journal article·2026-05-04

Evaluating the effect of discarded tube light particle filler on the mechanical performance of epoxy/novel crown root fiber bio-composites

Baranitharan Paramasivam, Elaiyarasan Uthirapathi, Sriariyanun Malinee, Balaji Narayanasamy Shanmugam

Publisher page

Abstract

This study examines the mechanical performance of epoxy bio-composites reinforced with crown root fiber (CRF) and embedded with waste tube light particles (WTP) using a Taguchi L27 orthogonal design. The composites were fabricated by compression molding with varying fiber length (20, 35, 50 mm), fiber content (40, 50, 60 wt.%), and filler content (3, 6, 9 wt.%). Mechanical characteristics were assessed in accordance with ASTM standards, and regression models combined with analysis of variance (ANOVA) were applied to analyse parameter significance. The results revealed that flexural strength attained a maximum of 38 MPa under the optimized reinforcing conditions, while tensile strength, impact strength peaked at 32.5 MPa and 47.5 J/m, respectively for fiber length of 35 mm, fiber weight fraction of 50 wt% and filler content of 6 wt.%. The study demonstrates the potential of integrating e-waste fillers and agricultural residues into epoxy composites, thereby improving mechanical performance while contributing to sustainable and eco-friendly materials development for structural applications. The developed composites are useful for low-load structural components, car interiors, construction panels, packing, and other lightweight structural applications. They can also be used as economical material solutions by substituting waste materials for traditional fillers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Scientific and Engineering Research Topics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

King Mongkut’s University of Technology North Bangkok

Rajalakshmi Institute of Technology

School of Mechanical Engineering, SRM Institute of Science & Technology, Tiruchirappalli, India

Funding

King Mongkut’s University of Technology North Bangkok and the National Science, Research and Innovation Fund

References (60)

Show source-provided references
1. 10.3390/polym1417369810.3390/polym14173698 ↗
2. 10.1177/0892705724125432410.1177/08927057241254324 ↗
3. 10.3390/su1603122310.3390/su16031223 ↗
4. 10.1007/s43939-025-00421-510.1007/s43939-025-00421-5 ↗
5. 10.3390/polym1703027110.3390/polym17030271 ↗
6. 10.1016/j.jhazmat.2021.12566410.1016/j.jhazmat.2021.125664 ↗
7. 10.3390/su15131040510.3390/su151310405 ↗
8. 10.1016/j.istruc.2023.05.01810.1016/j.istruc.2023.05.018 ↗
9. 10.3390/min1409094310.3390/min14090943 ↗
10. 10.1080/23311916.2023.227920910.1080/23311916.2023.2279209 ↗
11. 10.1080/23311916.2023.225794910.1080/23311916.2023.2257949 ↗
12. 10.1088/2053-1591/ada87510.1088/2053-1591/ada875 ↗
13. 10.3390/molecules3015306210.3390/molecules30153062 ↗
14. 10.1016/j.matpr.2018.01.10110.1016/j.matpr.2018.01.101 ↗
15. 10.3390/ma1811242610.3390/ma18112426 ↗
16. 10.1007/s44199-024-00093-910.1007/s44199-024-00093-9 ↗
17. 10.1038/s41598-024-55817-910.1038/s41598-024-55817-9 ↗
18. 10.1016/j.dajour.2024.10047910.1016/j.dajour.2024.100479 ↗
19. 10.3390/polym1306086410.3390/polym13060864 ↗
20. 10.1016/j.matpr.2022.05.13910.1016/j.matpr.2022.05.139 ↗
21. Marichelvam MK, Kumar CL, Kandakodeeswaran K, et al. Investigation on mechanical properties of novel natural fiber-epoxy resin hybrid composites for engineering structural applications. Case Stud Construct Mater 2023; 19: e02356.
22. 10.1007/s10965-024-04018-z10.1007/s10965-024-04018-z ↗
23. 10.1016/j.rineng.2025.10501010.1016/j.rineng.2025.105010 ↗
24. 10.1177/0967391126142429310.1177/09673911261424293 ↗
25. 10.1088/2053-1591/aaf8d610.1088/2053-1591/aaf8d6 ↗
26. 10.1016/j.heliyon.2024.e3911610.1016/j.heliyon.2024.e39116 ↗
27. 10.1016/j.rineng.2025.10499610.1016/j.rineng.2025.104996 ↗
28. 10.1016/j.jmrt.2026.02.08710.1016/j.jmrt.2026.02.087 ↗
29. 10.1002/pc.2832710.1002/pc.28327 ↗
30. 10.1016/j.jobe.2025.11374510.1016/j.jobe.2025.113745 ↗
31. Altawil H, Olgun M. Optimization of mechanical properties of geopolymer mortar based on class C fly ash and silica fume: a Taguchi method approach. Case Stud Construct Mater 2025; 22: e04332.
32. 10.1016/j.egyr.2024.04.07010.1016/j.egyr.2024.04.070 ↗
33. 10.1016/j.ijimpeng.2024.10510110.1016/j.ijimpeng.2024.105101 ↗
34. 10.1680/jemmr.23.0009310.1680/jemmr.23.00093 ↗
35. Dinesh S, Balasubramani S, Pradeepkumar AR, et al. Development and performance evaluation of epoxy-based hybrid composites for sustainable personal protective equipment in automotive application. Mater Technol 2025; 59: 187–193.
36. 10.3390/polym1622311310.3390/polym16223113 ↗
37. 10.1002/advs.20230807010.1002/advs.202308070 ↗
38. 10.1080/09276440.2024.230354310.1080/09276440.2024.2303543 ↗
39. 10.3390/biomimetics909054510.3390/biomimetics9090545 ↗
40. 10.1016/j.nexres.2025.10041410.1016/j.nexres.2025.100414 ↗
41. 10.1002/adem.20240139210.1002/adem.202401392 ↗
42. 10.1016/j.conbuildmat.2016.12.09410.1016/j.conbuildmat.2016.12.094 ↗
43. Zhang Z, Hu C, Qin QH. The improvement of void and interface characteristics in fused filament fabrication-based polymers and continuous carbon fiber-reinforced polymer composites: a comprehensive review. Int J Adv Manuf Technol 2025; 137: 1–41.
44. 10.3390/f911070310.3390/f9110703 ↗
45. 10.1080/09276440.2021.187844110.1080/09276440.2021.1878441 ↗
46. 10.1515/epoly-2022-008010.1515/epoly-2022-0080 ↗
47. 10.1016/j.compscitech.2006.03.01310.1016/j.compscitech.2006.03.013 ↗
48. 10.1080/09506608.2018.150117110.1080/09506608.2018.1501171 ↗
49. 10.1016/j.compstruct.2016.01.09810.1016/j.compstruct.2016.01.098 ↗
50. 10.1007/BF0111600510.1007/BF01116005 ↗
51. 10.3390/jcs704014110.3390/jcs7040141 ↗
52. 10.1016/j.compositesb.2025.11212710.1016/j.compositesb.2025.112127 ↗
53. 10.1016/j.rineng.2024.10297410.1016/j.rineng.2024.102974 ↗
54. 10.1007/s10163-024-02142-y10.1007/s10163-024-02142-y ↗
55. Vijayananth K, Paramasivam B, Raju S. Measurement of mechanical and thermal performance of cigarette filter fibres/eggshell particles reinforced polymer composite using integrated CRITIC-TODIM approach. Measurement ( Mahwah N J) 2024; 228: 114251.
56. 10.1002/ep.1438210.1002/ep.14382 ↗
57. Sumesh KR, Ajithram A, Palanisamy S, et al. Mechanical properties of ramie/flax hybrid natural fiber composites under different conditions. Biomass Convers Biorefin 2023; 14: 29579–29590.
58. 10.1007/s41939-023-00301-610.1007/s41939-023-00301-6 ↗
59. 10.1002/ep.7016510.1002/ep.70165 ↗
60. 10.1007/s41939-025-00787-210.1007/s41939-025-00787-2 ↗