Experimental investigation of cavitation erosion mechanisms and performance in microwave-cladded NiCrSiC-5Mo composites
Source abstract
Abstract
Cavitation causes rapid surface degradation, material loss, and reduced service life in propellers and other marine components, making it a critical operational challenge. AISI 420 stainless steel, commonly used in small vessel propellers and industrial equipment, is especially vulnerable under such conditions. In this work, the wear resistance of AISI 420 was improved by applying a microwave-processed composite cladding. Nickel powder reinforced with molybdenum was deposited onto the steel surface using microwave hybrid heating, a process that provides uniform heating and strong metallurgical bonding. The clads were studied using SEM/EDS and XRD, and their porosity and hardness were carefully measured. The treated surface showed nearly double the hardness compared to the base metal, increasing from about 310 ± 20 HV for the substrate to 591.53 ± 20 HV after cladding. Cavitation tests using a vibratory erosion setup confirmed that this improvement translated into better real-world performance. The reinforced cladding significantly improved cavitation erosion resistance, reducing the erosion rate to 16.1%, a threefold improvement over the untreated clad (49.43%). SEM analysis of the eroded surfaces revealed characteristic damage features, including pits, craters, micro-cracks, and plastic deformation, and confirmed that reinforcement induced a transition from ductile to brittle wear behavior.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Microwave-Assisted Synthesis and Applications · Cavitation Phenomena in Pumps
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Delhi Skill and Entrepreneurship University
References (54)
Show source-provided references
1. Baši BB. Propeller optimization in Marine power systems : Exploring its contribution and correlation with renewable energy solutions.
2. 10.1007/s12393-025-09419-410.1007/s12393-025-09419-4 ↗
3. 10.1016/j.matpr.2019.07.41810.1016/j.matpr.2019.07.418 ↗
4. 10.1016/j.wear.2019.02.01710.1016/j.wear.2019.02.017 ↗
5. 10.1201/9781003566953-610.1201/9781003566953-6 ↗
6. 10.5604/01.3001.0016.161610.5604/01.3001.0016.1616 ↗
7. 10.1016/j.aej.2023.02.01010.1016/j.aej.2023.02.010 ↗
8. Singh V, Goyal DK, Kumar V, et al. Mechanical, metallurgical, and cavitation–corrosion analysis of WC-NiCrBSi cermet coating developed via. Laser cladding. J Therm Spray Technol 2025; 2025: 1–21.
9. 10.1016/j.rinp.2018.12.00710.1016/j.rinp.2018.12.007 ↗
10. 10.1016/j.jallcom.2025.18176910.1016/j.jallcom.2025.181769 ↗
11. 10.1016/j.surfcoat.2025.13225310.1016/j.surfcoat.2025.132253 ↗
12. 10.1016/j.wear.2012.11.04910.1016/j.wear.2012.11.049 ↗
13. 10.1016/j.wear.2009.01.03510.1016/j.wear.2009.01.035 ↗
14. 10.3390/COATINGS809030710.3390/COATINGS8090307 ↗
15. 10.1016/j.wear.2017.06.00310.1016/j.wear.2017.06.003 ↗
16. 10.1115/1.403304910.1115/1.4033049 ↗
17. 10.1016/j.matdes.2016.08.05410.1016/j.matdes.2016.08.054 ↗
18. 10.1177/0954406223116451710.1177/09544062231164517 ↗
19. 10.1016/j.wear.2023.20489710.1016/j.wear.2023.204897 ↗
20. 10.1016/j.wear.2015.08.00910.1016/j.wear.2015.08.009 ↗
21. 10.1016/j.engfailanal.2017.02.00710.1016/j.engfailanal.2017.02.007 ↗
22. 10.1007/s11665-023-07998-z10.1007/s11665-023-07998-z ↗
23. 10.1007/s11665-014-1244-910.1007/s11665-014-1244-9 ↗
24. 10.1177/095440891141465210.1177/0954408911414652 ↗
25. 10.1016/j.surfcoat.2023.12959210.1016/j.surfcoat.2023.129592 ↗
26. 10.1016/j.triboint.2026.11177510.1016/j.triboint.2026.111775 ↗
27. 10.1016/j.msea.2004.09.03510.1016/j.msea.2004.09.035 ↗
28. 10.1016/j.matchar.2025.11588410.1016/j.matchar.2025.115884 ↗
29. 10.3390/ma1318406710.3390/ma13184067 ↗
30. 10.1177/2516598424128100810.1177/25165984241281008 ↗
31. Verma YK Singh K Sandeep Bansal SK. Microwave processing of materials a sustainable manufacturing approach. 2024.
32. 10.1177/0954405421102136010.1177/09544054211021360 ↗
33. Kumar Y Kanwarjeet V. Exploring rare earth impact on mechanical and metallurgical properties of microwave-processed NiCrSiC-La2 O3 composite clads. Prod Eng 2026; 20: 1–15.10.1007/s11740-025-01384-5 ↗
34. 10.1080/10426914.2017.140172410.1080/10426914.2017.1401724 ↗
35. 10.1177/095440541666690010.1177/0954405416666900 ↗
36. Mago J, Bansal S, Gupta D, et al. Cavitation erosion behavior of microwave-processed Ni–40Cr3C2 composite clads: a parametric investigation using ultrasonic apparatus. Proc Inst Mech Eng Part L J Mater Des Appl 2021; 235: 265–292.
37. 10.1016/j.wear.2019.01.07210.1016/j.wear.2019.01.072 ↗
38. 10.1177/095440622094034810.1177/0954406220940348 ↗
39. 10.1016/j.matdes.2026.11559410.1016/j.matdes.2026.115594 ↗
40. 10.36922/MSAM02522004310.36922/MSAM025220043 ↗
41. 10.1016/j.triboint.2022.10796910.1016/j.triboint.2022.107969 ↗
42. 10.1007/s41230-024-3072-310.1007/s41230-024-3072-3 ↗
43. 10.1016/j.wear.2019.03.02210.1016/j.wear.2019.03.022 ↗
44. 10.1063/1.502963610.1063/1.5029636 ↗
45. 10.1016/j.mtcomm.2025.11172910.1016/j.mtcomm.2025.111729 ↗
46. Bansal S, Verma YK, Kumar P, et al. Different techniques used for characterizing nanomaterials. In Nanomaterials for Smart Manufacturing. 1. CRC Press, 2026, pp.60–75.
47. 10.1016/j.wear.2018.12.01610.1016/j.wear.2018.12.016 ↗
48. 10.3390/ma1606220910.3390/ma16062209 ↗
49. 10.1016/j.ijlmm.2021.10.00210.1016/j.ijlmm.2021.10.002 ↗
50. 10.1088/2053-1591/ab11ea10.1088/2053-1591/ab11ea ↗
51. 10.1177/0267084425140950910.1177/02670844251409509 ↗
52. 10.1016/j.rsurfi.2024.10041310.1016/j.rsurfi.2024.100413 ↗
53. 10.1515/adms-2017-002810.1515/adms-2017-0028 ↗
54. 10.1016/j.triboint.2022.10761510.1016/j.triboint.2022.107615 ↗