Influence of different dispersants on the stability and sintering performance of ceramic slurries for DLP additive manufacturing
Source abstract
Abstract
This study systematically explored the effects of three dispersants on the stability of high solid content ceramic slurries, their printing performance and the properties of the ceramic parts obtained from them. The results show that although KH-570 can achieve a relatively low apparent viscosity of ceramic slurry through chemical bonding, its stability is poor and the sedimentation behavior is unfavorable for long term storage. BYK-110 significantly improves the stability of the slurry with its steric hindrance effect. It still maintains excellent dispersion at a solid content of 72 wt%, and the flexural strength of the sintered ceramic reaches 14.25 ± 0.39 MPa (1400°C), which is much higher than that provided by the KH-570 system at 5.60 ± 0.56 MPa (1400°C).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced ceramic materials synthesis · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xinjiang University
University of Padova
Funding
Xinjiang Tianchi Talent Introduction Plan · Tianshan Innovation Team Program of Xinjiang Uygur Autonomous Region · Fundamental Research Funds for Autonomous Region Universities · Natural Science Foundation of Xinjiang Uygur Autonomous Region
References (57)
Show source-provided references
1. Liu H, Zhang R-Z, Wu J-M, et al. Effect of al(OH)3 on the properties of silica-based ceramic cores prepared by laser powder bed fusion combined with vacuum infiltration. Addit Manuf 2024; 95: 104527.
2. 10.1007/s43207-024-00387-910.1007/s43207-024-00387-9 ↗
3. 10.1177/0267083624127207910.1177/02670836241272079 ↗
4. 10.1016/j.jeurceramsoc.2024.11701410.1016/j.jeurceramsoc.2024.117014 ↗
5. 10.1016/j.jpowsour.2024.23445410.1016/j.jpowsour.2024.234454 ↗
6. 10.1016/j.jmrt.2023.12.18610.1016/j.jmrt.2023.12.186 ↗
7. 10.1016/j.jeurceramsoc.2024.11704110.1016/j.jeurceramsoc.2024.117041 ↗
8. 10.1016/j.jeurceramsoc.2024.11686610.1016/j.jeurceramsoc.2024.116866 ↗
9. 10.1177/0267083624126247710.1177/02670836241262477 ↗
10. 10.1177/0267083624128093210.1177/02670836241280932 ↗
11. 10.1016/j.microrel.2024.11537310.1016/j.microrel.2024.115373 ↗
12. 10.1016/j.pnsc.2024.07.01310.1016/j.pnsc.2024.07.013 ↗
13. Sun H, Zou B, Quan T, et al. Multi-material ceramic hybrid additive manufacturing based on vat photopolymerization and material extrusion compound process. Addit Manuf 2025; 97: 104627.
14. 10.1016/j.jeurceramsoc.2023.07.03310.1016/j.jeurceramsoc.2023.07.033 ↗
15. 10.1038/s44334-024-00013-w10.1038/s44334-024-00013-w ↗
16. 10.1016/j.ceramint.2026.02.10310.1016/j.ceramint.2026.02.103 ↗
17. Xing H, Jiang W, Wang X, et al. Preparation and precision control of alumina-based ceramic core using the SLA-Micromilling hybrid process. Addit Manuf 2026; 118: 105095.
18. 10.1016/j.jmapro.2026.03.04210.1016/j.jmapro.2026.03.042 ↗
19. 10.1016/j.jmrt.2025.12.16310.1016/j.jmrt.2025.12.163 ↗
20. 10.3390/ma1811244510.3390/ma18112445 ↗
21. 10.1039/D3TB01236K10.1039/D3TB01236K ↗
22. 10.1016/j.tws.2025.11291810.1016/j.tws.2025.112918 ↗
23. 10.1016/j.ceramint.2024.08.08910.1016/j.ceramint.2024.08.089 ↗
24. 10.1016/j.cis.2024.10325110.1016/j.cis.2024.103251 ↗
25. 10.1111/ijac.1396510.1111/ijac.13965 ↗
26. 10.1016/j.ceramint.2024.10.38510.1016/j.ceramint.2024.10.385 ↗
27. 10.1016/j.ceramint.2024.08.35110.1016/j.ceramint.2024.08.351 ↗
28. Kim I, Kim S, Andreu A, et al. Influence of dispersant concentration toward enhancing printing precision and surface quality of vat photopolymerization 3D printed ceramics. Addit Manuf 2022; 52: 102659.
29. 10.1016/j.ceramint.2019.07.11810.1016/j.ceramint.2019.07.118 ↗
30. 10.1016/j.matlet.2024.13705710.1016/j.matlet.2024.137057 ↗
31. 10.1021/acsomega.2c0454110.1021/acsomega.2c04541 ↗
32. 10.1016/j.ceramint.2026.02.18910.1016/j.ceramint.2026.02.189 ↗
33. 10.1016/j.ceramint.2024.09.25810.1016/j.ceramint.2024.09.258 ↗
34. 10.1016/j.ceramint.2025.09.32310.1016/j.ceramint.2025.09.323 ↗
35. 10.1016/j.colsurfa.2012.01.01510.1016/j.colsurfa.2012.01.015 ↗
36. Ozkan B, Sameni F, Goulas A, et al. Hot ceramic lithography of silica-based ceramic cores: the effect of process temperature on vat-photopolymierisation. Addit Manuf 2022; 58: 103033.
37. Choe G-B, Koh Y-H. Vat photopolymerization of dual-scale porosity alumina honeycombs using phase-separable camphene porogen dissolved in binary photopolymer blends. Addit Manuf 2024; 85: 104162.
38. 10.1016/j.addma.2024.10413610.1016/j.addma.2024.104136 ↗
39. 10.1016/j.colsurfa.2025.13616710.1016/j.colsurfa.2025.136167 ↗
40. 10.1016/j.carbpol.2024.12301310.1016/j.carbpol.2024.123013 ↗
41. 10.1177/0267083625133780010.1177/02670836251337800 ↗
42. Lin L, Wu H, Lin K, et al. Effect of yttrium nitrate coating on the vat photopolymerization forming process and sintering properties of aluminum nitride ceramics. Addit Manuf 2024; 84: 104115.
43. 10.1016/j.ceramint.2023.10.05410.1016/j.ceramint.2023.10.054 ↗
44. 10.1016/j.addma.2022.10265010.1016/j.addma.2022.102650 ↗
45. Li Q, Hou W, Liang J, et al. Controlling the anisotropy behaviour of 3D printed ceramic cores: from intralayer particle distribution to interlayer pore evolution. Addit Manuf 2022; 58: 103055.
46. 10.1016/j.jmapro.2024.08.02710.1016/j.jmapro.2024.08.027 ↗
47. 10.1016/j.jallcom.2025.17967010.1016/j.jallcom.2025.179670 ↗
48. 10.1016/j.seppur.2024.13043210.1016/j.seppur.2024.130432 ↗
49. 10.1016/j.jasrep.2025.10511110.1016/j.jasrep.2025.105111 ↗
50. 10.1016/j.ceramint.2025.02.12010.1016/j.ceramint.2025.02.120 ↗
51. 10.3390/pr1011246710.3390/pr10112467 ↗
52. 10.1016/j.ceramint.2024.10.45410.1016/j.ceramint.2024.10.454 ↗
53. 10.3390/jcs603008210.3390/jcs6030082 ↗
54. 10.1051/matecconf/2016670304310.1051/matecconf/20166703043 ↗
55. 10.1016/j.jallcom.2024.17680910.1016/j.jallcom.2024.176809 ↗
56. 10.1016/j.addma.2023.10389810.1016/j.addma.2023.103898 ↗
57. 10.3390/ma1609328910.3390/ma16093289 ↗