journal article·2026-05-05

Advanced microstructural analysis of CuCrZr and 304 stainless steel dissimilar welds via transmission electron microscopy

Chin-Chun Chang, Che-Kai Chan, Bo-Ying Chen, Ping-Shun Chuang, Hung-Bin Lee

Publisher page

Abstract

This study characterizes CuCrZr/304 stainless steel dissimilar welds using HR-TEM and EDS. A 1.5–2.0 μm interfacial diffusion layer was identified, driven primarily by Cu migration. Analysis confirmed the formation of brittle Fe-Cu intermetallic compounds (FeCu 3 , Fe 2 Cu 5 ) and significant sulfur segregation (FeS, Cu 2 S), leading to grain boundary embrittlement and hot cracking. Furthermore, high-density dislocation networks and twin boundaries indicated strain-induced martensitic transformation in the heat-affected zone. Based on these nanoscale insights, employing diffusion barriers and post-weld heat treatment is proposed to mitigate defects and enhance joint stability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instrumentation Development Division Vacuum Group, National Synchrotron Radiation Research Center, Hsinchu, Taiwan

National Taiwan Ocean University

References (28)

Show source-provided references
1. Guido GP, et al. Tokamak, fusion reactor device: Welding and joining for plasma facing components. EPJ Web Conf 2024;293: 1–6.
2. Chen H, Li X, Zhou J. High-energy beam welding of dissimilar metals: microstructure and mechanical properties. Mater Sci Eng A 2018; 720: 41–50.
3. Yang T, Zhao Y, Sun L. The effect of heat input on the microstructure and properties of CuCrZr and stainless steel welded joints. J Manuf Process 2019; 43: 22–30.
4. Singh P, Gupta R, Sharma A. Investigation on the mechanical and thermal properties of CuCrZr alloy. Mater Charact 2017; 129: 104–112.
5. Zhao F, Zhang W, Liu J. Microstructural evolution and mechanical properties of laser-welded CuCrZr/SS dissimilar joints. J Mater Sci Technol 2021; 98: 275–285.
6. Huang B, Tang Z, Cheng X. Welding of Cu and stainless steel: challenges and advancements. Weld J 2016; 95: 112–120.
7. Gao X, Wang L, Chen Y. The role of thermal expansion mismatch in CuCrZr/SS dissimilar welding. J Manuf Sci Eng 2020; 142: 1254–1262.
8. Tan R, Li H, Zhao Q. Formation of intermetallic compounds in Cu-Fe dissimilar welds. Mater Sci Forum 2015; 828: 78–85.
9. Zhang L, Sun H, Wu P. Investigation of the influence of intermetallic phases on the mechanical properties of CuCrZr/SS dissimilar joints. Mater Des 2018; 157: 265–275.
10. Chen CY, Ziyi L, Yupeng Z, et al. Microstructure and mechanical properties of copper/304 stainless steel joints welded by laser beam. Mater Rep 2019;33: 325–329.
11. Wang J, Li S, Xu B. Microstructural analysis of residual stress in CuCrZr/stainless steel weldments. Mater Sci Eng A 2017; 700: 334–343.
12. 10.1016/j.scriptamat.2015.06.02410.1016/j.scriptamat.2015.06.024 ↗
13. Li L, Messler RW. Segregation of phosphorus and sulfur in heat-affected zone hot cracking of type 308 stainless steel. Weld J 2002; 81(5): 78s–84s.
14. 10.3390/ma1520723410.3390/ma15207234 ↗
15. 10.3390/met1109148610.3390/met11091486 ↗
16. Smith K, Patel A, Jones M. Advances in dissimilar metal welding techniques: a review. Mater Today Proc 2017; 4: 6783–6792.
17. Patel R, Singh A, Kumar P. Effect of welding technique on microstructure and mechanical properties of CuCrZr/SS joints. Weld Int 2021; 35: 322–330.
18. Lin K, Wang J, Luo D. Influence of welding parameters on dissimilar CuCrZr/SS welds. Weld Join J 2019; 25: 54–62.
19. Chang CC, Wu LH, Shueh C, et al. Evaluation of microstructure and mechanical properties of dissimilar welding of copper alloy and stainless steel. Int J Adv Manuf Technol 2016; 85: 2145–2155.
20. Chen Q, Zhao L, Yuan R. Energy-dispersive spectroscopy mapping of diffusion zones in CuCrZr/SS joints. J Mater Eng Perform 2021; 30: 2416–2428.
21. Sun M, Zhou X, Tang Y. Transmission electron microscopy analysis of Cu-SS weld interfaces. Microsc Res Tech 2022; 85: 89–97.
22. Moharana BR, Sahu SK, Bathe R. Experimental investigation on CuCrZr/SS welding by CO2 laser. Eng Sci Technol Int J 2016; 19: 421–432.
23. Imani Y, Givi MK, Guillot M. Friction stir welding between Cu and stainless steel: an experimental approach. Adv Mat Res 2012; 189: 102–108.
24. Kim S, Park J, Lee H. Influence of interfacial reactions on the mechanical properties of Cu/stainless steel dissimilar joints. Metall Mater Trans A 2020; 51: 1234–1245.
25. 10.3390/cryst1202020710.3390/cryst12020207 ↗
26. 10.4028/www.scientific.net/DDF.323-325.17110.4028/www.scientific.net/DDF.323-325.171 ↗
27. Nakamura Y, Sato H, Takagi M. Martensitic transformations in stainless steel-CuCrZr welds. Mater Trans 2019; 60: 411–418.
28. Takahashi N, Fujiwara K, Yamaguchi S. Phase transformation and mechanical behavior of CuCrZr/SS dissimilar joints. Int J Adv Manuf Technol 2022; 119: 457–469.