Microstructure and mechanical behavior of friction stir spot welded AA2017-T351 aluminum alloy
Source abstract
Abstract
Friction Stir Spot Welding process (FSSW) is a distinct variant of Friction Stir Welding (FSW) that has been proven to be effective in various industrial applications. In this paper, FSSW joint on overlapped 3-mm-thick AA2017-T351 sheets aluminum alloy, welded with 1500 rpm as tool rotational speed, 5 mm/min plunge rate, 15 s as dwell time and 5.2 mm plunge depth, was investigated. Microstructural observations, microhardness measurements, tensile/shear tests and fractography of the spot weld were conducted. Results showed that thermal evolution and plastic deformation had a remarkable effect on the grain structure (the hardness is 124 HV at BM, decreases to 109 HV at HAZ/TMAZ and reaches 135 HV at SZ) and size (from typically 15 µm in BM to mainly under 2 µm in the SZ). The fully bonded region width was nearly 150 µm and the maximum tensile/shear load was 2.6 kN. Two types of fracture modes were analyzed following the tensile shear test, namely pull-out nugget and shear failure fracture mode.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering School of Sfax, University of Sfax
High School of Science and Technology of Hammam Sousse, University of Sousse, Sousse, Tunisia
Université de Lorraine, CNRS, Arts et Métiers Institute of Technology, LEM3, F-57000 Metz, France
References (49)
Show source-provided references
1. 10.1016/j.jmrt.2023.09.27410.1016/j.jmrt.2023.09.274 ↗
2. Musfirah AH, Jaharah AG. Magnesium and aluminum alloys in automotive industry. J Appl Sci Res 2012; 8: 4865–4875.
3. 10.4028/www.scientific.net/KEM.786.10410.4028/www.scientific.net/KEM.786.104 ↗
4. 10.1007/8611_2011_5610.1007/8611_2011_56 ↗
5. Ma ZY, Feng AH, Chen DL, et al. Recent advences in friction stir welding/ processing of aluminum alloys: microstructural evolution and mechanical propoerties. Crit Rev Solid State Mater Sci 2017; 43(4): 1–65.
6. 10.1016/j.mspro.2015.04.14710.1016/j.mspro.2015.04.147 ↗
7. 10.1016/j.actamat.2008.09.01110.1016/j.actamat.2008.09.011 ↗
8. 10.1016/j.matpr.2020.08.53210.1016/j.matpr.2020.08.532 ↗
9. 10.1007/s12541-017-0053-010.1007/s12541-017-0053-0 ↗
10. 10.1088/2631-8695/ac09d910.1088/2631-8695/ac09d9 ↗
11. 10.1111/j.1460-2695.2006.01096.x10.1111/j.1460-2695.2006.01096.x ↗
12. 10.3390/ma1311266410.3390/ma13112664 ↗
13. 10.1007/s40799-024-00751-810.1007/s40799-024-00751-8 ↗
14. Battina NM, Chirala HK, Vanthala VSP, et al. Experimental and finite element investigations on formability of friction stir welded tailor welds blanks of AA6061 and AA2017. Mater Today Proc 2023; 3: 1–10.
15. Da Costa Gaspar R. Torque and temperature analysis in FSSW of aluminum alloys. . Coimbra: PhD Thesis, Universidade de Coimbra, 2020.
16. 10.3390/ma1416437510.3390/ma14164375 ↗
17. 10.1080/00218464.2020.173657210.1080/00218464.2020.1736572 ↗
18. Kahraman F, Kahraman AD, Yolcu C, et al. Investigation of microstructures and mechanical properties of the joints which welded by the pinless tool and the designed tool to reduce the keyhole in the friction stir spot welding. European Journal of Engineering Science and Technology 2019; 2: 1–10.
19. 10.1016/j.jmatprotec.2010.04.00310.1016/j.jmatprotec.2010.04.003 ↗
20. 10.1016/j.heliyon.2023.e1475210.1016/j.heliyon.2023.e14752 ↗
21. Aydin H, Tuncel O, Umur Y, et al. Effect of welding parameters on microstructure and mechanical properties of aluminium alloy AA6082-T46 friction stir spot welds. Indian Journal of Engineering & Materials Sciences 2017; 24: 215–227.
22. 10.1007/s12540-019-00416-x10.1007/s12540-019-00416-x ↗
23. 10.1007/s11661-007-9155-010.1007/s11661-007-9155-0 ↗
24. Mubiayi MP. Current developments in friction stir welding (FSW) and friction stir spot welding (FSSW) of aluminium and titanium alloys. Eng Proc 2023; 56: 184.
25. 10.1007/s11665-013-0640-x10.1007/s11665-013-0640-x ↗
26. Abbasi M, Abdollahzadeh A, Bagheri B, et al. Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy. J Mat Design Appl 2021; 235: 1809–1826.
27. 10.1016/j.jmrt.2015.01.00110.1016/j.jmrt.2015.01.001 ↗
28. 10.1016/j.heliyon.2021.e0600910.1016/j.heliyon.2021.e06009 ↗
29. 10.1007/s11665-013-0828-010.1007/s11665-013-0828-0 ↗
30. 10.1016/j.ijmachtools.2009.06.00110.1016/j.ijmachtools.2009.06.001 ↗
31. 10.1016/j.jmatprotec.2010.07.02910.1016/j.jmatprotec.2010.07.029 ↗
32. 10.1007/s00170-014-5632-y10.1007/s00170-014-5632-y ↗
33. 10.1007/s13632-020-00626-510.1007/s13632-020-00626-5 ↗
34. 10.1016/j.matchar.2011.12.00510.1016/j.matchar.2011.12.005 ↗
35. 10.3390/met906067210.3390/met9060672 ↗
36. Beausir B, Fundenberger JJ. Analysis tools for electron and X-ray diffraction, ATEX-software, www.atex-software.eu. France: Université de Lorraine - Metz, 2017.
37. 10.1179/136217109X42749410.1179/136217109X427494 ↗
38. 10.1016/j.jmatprotec.2010.03.02210.1016/j.jmatprotec.2010.03.022 ↗
39. 10.3390/jmmp605009510.3390/jmmp6050095 ↗
40. 10.1016/j.matdes.2011.08.05010.1016/j.matdes.2011.08.050 ↗
41. 10.1177/095440622093152710.1177/0954406220931527 ↗
42. 10.1115/1.213775110.1115/1.2137751 ↗
43. 10.1007/s11837-014-1117-610.1007/s11837-014-1117-6 ↗
44. 10.2478/amm-2014-003510.2478/amm-2014-0035 ↗
45. Kulekci MK, Esme U, Er O. Experimental comparison of resistance spot welding and friction stir spot welding process for the EN AW 5005 aluminum alloy. Materials and Technologies 2011; 45: 395–399.
46. 10.1016/j.jmatprotec.2010.12.01410.1016/j.jmatprotec.2010.12.014 ↗
47. 10.3390/met1008102810.3390/met10081028 ↗
48. 10.1016/j.jmatprotec.2016.12.01510.1016/j.jmatprotec.2016.12.015 ↗
49. 10.1016/j.dt.2020.03.00810.1016/j.dt.2020.03.008 ↗