journal article·2026-06-01

Comparative mechanical performance of honeycomb core structures fabricated via fused deposition modeling and 3D woven composite processing

Lekhani Tripathi, Pradeep Joshi, Dushyant Dubey, Bijoya Kumar Behera

Publisher page

Abstract

Honeycomb cores are critical for high-performance sandwich composites, yet their mechanical efficiency is highly dependent on the manufacturing method. This study presents a direct comparison of hexagonal honeycomb cores (9 cells, 20 mm height) fabricated via fused deposition modeling (FDM) of ABS and 3D weaving of E-glass yarns followed by epoxy infusion using vacuum-assisted resin infusion molding (VARIM). Identical cell geometries were tested under flatwise compression, edgewise compression, three-point bending, and low-velocity impact. Mechanical properties were normalized by mass and volume to assess specific structural efficiency. Results show that 3D woven honeycombs exhibit significantly superior specific strength, stiffness, and energy absorption across all loading conditions compared to FDM-ABS counterparts. The superior performance stems from continuous yarn interlacement, enabling progressive buckling and mixed-mode collapse with excellent damage tolerance. In contrast, FDM cores suffer from brittle interlayer delamination and rapid crack propagation due to weak interlayer bonding. These findings establish 3D weaving as a superior route for lightweight, high-performance honeycomb cores in weight-critical applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Amity University Uttar Pradesh

Indian Institute of Technology Delhi

References (45)

Show source-provided references
1. 10.1007/s10853-021-06302-510.1007/s10853-021-06302-5 ↗
2. Behera BK, Jain M, Tripathi L, et al. Low-velocity impact behaviour of textile-reinforced composite sandwich panels. In: Sandwich composites: fabrication and characterization. Boca Raton, FL: CRC Press, 2022, pp.213–260.
3. 10.1177/089270572199789210.1177/0892705721997892 ↗
4. 10.1515/cls-2018-000710.1515/cls-2018-0007 ↗
5. 10.1016/j.matdes.2009.06.01610.1016/j.matdes.2009.06.016 ↗
6. 10.1016/S0266-3538(00)00039-710.1016/S0266-3538(00)00039-7 ↗
7. 10.1016/j.compstruct.2006.10.00710.1016/j.compstruct.2006.10.007 ↗
8. 10.1016/j.ijmecsci.2004.04.00310.1016/j.ijmecsci.2004.04.003 ↗
9. 10.1016/S0065-2156(08)70164-910.1016/S0065-2156(08)70164-9 ↗
10. 10.1088/1757-899X/62/1/01201810.1088/1757-899X/62/1/012018 ↗
11. 10.4028/www.scientific.net/KEM.667.18110.4028/www.scientific.net/KEM.667.181 ↗
12. 10.1016/S0007-8506(07)61495-410.1016/S0007-8506(07)61495-4 ↗
13. 10.1016/j.compstruct.2017.05.00110.1016/j.compstruct.2017.05.001 ↗
14. Brischetto S, Ciano A, Ferro CG. A multipurpose modular drone with adjustable arms produced via the FDM additive manufacturing process. Curv Layer Struct 2016; 3: 202–213.
15. 10.1016/j.ast.2016.12.01910.1016/j.ast.2016.12.019 ↗
16. 10.1080/20550340.2017.130633710.1080/20550340.2017.1306337 ↗
17. 10.1016/S0921-5093(00)01810-410.1016/S0921-5093(00)01810-4 ↗
18. 10.1007/s11664-014-3425-610.1007/s11664-014-3425-6 ↗
19. 10.1108/1355254961073203410.1108/13552549610732034 ↗
20. 10.1177/1528083722112548310.1177/15280837221125483 ↗
21. 10.1080/15376494.2023.219941510.1080/15376494.2023.2199415 ↗
22. 10.1080/02670836.2023.218060110.1080/02670836.2023.2180601 ↗
23. 10.1007/s40964-021-00195-110.1007/s40964-021-00195-1 ↗
24. 10.1017/CBO978113987832610.1017/CBO9781139878326 ↗
25. 10.1177/152808372093147210.1177/1528083720931472 ↗
26. 10.1177/1099636222112204710.1177/10996362221122047 ↗
27. 10.1080/00405167.2024.231818210.1080/00405167.2024.2318182 ↗
28. Gibson LJ, Ashby MF. Cellular solids: structure and properties. Oxford, UK: Pergamon Press, 1988.
29. Panda B, Leite M, Biswal B, et al. Experimental and numerical modelling of mechanical properties of 3D printed honeycomb structures. Elsevier 2018; 116: 495–506.
30. Bitzer T. Honeycomb transportation applications. Warrendale, PA: SAE International, 1988
31. 10.1108/1355254021044116610.1108/13552540210441166 ↗
32. 10.1108/1355254081086202810.1108/13552540810862028 ↗
33. 10.1016/j.commatsci.2008.09.01710.1016/j.commatsci.2008.09.017 ↗
34. 10.1016/0734-743X(83)90004-010.1016/0734-743X(83)90004-0 ↗
35. 10.1016/j.matdes.2012.10.05010.1016/j.matdes.2012.10.050 ↗
36. 10.1080/13588265.2023.227230410.1080/13588265.2023.2272304 ↗
37. 10.1016/S0263-8223(02)00087-910.1016/S0263-8223(02)00087-9 ↗
38. 10.1016/0020-7403(92)90013-710.1016/0020-7403(92)90013-7 ↗
39. 10.1016/j.compositesb.2013.12.04910.1016/j.compositesb.2013.12.049 ↗
40. 10.1007/978-94-011-5856-510.1007/978-94-011-5856-5 ↗
41. 10.1016/S1359-835X(99)00034-210.1016/S1359-835X(99)00034-2 ↗
42. 10.1080/00405000.2023.220190910.1080/00405000.2023.2201909 ↗
43. 10.1016/j.matdes.2017.03.06510.1016/j.matdes.2017.03.065 ↗
44. Bilisik K. Three-dimensional braiding for composites: a review. journals.Sagepub.com 2013; 83: 1414–1436.
45. 10.1016/j.addma.2016.11.00710.1016/j.addma.2016.11.007 ↗