journal article·2026-06-19

Crack defects and formation mechanism of multi-principal element alloy FeCr0.5NiCu0.5 coating fabricated by Laser cladding

Daliang Yu, Jie Cheng, Hanwei Zhang, Qingwei Dai, Xiong Zhou

Publisher page

Abstract

Laser cladding technology presents a promising method for fabricating multi-principal element alloy (MPEA) coatings, yet cracks remain one of the most prevalent defects in HEA laser cladding. In this study, FeCr0.5NiCu0.5 multi-principal element alloy coatings were produced on heat-resistant steel (12Cr1MoV) using laser cladding with varying scanning speeds. The study systematically examined the types and mechanisms of cracks within the multi-principal element alloy coatings and also summarized the effects of scanning speed on the coating's dilution rate and cooling rate. Results indicate that an increase in scanning speed significantly elevates the coating's dilution rate and the risk of cracking. With the increase in scanning speed, the cooling rate has risen from 2.68 × 10 3 K/s to 3.7 × 10 4 K/s, achieving an order of magnitude improvement. The secondary dendrite arm spacing (SDAS) has diminished from 4.02 µm to 1.8 µm, resulting in a significant refinement of the grains. Cracks within the coating are categorized into macrocracks and microcracks. Macrocracks originate at the interface between the coating and the substrate, induced by the substantial thermal expansion coefficient mismatch between the multi-principal element alloy and heat-resistant steel. Microcracks manifest as intergranular cracks due to the distribution of low-melting-point Cu elements along the grain boundaries, which increases the brittleness of the boundaries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chongqing University of Science and Technology

Southwest University

Grandblue Environment Co., Ltd, Foshan, China

Funding

Provincial and Ministerial Co-constructive of Collaborative Innovation Center for MSW Comprehensive Utilization · Chongqing Natural Science Foundation Innovation and Development Joint Fund · Natural Science Foundation of Chongqing Municipality

References (40)

Show source-provided references
1. 10.1016/j.mattod.2015.11.02610.1016/j.mattod.2015.11.026 ↗
2. 10.1016/j.scriptamat.2020.06.01710.1016/j.scriptamat.2020.06.017 ↗
3. 10.1016/j.actamat.2013.04.05810.1016/j.actamat.2013.04.058 ↗
4. 10.1016/j.apsusc.2018.01.04710.1016/j.apsusc.2018.01.047 ↗
5. 10.1016/j.mtcomm.2024.10948510.1016/j.mtcomm.2024.109485 ↗
6. 10.1177/0267083624124521410.1177/02670836241245214 ↗
7. 10.1016/j.msea.2011.09.03310.1016/j.msea.2011.09.033 ↗
8. 10.1177/0267083624124521410.1177/02670836241245214 ↗
9. 10.1177/0267083624124581110.1177/02670836241245811 ↗
10. 10.1016/j.surfcoat.2023.12957310.1016/j.surfcoat.2023.129573 ↗
11. 10.1016/j.jallcom.2022.16390510.1016/j.jallcom.2022.163905 ↗
12. 10.1016/j.surfcoat.2021.12691110.1016/j.surfcoat.2021.126911 ↗
13. 10.1016/j.surfcoat.2024.13065010.1016/j.surfcoat.2024.130650 ↗
14. 10.3390/met1007088210.3390/met10070882 ↗
15. 10.1016/j.ijleo.2015.10.04310.1016/j.ijleo.2015.10.043 ↗
16. 10.1016/j.optlastec.2024.11160910.1016/j.optlastec.2024.111609 ↗
17. 10.1016/j.scriptamat.2017.02.03610.1016/j.scriptamat.2017.02.036 ↗
18. 10.3390/ma1112240110.3390/ma11122401 ↗
19. 10.1016/j.msea.2018.10.02010.1016/j.msea.2018.10.020 ↗
20. 10.1016/j.jmatprotec.2018.06.02310.1016/j.jmatprotec.2018.06.023 ↗
21. 10.1016/j.matdes.2010.12.00110.1016/j.matdes.2010.12.001 ↗
22. 10.1007/s11837-017-2381-z10.1007/s11837-017-2381-z ↗
23. 10.1016/j.jallcom.2012.09.09110.1016/j.jallcom.2012.09.091 ↗
24. 10.1016/j.surfcoat.2023.13000510.1016/j.surfcoat.2023.130005 ↗
25. 10.1016/j.surfcoat.2018.05.05410.1016/j.surfcoat.2018.05.054 ↗
26. 10.1016/j.matchemphys.2011.11.02110.1016/j.matchemphys.2011.11.021 ↗
27. 10.1002/adem.20070024010.1002/adem.200700240 ↗
28. 10.1016/j.intermet.2012.07.00110.1016/j.intermet.2012.07.001 ↗
29. 10.1063/1.358722810.1063/1.3587228 ↗
30. 10.1016/j.optlastec.2022.10788510.1016/j.optlastec.2022.107885 ↗
31. 10.1016/j.ijthermalsci.2020.10657910.1016/j.ijthermalsci.2020.106579 ↗
32. 10.1016/j.optlastec.2019.10566210.1016/j.optlastec.2019.105662 ↗
33. 10.1016/j.actamat.2009.10.05310.1016/j.actamat.2009.10.053 ↗
34. 10.1016/j.jallcom.2015.02.00410.1016/j.jallcom.2015.02.004 ↗
35. 10.1088/0965-0393/7/3/31010.1088/0965-0393/7/3/310 ↗
36. 10.1007/s11664-007-0218-110.1007/s11664-007-0218-1 ↗
37. 10.1016/j.optlastec.2021.10712910.1016/j.optlastec.2021.107129 ↗
38. 10.1016/j.addlet.2025.10032310.1016/j.addlet.2025.100323 ↗
39. 10.3390/coatings1306111710.3390/coatings13061117 ↗
40. 10.1007/s40194-020-00899-y10.1007/s40194-020-00899-y ↗