journal article·2026-04-06

Enhancing on corrosion behavior of selective laser melted CoCrFeNiMn high entropy alloy via hot rolling: A comparative study with 316 stainless steel

Feng Han, Chunyang Li, Chenghao Li, Xinyi Huang, Yu Wang, Caimei Wang

Publisher page

Abstract

This study compares the microstructure, mechanical properties, and corrosion behavior of CoCrFeNiMn high-entropy alloy (HEA) and 316L stainless steel fabricated by selective laser melting (SLM), with a specific focus on the influence of hot rolling post-treatment. The results showed that as SLM-fabricated HEA exhibited a higher microhardness (198.15 Hv) than the 316L, which was further increased to 228.53 Hv after hot rolling due to grain refinement and increasing dislocation density. However, electrochemical testing in 3.5 wt.% NaCl revealed that unrolled HEA had the poorest corrosion resistance, exhibiting severe pitting. Hot rolling improved the HEA's corrosion resistance by eliminating defects and refining its microstructure. In contrast, 316L stainless steel exhibits the optimal pitting corrosion resistance due to its high content of Cr and Mo elements and uniform structure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing Institute of Petrochemical Technology

Daqing Oilfield Design Institute Co., Ltd, Daqing, China

Funding

National Natural Science Foundation of China · Young Elite Scientists Sponsorship Program by BAST

References (45)

Show source-provided references
1. Rth CC, Dejean TT, Mohr D. Plasticity and fracture of cast and SLM AlSi10Mg: high-throughput testing and modeling. Addit Manuf 2021; 43: 101998.
2. Wang JB, Zhou XL, Li JH, et al. Microstructures and properties of SLM-manufactured Cu-15Ni-8Sn alloy. Addit Manuf 2020; 31: 100921.
3. 10.1016/j.jmrt.2025.08.09810.1016/j.jmrt.2025.08.098 ↗
4. 10.1016/j.addma.2017.10.01510.1016/j.addma.2017.10.015 ↗
5. 10.1016/j.jmatprotec.2024.11866710.1016/j.jmatprotec.2024.118667 ↗
6. 10.1016/j.jmatprotec.2024.11843910.1016/j.jmatprotec.2024.118439 ↗
7. Hardes C, Pohl F, Rottger A, et al. Cavitation erosion resistance of 316L austenitic steel processed by selective laser melting (SLM). Addit Manuf 2019; 29: 100786.
8. 10.1016/j.corsci.2025.11319710.1016/j.corsci.2025.113197 ↗
9. 10.2174/012666145426529723110108154910.2174/0126661454265297231101081549 ↗
10. 10.1016/j.matdes.2016.05.03510.1016/j.matdes.2016.05.035 ↗
11. 10.1016/j.actamat.2020.08.03310.1016/j.actamat.2020.08.033 ↗
12. 10.1016/j.corsci.2023.11121410.1016/j.corsci.2023.111214 ↗
13. 10.1080/02670836.2023.222745910.1080/02670836.2023.2227459 ↗
14. 10.1016/j.mtcomm.2025.11324110.1016/j.mtcomm.2025.113241 ↗
15. 10.1016/j.apsusc.2025.16577310.1016/j.apsusc.2025.165773 ↗
16. 10.1007/s12540-025-01987-810.1007/s12540-025-01987-8 ↗
17. 10.1179/1743284715Y.000000002610.1179/1743284715Y.0000000026 ↗
18. 10.1016/j.jnucmat.2025.15587110.1016/j.jnucmat.2025.155871 ↗
19. Li X, Wang XQ, Dai XL, et al. Enhanced strength with retained ductility in SLM-processed high-entropy alloys via dislocation regulation in L2₁-BCC co-precipitate. Addit Manuf 2025; 109: 104899.
20. 10.1016/j.mtcomm.2024.10853910.1016/j.mtcomm.2024.108539 ↗
21. 10.1016/j.matdes.2025.11437410.1016/j.matdes.2025.114374 ↗
22. 10.1016/j.mtla.2025.10248410.1016/j.mtla.2025.102484 ↗
23. 10.1016/j.jmrt.2025.08.16010.1016/j.jmrt.2025.08.160 ↗
24. 10.1016/j.corsci.2023.11181110.1016/j.corsci.2023.111811 ↗
25. Wu SW, Gao C, He YT, et al. Development and application of a data-driven and mechanistic hybrid model for predicting the microstructure and property of hot-rolled Ti micro-alloyed steel, mater. Today Commun 2025; 48: 113292.
26. 10.1016/j.msea.2017.09.08910.1016/j.msea.2017.09.089 ↗
27. 10.1016/j.msea.2024.14743310.1016/j.msea.2024.147433 ↗
28. Naseri M, Peatskova S, Imantalab O, et al. Achieving ultrafine lamellar structure and exceptional electrochemical properties of Fe35Mn27Ni28Co5Cr5 high-entropy alloy through severe cold rolling process, mater. Today Commun 2024; 39: 109053.
29. 10.1016/j.msea.2024.14700410.1016/j.msea.2024.147004 ↗
30. 10.1016/j.surfcoat.2024.13157510.1016/j.surfcoat.2024.131575 ↗
31. 10.1016/j.jallcom.2025.18313410.1016/j.jallcom.2025.183134 ↗
32. 10.1016/j.actamat.2024.12042810.1016/j.actamat.2024.120428 ↗
33. 10.1016/j.msea.2025.14884110.1016/j.msea.2025.148841 ↗
34. 10.1016/j.electacta.2025.14704110.1016/j.electacta.2025.147041 ↗
35. 10.1016/j.jallcom.2025.18123810.1016/j.jallcom.2025.181238 ↗
36. 10.1016/j.jmrt.2024.07.11810.1016/j.jmrt.2024.07.118 ↗
37. 10.1016/j.jallcom.2023.17015310.1016/j.jallcom.2023.170153 ↗
38. 10.1016/j.matlet.2022.13272810.1016/j.matlet.2022.132728 ↗
39. 10.1016/j.corsci.2022.11039610.1016/j.corsci.2022.110396 ↗
40. 10.1016/j.electacta.2025.14610510.1016/j.electacta.2025.146105 ↗
41. 10.1016/j.matchemphys.2025.13136510.1016/j.matchemphys.2025.131365 ↗
42. 10.1016/j.jmrt.2023.05.17910.1016/j.jmrt.2023.05.179 ↗
43. 10.1016/j.corsci.2021.10925810.1016/j.corsci.2021.109258 ↗
44. 10.1016/j.corsci.2024.11237710.1016/j.corsci.2024.112377 ↗
45. 10.1016/j.corsci.2023.11160410.1016/j.corsci.2023.111604 ↗