Effects of liquid nitrogen cold rolling on microstructure, mechanical and electrical properties of Au7.5Ni1.5Cu alloy
Source abstract
Abstract
The Au7.5Ni1.5Cu alloy exhibits high stability and excellent electrical conductivity, and is widely used in applications such as aerospace precision conductive slip-rings, micro-motor brushes, high-end connectors, and low-load sliding electrical contact applications. To overcome the inherent inverse relationship between strength and electrical conductivity in this alloy, a liquid-nitrogen cold-rolling process was employed, and the resulting microstructural evolution, mechanical properties, and electrical conductivity were systematically investigated. The results demonstrate that when the cold-rolling reduction increased from 20% to 30%, a nanoscale twin structure was induced within the alloy, accompanied by the development of a strong ⟨111⟩ fiber texture along the rolling direction. Under liquid-nitrogen cold-rolling conditions, both the tensile strength and microhardness increased markedly, while the electrical conductivity exhibited an initial increase followed by a slight decline. At an optimal reduction of 25%, the alloy achieved a desirable combination of high strength and high conductivity, with a tensile strength of 796 MPa, a microhardness of 221 HV0.1, and an electrical conductivity of 9.72% IACS. Compared with the untreated alloy, these values represent increases of 246 MPa in tensile strength, 49 HV0.1 in microhardness, and 1.09% IACS in electrical conductivity. This synergistic enhancement in mechanical and electrical performance is primarily attributed to the formation of nanoscale twins during liquid-nitrogen cold rolling. The nanoscale twin boundaries effectively impede dislocation motion, thereby strengthening the material, while their highly ordered atomic structure minimizes electron scattering, enabling the simultaneous improvement of strength and electrical conductivity in the Au7.5Ni1.5Cu alloy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Nanoporous metals and alloys · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kunming University of Science and Technology
Sino-Platinum Metals Co., Ltd
Funding
Yunnan Provincial Science and Technology Department
References (33)
Show source-provided references
1. Yang ZG, Zuo XQ, Peng X, et al. Research progress on high strength,high wear resistance and high conductivity gold-based alloys(in Chinese). Journal of Kunming University of Science and Technology(Natural Science Edition) 2025; 50: 17–28.
2. Pu CJ, Xie M, Du WJ, et al. Research development of precious metal-based electric contact materials(in Chinese). Materials Reports 2014; 28: 22–25.
3. 10.4028/www.scientific.net/KEM.667.27410.4028/www.scientific.net/KEM.667.274 ↗
4. Tang ZL, Huang RF, Wen L. S.machanism of size effect of electric conductivity in ultrathin metal film(in Chinese). Chinese Journal of Materials Research 1997; 11: 438–440.
5. Peng D, Tao REN, Guoyi QIN, et al. Microstructure and properties of Ag-15Cu-10Au-2Ni alloy. Journal of Functional Materials/Gongneng Cailiao 2019; 50: 3174–3178.
6. Luo Y, Song Y, Wang P, et al. Microstructure and properties of gold based brush materials during recrystallization(in Chinese). Precious Metals 2020; 41: 48–51.
7. 10.1016/j.actamat.2014.06.01310.1016/j.actamat.2014.06.013 ↗
8. 10.1016/j.scriptamat.2016.10.02210.1016/j.scriptamat.2016.10.022 ↗
9. 10.1038/ncomms276810.1038/ncomms2768 ↗
10. 10.1021/acs.nanolett.5b0069410.1021/acs.nanolett.5b00694 ↗
11. 10.1126/science.109290510.1126/science.1092905 ↗
12. 10.1016/j.scriptamat.2012.06.02210.1016/j.scriptamat.2012.06.022 ↗
13. 10.1016/j.actamat.2018.06.00910.1016/j.actamat.2018.06.009 ↗
14. 10.1007/s44210-022-00001-910.1007/s44210-022-00001-9 ↗
15. 10.1016/j.jallcom.2023.17191410.1016/j.jallcom.2023.171914 ↗
16. 10.1016/j.scriptamat.2018.08.01210.1016/j.scriptamat.2018.08.012 ↗
17. 10.1016/j.scriptamat.2011.09.00210.1016/j.scriptamat.2011.09.002 ↗
18. 10.1016/j.actamat.2016.07.03810.1016/j.actamat.2016.07.038 ↗
19. 10.1016/j.actamat.2008.01.03010.1016/j.actamat.2008.01.030 ↗
20. 10.1038/nnano.2012.11610.1038/nnano.2012.116 ↗
21. 10.1016/j.scriptamat.2016.09.01210.1016/j.scriptamat.2016.09.012 ↗
22. Ovid’ko IA, Sheinerman AG. Nanocrack generation due to stress-driven widening of twins in nanotwinned metals. Rev Adv Mater Sci 2014; 39: 9–14.
23. 10.1016/j.msea.2023.14527210.1016/j.msea.2023.145272 ↗
24. 10.1103/PhysRevB.1.138210.1103/PhysRevB.1.1382 ↗
25. 10.1021/acsnano.1c0636710.1021/acsnano.1c06367 ↗
26. 10.1038/s41467-020-14876-y10.1038/s41467-020-14876-y ↗
27. 10.1016/j.matdes.2025.11418510.1016/j.matdes.2025.114185 ↗
28. 10.1016/j.matchar.2023.11351310.1016/j.matchar.2023.113513 ↗
29. 10.1016/S1003-6326(20)65393-610.1016/S1003-6326(20)65393-6 ↗
30. 10.1016/j.scriptamat.2021.11389110.1016/j.scriptamat.2021.113891 ↗
31. 10.1016/j.jallcom.2023.17257210.1016/j.jallcom.2023.172572 ↗
32. 10.1016/j.scriptamat.2014.11.03210.1016/j.scriptamat.2014.11.032 ↗
33. 10.1016/j.electacta.2015.08.02210.1016/j.electacta.2015.08.022 ↗