journal article·2026-06-10

Study on the interfacial bonding mechanism and microstructure of large thickness ratio Al/Mg/Al laminated composites

Zhaohua Huang, Wenshi Fu, Feng Mao, Danqing Yin, Yajing Ding, Beibei Liu, Guo Zhang

Publisher page

Abstract

Large-thickness-ratio (LTR) Al/Mg/Al laminated composites were fabricated by single-pass hot rolling with reduction ratios from 33% to 66%. The effects of reduction ratio on interfacial morphology, bonding quality, microstructural evolution, and mechanical properties were investigated. With increasing reduction, both Al and Mg layers thinned, while the Mg/Al thickness ratio peaked at 49%. Differential plastic flow induced wavy interfaces at higher reductions, and continuous, well-bonded interfaces were obtained at reductions ≥49%. Increasing reduction promoted grain fragmentation, shear-band formation, and dynamic recrystallization in the Mg core. Tensile strength varied slightly, whereas elongation was highly sensitive to reduction ratio, reaching a maximum of 26% at 49%. These results provide guidance for optimizing high-performance LTR Al/Mg/Al laminates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Aluminum based New Materials Industry Research Institute

Luoyang Longding Aluminum Industries Co., Ltd., Green and Low-Carbon Aluminum Industry Innovation Research Institute

Funding

Key R&D Special Project of Henan Province · Science and Technology Research and Development Plan Joint Fund of Henan Province · Frontier Exploration Projects of Longmen Laboratory · Natural Science Foundation of Henan Province · Program for Science & Technology Innovation Talents in Universities of Henan Province · HeLuo Young Elite Scientists Sponsorship Program · Scientific and Technological Research Projects in Henan Province

References (34)

Show source-provided references
1. Liu JM, Yong H, Zhao Y, et al. Phase evolution, hydrogen storage thermodynamics, and kinetics of ternary Mg98Ho1.5Fe0.5 alloy. J Rare Earths 2024; 42: 1800–1808.10.1016/j.jre.2023.08.019 ↗
2. 10.1016/j.jmrt.2024.04.09910.1016/j.jmrt.2024.04.099 ↗
3. 10.1016/j.jma.2022.07.01610.1016/j.jma.2022.07.016 ↗
4. Sayyed MI, Mahmoud KA, Mohammed FQ, et al. A comprehensive evaluation of Mg-Ni based alloys radiation shielding features for nuclear protection applications. Nuclear Eng Technol 2024; 56: 1830–1835.10.1016/j.net.2023.12.040 ↗
5. Yin BZ, Liu JE, Peng B, et al. Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion. J Magnesium and Alloys 2024; 12: 1367–1385.10.1016/j.jma.2022.09.016 ↗
6. Kaseem M Safira AR Aadil M et al. Innovative approach to boosting the chemical stability of AZ31 magnesium alloy using polymer-modified hybrid metal oxides. 2024; 12: 1068–1081.10.1016/j.jma.2023.12.009 ↗
7. 10.1016/j.jallcom.2019.15330210.1016/j.jallcom.2019.153302 ↗
8. Majidabad MA, Rezaei AR, Faraji G. Simultaneous enhancement of strength and ductility in AM60 tubes using a novel approach of modified tube cyclic expansion extrusion. JOM 2024; 76: 1870–1882.10.1007/s11837-024-06387-8 ↗
9. 10.1016/j.optlastec.2024.11072210.1016/j.optlastec.2024.110722 ↗
10. 10.1007/s40997-021-00425-510.1007/s40997-021-00425-5 ↗
11. Liu C, Zhu YC, Yuan SD, et al. Zn interlayer-induced modifications in interfacial structure and fracture behavior of cyclic hot-pressed Mg/Al laminated composites. Mater Sci Technol 2024; 41: 110923.
12. Sun YH, Li ZL, Zhang JL, et al. Microstructure and mechanical properties of Mg/Al laminated composite: the effect of transition layer thickness. J Alloys Compd 2024; 1005: 176045.10.1016/j.jallcom.2024.176045 ↗
13. Yuan T, Wang Y, Du WY, et al. Influence of annealing on the interfacial structure, recrystallization behaviour, and texture evolution of hot extruded Mg/Al laminated composites. Materials Today Communication 2024; 40: 110132.10.1016/j.mtcomm.2024.110132 ↗
14. Wang ZY, Li F, Zhang JY, et al. Second phase and matrix texture evolution influence mechanical properties of Al-Mg-Al composite plate by HPR with annealing temperature. Mater Sci Technol 2024; 40: 109822.
15. Lv XQ, Li XY, Liu HB. Coherent-interface-induced second hardening deformation of Al-Mg-Al nanolayers by molecular dynamics simulations. Phys Chem Chem Phys 2022; 24: 10373–10377.10.1039/D2CP00324D ↗
16. 10.1016/j.jallcom.2021.16084310.1016/j.jallcom.2021.160843 ↗
17. 10.1080/02670836.2020.186778410.1080/02670836.2020.1867784 ↗
18. 10.1016/j.msea.2021.14185110.1016/j.msea.2021.141851 ↗
19. 10.1016/S1003-6326(22)66111-910.1016/S1003-6326(22)66111-9 ↗
20. Biradar A, Rijesh M. Surface roughness – the key for roll bonding aluminium. Mater Sci Technol 2022; 39: 785–794.10.1080/02670836.2022.2141874 ↗
21. 10.1016/j.cja.2022.07.00410.1016/j.cja.2022.07.004 ↗
22. 10.1016/j.jmrt.2023.01.22710.1016/j.jmrt.2023.01.227 ↗
23. 10.1007/s11665-022-06777-610.1007/s11665-022-06777-6 ↗
24. Liu Z, Krämer A, Lohmar J, et al. The adaption, evaluation and application of a semi-empirical bond strength model for the simulations of multi-pass hot roll bonding of aluminium alloys. IntJ Mater Form 2023; 16: 71.10.1007/s12289-023-01795-8 ↗
25. Lei YD, Zhan M, Xin H, et al. An integrated computational and experimental study of the failure mode in Mg/Al laminated composite under three-point bending. J Mater Res Technol-JMR&T 2023; 47: 4130–4144.10.1016/j.jmrt.2023.10.236 ↗
26. 10.1016/j.jma.2022.08.00110.1016/j.jma.2022.08.001 ↗
27. Sun YH, Chen X, Zhou LX, et al. An innovative approach for overcoming challenges in the stacked extrusion forming of Mg/Al composite plates. Mater Sci Technol 2024; 40: 110114.
28. Li T, Wang T, Huang ZQ, et al. Hot-rolling process and properties of large thickness ratio Al/Mg/Al laminates. Trans Nonferrous Met Soc China 2023; 33: 3625–3640.10.1016/S1003-6326(23)66359-9 ↗
29. Li T, Wang T, Quan XH, et al. Effect of annealing parameters on the interfacial structures and mechanical properties of Al/Mg/Al laminates with large thickness ratio. Mater Sci Technol 2023; 37: 107441.
30. Tavakkoli V, Mazilkin A, Scherer T, et al. Instability of a molybdenum layer under deformation of a CuMoCu laminate by high-pressure torsion. Mater Lett 2021; 302: 130378.10.1016/j.matlet.2021.130378 ↗
31. Vasiliev SV, Limanovskii A, Tkachenko VM, et al. Amorphous-crystalline Al-based laminates with enhanced plasticity produced by high pressure torsion. Mater Lett 2022; 318: 132155.10.1016/j.matlet.2022.132155 ↗
32. Ma XL, Huang CX, Xu WZ, et al. Strain hardening and ductility in a coarse-grain/nanostructure laminate material. Scr Mater 2015; 103: 57–60.10.1016/j.scriptamat.2015.03.006 ↗
33. Zhang J, Liang W, Li H. Effect of thickness of interfacial intermetallic compound layers on the interfacial bond strength and the uniaxial tensile behaviour of 5052 Al/AZ31B Mg/5052 Al clad sheets. RSC Adv 2015; 5: 104954–104959.10.1039/C5RA15357C ↗
34. Nie HH, Liang W, Chen HS, et al. A coupled EBSD/TEM study on the interfacial structure of Al/Mg/Al laminates. J Alloys Compd 2019; 781: 696–701.10.1016/j.jallcom.2018.11.366 ↗