journal article·2026-04-30

Q&P process induced pure-lath structure with dual-phase to optimize the strength-toughness of low-yield ratio HSLA steels

Chengyu Guo, Li Gong, Xin Liu, Chunduo Dai, Zhe Zhang

Publisher page

Abstract

In order to ensure security in the buildings, bridges and submarine pipelines, a good combination of high yield strength with a low yield ratio and excellent toughness should be achieved in the high-strength low-alloy (HSLA) steels. This study innovatively introduces salt-quenching combined with direct partitioning at 400 °C (Q&P-400) or 250 °C (Q&P-250) to produce a dual-phase structure of “hard” tempered martensite and “soft” bainite in a 0.16C-1.5Mn-1.5Ni-0.9Cu steel. Compared to the Q&P-400 sample, the Q&P-250 sample exhibited lower yield strength of ∼908 MPa but higher tensile strength of ∼1350 MPa, leading to a significantly lower yield ratio of 0.67 and improved low-temperature toughness of 65.5 J at −40 °C. The phase transformation during Q&P was analyzed by the OM, XRD, SEM, EBSD, TEM with EDS and thermal dilation. The superior mechanical performance is attributed to the pure-lath structure with large crystalline misorientation, which can effectively alleviate the interface sensitivity and hinder the crack propagation. The lath-structured bainite is transformed from retained austenite during partitioning process under the combined effects of elemental diffusion and coordinate deformation between recovery martensite. This new salt-bath Q&P treatment is notably more efficient and economical compared to the traditional off-line quenching and tempering (QT) method used for medium-thick plate production, which means the plates need to be transferred from the hot rolling line to the quenching line for the following heat treatment. This study presents a HSLA steel with low alloying contents and an on-line Q&P method with short process and low energy consumption for medium-thick plates production.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Metallic Materials for Marine Equipment and Applications

Ansteel Group Beijing Research Institute Co.LTD

Ansteel Iron & Steel Research Institutes, Anshan 114009, Liaoning, China

Funding

National Natural Science Foundation of China · China Association for Science and Technology · China Postdoctoral Science Foundation · National Postdoctoral Program for Innovative Talents

References (39)

Show source-provided references
1. 10.1016/j.msea.2021.14235610.1016/j.msea.2021.142356 ↗
2. 10.1016/j.msea.2019.13868310.1016/j.msea.2019.138683 ↗
3. 10.2355/isijinternational.ISIJINT-2020-44210.2355/isijinternational.ISIJINT-2020-442 ↗
4. 10.1016/j.msea.2021.14193410.1016/j.msea.2021.141934 ↗
5. 10.1016/j.jmst.2017.11.02010.1016/j.jmst.2017.11.020 ↗
6. 10.1016/j.msea.2022.14421110.1016/j.msea.2022.144211 ↗
7. 10.1016/j.msea.2016.08.08710.1016/j.msea.2016.08.087 ↗
8. 10.1016/j.msea.2013.10.00610.1016/j.msea.2013.10.006 ↗
9. 10.1016/j.scriptamat.2018.06.04210.1016/j.scriptamat.2018.06.042 ↗
10. 10.1007/s11661-016-3389-710.1007/s11661-016-3389-7 ↗
11. 10.1007/s40195-016-0496-910.1007/s40195-016-0496-9 ↗
12. 10.1016/j.msea.2022.14295910.1016/j.msea.2022.142959 ↗
13. 10.2355/isijinternational.41.59910.2355/isijinternational.41.599 ↗
14. 10.1126/science.aba941310.1126/science.aba9413 ↗
15. 10.1016/j.msea.2022.14453710.1016/j.msea.2022.144537 ↗
16. 10.1016/j.msea.2022.14370310.1016/j.msea.2022.143703 ↗
17. 10.1007/s10853-021-06068-w10.1007/s10853-021-06068-w ↗
18. 10.1016/j.matlet.2021.12949110.1016/j.matlet.2021.129491 ↗
19. 10.1016/j.actamat.2018.12.01910.1016/j.actamat.2018.12.019 ↗
20. 10.1016/j.msea.2021.14204510.1016/j.msea.2021.142045 ↗
21. Wang C, Wang M, Shi J, et al. Effect of Microstructure Refinement on the Strength and Toughness of Low Alloy Martensitic Steel[J]. J Mater Sci Technol 2007; 23: 659–664.
22. 10.1016/j.jallcom.2016.03.10010.1016/j.jallcom.2016.03.100 ↗
23. 10.1007/BF0265656510.1007/BF02656565 ↗
24. Bleck W. Materials Science of Steel. Achen: Steel Institute RWTH Aachen University, 2016.
25. 10.1016/j.msea.2017.11.04610.1016/j.msea.2017.11.046 ↗
26. 10.1016/S1006-706X(17)30162-010.1016/S1006-706X(17)30162-0 ↗
27. 10.1016/S1359-6462(02)00345-710.1016/S1359-6462(02)00345-7 ↗
28. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
29. 10.1016/j.msea.2014.02.05810.1016/j.msea.2014.02.058 ↗
30. 10.1016/j.msea.2019.13868310.1016/j.msea.2019.138683 ↗
31. 10.1016/j.msea.2018.03.11910.1016/j.msea.2018.03.119 ↗
32. 10.1016/j.msea.2009.05.04610.1016/j.msea.2009.05.046 ↗
33. 10.1016/S0921-5093(99)00288-910.1016/S0921-5093(99)00288-9 ↗
34. 10.1016/j.actamat.2010.06.02810.1016/j.actamat.2010.06.028 ↗
35. 10.1016/j.msea.2018.05.08310.1016/j.msea.2018.05.083 ↗
36. 10.1016/j.msea.2022.14307010.1016/j.msea.2022.143070 ↗
37. 10.1016/j.jmrt.2023.08.22610.1016/j.jmrt.2023.08.226 ↗
38. 10.1007/s11661-020-06119-y10.1007/s11661-020-06119-y ↗
39. 10.1007/s11661-001-1009-610.1007/s11661-001-1009-6 ↗