Effect of multi-directional forging in a closed die after extrusion on Gd and Y added AZ61 Mg alloy
Source abstract
Abstract
In this study, 0.5 and 1 wt.% Gadolinium (Gd) and Yttrium (Y) rare earth elements were added to the AZ61 magnesium alloy. The alloys were exposed to extrusion at 375°C, followed by multi-directional forging in a closed die at 400°C. The microstructural changes and mechanical properties of the alloy were examined. The addition of rare earth elements and the applied mechanical processes led to a significant reduction in grain size in the AZ61 cast alloy. The addition of Gd and Y promoted the formation of the Al 2 (Y,Gd) intermetallic structure, which contributed to heterogeneous nucleation and increased hardness. The extrusion and multi-directional forging processes further contributed to a fine-grained, equiaxed microstructure. As a result of the grain refinement, notable improvements in the mechanical properties were observed. In mechanical tests, samples with 0.5% Gd and 0.5% Y achieved the highest tensile strength (290 MPa) and hardness values (113 HV). In contrast, a slight decrease was observed with 1% additions, indicating that the optimal rare earth element content is 0.5%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Bilecik Şeyh Edebali University
Zonguldak Bulent Ecevit University
Brunel Centre for Advanced Solidification Technology, Brunel University of London, Uxbridge, UK
Necmettin Erbakan University
İstanbul Gelişim University
References (79)
Show source-provided references
1. 10.1016/j.net.2025.10356610.1016/j.net.2025.103566 ↗
2. 10.1016/j.matpr.2020.07.42410.1016/j.matpr.2020.07.424 ↗
3. 10.1007/s00170-007-1279-210.1007/s00170-007-1279-2 ↗
4. 10.5772/4827310.5772/48273 ↗
5. 10.34088/kojose.133449610.34088/kojose.1334496 ↗
6. 10.1038/s41598-021-97036-610.1038/s41598-021-97036-6 ↗
7. 10.3390/met501000110.3390/met5010001 ↗
8. Hoppe R, Kurz G, Letzig D. Substitution of rare earths in magnesium alloys. In: Materials Science Forum, of Conference, 2016, vol. 854, pp.51–56: Trans Tech Publ.
9. Salahi S. Low temperature behavior of ZK60 magnesium alloy after thermo-mechanical processing. 2017.
10. 10.1007/BF0267368710.1007/BF02673687 ↗
11. 10.1016/j.matdes.2011.01.04210.1016/j.matdes.2011.01.042 ↗
12. 10.1016/S0924-0136(03)00797-010.1016/S0924-0136(03)00797-0 ↗
13. 10.1016/j.msea.2017.02.10710.1016/j.msea.2017.02.107 ↗
14. 10.1016/j.jallcom.2018.02.24810.1016/j.jallcom.2018.02.248 ↗
15. 10.1016/j.matchemphys.2018.04.11010.1016/j.matchemphys.2018.04.110 ↗
16. 10.2320/matertrans.46.164610.2320/matertrans.46.1646 ↗
17. 10.2339/politeknik.151155710.2339/politeknik.1511557 ↗
18. 10.1016/j.jmatprotec.2007.11.30510.1016/j.jmatprotec.2007.11.305 ↗
19. 10.1016/S1003-6326(14)63528-710.1016/S1003-6326(14)63528-7 ↗
20. 10.3390/app14231098610.3390/app142310986 ↗
21. 10.3390/ma1502062710.3390/ma15020627 ↗
22. 10.1016/j.jallcom.2023.17180410.1016/j.jallcom.2023.171804 ↗
23. 10.1080/21663831.2023.223537510.1080/21663831.2023.2235375 ↗
24. 10.1016/j.jma.2020.06.00410.1016/j.jma.2020.06.004 ↗
25. 10.1016/j.jma.2013.02.00610.1016/j.jma.2013.02.006 ↗
26. 10.1016/j.pnsc.2021.06.00510.1016/j.pnsc.2021.06.005 ↗
27. Song XJ, Li QA, Fu SL. Effects of Y, Gd on microstructure and mechanical properties of AZ61 magnesium alloy. Adv Mat Res 2013; 800: 225–228.
28. 10.1016/j.msea.2015.07.02810.1016/j.msea.2015.07.028 ↗
29. 10.1016/j.rinp.2018.08.02810.1016/j.rinp.2018.08.028 ↗
30. 10.1016/j.jma.2021.01.00110.1016/j.jma.2021.01.001 ↗
31. 10.1016/j.jma.2014.11.00510.1016/j.jma.2014.11.005 ↗
32. 10.1016/j.jallcom.2025.17940510.1016/j.jallcom.2025.179405 ↗
33. 10.1016/S1003-6326(09)60293-410.1016/S1003-6326(09)60293-4 ↗
34. 10.2320/matertrans.M201325110.2320/matertrans.M2013251 ↗
35. 10.1007/s11665-019-04067-210.1007/s11665-019-04067-2 ↗
36. 10.1016/j.jallcom.2023.17022410.1016/j.jallcom.2023.170224 ↗
37. Şenel S, Koçar O, Kocaman E, et al. AISI 430 Çeliklerin Derin Kroyonejik İşlem Sonrası Mekanik ve Mikroyapısal Özelliklerinin İncelenmesi. Avrupa Bilim ve Teknoloji Dergisi 2021; 32: 1000–1005.
38. Kolhatkar AV Karthik V Divakar R et al. Development of ultra sub-size tensile specimen for evaluation of Tensile properties of irradiated materials. 2017.
39. 10.1016/j.proeng.2014.11.11210.1016/j.proeng.2014.11.112 ↗
40. 10.1016/j.mtcomm.2022.10470710.1016/j.mtcomm.2022.104707 ↗
41. 10.1016/j.jpcs.2019.03.02110.1016/j.jpcs.2019.03.021 ↗
42. 10.1016/j.jma.2019.03.00210.1016/j.jma.2019.03.002 ↗
43. 10.1016/j.msea.2006.11.09610.1016/j.msea.2006.11.096 ↗
44. 10.1016/j.jma.2022.03.00810.1016/j.jma.2022.03.008 ↗
45. Mezbahul-Islam M, Mostafa A, Medraj M. Essential magnesium alloys binary phase diagrams and their thermochemical data. J Mater 2014; 2014: 704283.
46. 10.1016/j.actamat.2011.02.04010.1016/j.actamat.2011.02.040 ↗
47. Zhang Y. Influence of intermetallic amount on the degradability of Mg-RE (Nd/Gd) alloys under physiological conditions. 2020.
48. Liu Z, et al. Effect of Al2Y phase on microstructure and deformation behavior of Mg-Al-Y Alloys: Insights from FIB-DIC technique. J Magnes Alloys 2025; Epub ahead of print 5 August 2025. DOI: 10.1016/j.jma.2025.07.004
49. 10.1007/s11661-015-3199-310.1007/s11661-015-3199-3 ↗
50. 10.1016/j.jallcom.2008.07.12810.1016/j.jallcom.2008.07.128 ↗
51. Zimina M, Málek P, Bohlen J, et al. Mechanical properties of homogenized twin-roll cast and conventionally cast AZ31 magnesium alloys. Mater Eng 2015; 22: 8–15.
52. 10.1016/j.msea.2008.07.01010.1016/j.msea.2008.07.010 ↗
53. 10.1016/j.jallcom.2022.16866510.1016/j.jallcom.2022.168665 ↗
54. 10.1007/BF0287341310.1007/BF02873413 ↗
55. 10.1016/j.jallcom.2012.01.08410.1016/j.jallcom.2012.01.084 ↗
56. 10.3390/cmd102000710.3390/cmd1020007 ↗
57. 10.1016/j.jallcom.2015.12.13310.1016/j.jallcom.2015.12.133 ↗
58. 10.1016/j.pnsc.2017.02.00410.1016/j.pnsc.2017.02.004 ↗
59. 10.1016/j.jma.2015.06.00310.1016/j.jma.2015.06.003 ↗
60. 10.1016/j.mtcomm.2023.10655110.1016/j.mtcomm.2023.106551 ↗
61. 10.30939/ijastech..123734510.30939/ijastech..1237345 ↗
62. 10.1016/j.msea.2022.14351310.1016/j.msea.2022.143513 ↗
63. 10.1016/j.msea.2013.04.01610.1016/j.msea.2013.04.016 ↗
64. 10.1557/jmr.2012.31310.1557/jmr.2012.313 ↗
65. 10.1016/S1359-6454(00)00094-X10.1016/S1359-6454(00)00094-X ↗
66. 10.1007/s40962-020-00472-910.1007/s40962-020-00472-9 ↗
67. Saha P, Viswanathan S. Grain refinement of magnesium by zirconium: characterization and analysis. Trans Am Foundry Soc 2011; 119: 469–480.
68. 10.1016/S1002-0721(10)60496-610.1016/S1002-0721(10)60496-6 ↗
69. Şahbaz M, Nalkıran S. Microstructural refinement and mechanical property enhancement of AZ91 magnesium alloy via room-temperature multi-directional forging. Sci Rep 2026; 16: 9745.
70. 10.1016/j.jmst.2017.07.02210.1016/j.jmst.2017.07.022 ↗
71. 10.1088/1361-651X/ac817110.1088/1361-651X/ac8171 ↗
72. 10.1007/s10853-018-2980-210.1007/s10853-018-2980-2 ↗
73. 10.1016/j.jma.2019.09.00410.1016/j.jma.2019.09.004 ↗
74. 10.1016/j.jmst.2021.01.01910.1016/j.jmst.2021.01.019 ↗
75. 10.1007/s11665-023-08674-y10.1007/s11665-023-08674-y ↗
76. 10.4028/www.scientific.net/AMM.204-208.416110.4028/www.scientific.net/AMM.204-208.4161 ↗
77. 10.1016/S1875-5372(10)60012-410.1016/S1875-5372(10)60012-4 ↗
78. 10.1179/026708310X1266841553388310.1179/026708310X12668415533883 ↗
79. 10.1016/S1002-0721(16)60072-810.1016/S1002-0721(16)60072-8 ↗