016/j.engfailanal.2019.02.022 ↗
10. 10.1016/j.engfailanal.2023.10768610.1016/j.engfailanal.2023.107686 ↗
11. 10.1016/j.engfailanal.2011.11.01610.1016/j.engfailanal.2011.11.016 ↗
12. 10.1016/j.engfailanal.2023.10743810.1016/j.engfailanal.2023.107438 ↗
13. 10.1016/j.engfailanal.2017.05.01410.1016/j.engfailanal.2017.05.014 ↗
14. 10.1016/j.corsci.2025.11345710.1016/j.corsci.2025.113457 ↗
15. Menf L, Li W, Yang F, et al. Synergistic optimization of microstructure and mechanical properties of AISI 430 ferritic stainless steel via dual-phase zone annealing process [J]. Mater Charact 2024; 216.
16. Bharare OS, Sarve SA, Gengane VV, et al. Effect of various surface heat treatment methods and its parametric variation on the hardness properties of different steels grades [J]. Mater Today Proc 2024; 102.
17. 10.1016/j.msea.2022.14370310.1016/j.msea.2022.143703 ↗
18. 10.1016/j.engfailanal.2017.07.00710.1016/j.engfailanal.2017.07.007 ↗
19. 10.1016/j.jnucmat.2015.11.01310.1016/j.jnucmat.2015.11.013 ↗
20. 10.1016/S0921-5093(00)00881-910.1016/S0921-5093(00)00881-9 ↗
21. 10.1016/j.corsci.2023.11159410.1016/j.corsci.2023.111594 ↗
22. 10.1016/j.engfailanal.2021.10580710.1016/j.engfailanal.2021.105807 ↗
23. 10.1016/j.matchar.2023.11297110.1016/j.matchar.2023.112971 ↗
24. 10.1016/j.engfailanal.2023.10713410.1016/j.engfailanal.2023.107134 ↗
25. Zhang W, Wang X, Wang Y, et al. Type IV failure in weldment of creep resistant ferritic alloys: II. Creep fracture and lifetime prediction [J]. J Mech Phys Solids 2020; 134.
26. 10.1016/j.ijpvp.2023.10503910.1016/j.ijpvp.2023.105039 ↗
27. 10.1016/j.jmrt.2024.02.21010.1016/j.jmrt.2024.02.210 ↗
28. Salmon H, Vincent S, Garnier J, et al. Anisotropic intergranular damage development and fracture in a 14Cr ferritic ODS steel under high-temperature tension and creep [J]. Mater Sci Eng A 2018; 722.