journal article·2026-04-01

Microstructure and mechanical properties of fe-19Cr-10Ni-1Mn austenitic stainless steel after hot stamping

Chang Liu, Hongbang Shao, Yuanchun Huang, Zhengbing Xiao, Yu Liu, Zhangxi Wu

Publisher page

Abstract

To investigate the heterogeneity induced by hot stamping deformation, the microstructure and mechanical properties of Fe-19Cr-10Ni-1Mn austenitic stainless steel were characterized at different locations of the formed curved part. The grain misorientation angle distribution, texture evolution and grain boundaries character distributions at typical positions were investigated. Microstructure analysis demonstrates pronounced inhomogeneity in both grain structure and microtexture evolution across distinct deformation zones of the component, and a limited amount of martensitic transformation was induced in specific locations due to the large strain and subsequent rapid cooling. The combined analysis of stress-strain curves and microstructure reveals that the properties primarily depend on the uniform grain structure and high fraction of Σ3 twin boundaries, with minor contributions from dislocations and martensitic transformation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Central South University

Funding

National Key Research and Development Program of China

References (52)

Show source-provided references
1. 10.1007/s10853-024-10476-z10.1007/s10853-024-10476-z ↗
2. 10.1007/s10853-021-05969-010.1007/s10853-021-05969-0 ↗
3. 10.1016/j.matchar.2009.02.00110.1016/j.matchar.2009.02.001 ↗
4. 10.1016/j.msea.2006.12.11310.1016/j.msea.2006.12.113 ↗
5. 10.1007/s10853-021-06809-x10.1007/s10853-021-06809-x ↗
6. Hua L, Du Y, Qian D, et al. Influence of prior cold rolling on bainite transformation of high carbon bearing steel, metallurgical and materials transactions. A, Physical Metallurgy and Materials Science 2025; 56: 640–654.
7. 10.1016/j.matlet.2024.13634210.1016/j.matlet.2024.136342 ↗
8. 10.1007/s11771-012-1169-010.1007/s11771-012-1169-0 ↗
9. 10.1016/j.jmatprotec.2010.07.01910.1016/j.jmatprotec.2010.07.019 ↗
10. 10.1007/s11665-019-04325-310.1007/s11665-019-04325-3 ↗
11. Karbasian H, Brosius A, Tekkaya AE, et al. Numerical process design of hot stamping processes based on verified thermo-mechanical characteristics. Mater Sci Technol 2008; 3: 1733–1743.
12. 10.1016/S1005-0302(11)60076-510.1016/S1005-0302(11)60076-5 ↗
13. 10.1016/j.matdes.2015.04.00910.1016/j.matdes.2015.04.009 ↗
14. 10.1016/j.jmatprotec.2023.11798710.1016/j.jmatprotec.2023.117987 ↗
15. 10.1016/j.ijmecsci.2016.11.02210.1016/j.ijmecsci.2016.11.022 ↗
16. 10.1080/10426914.2022.203214010.1080/10426914.2022.2032140 ↗
17. 10.1016/j.msea.2022.14411410.1016/j.msea.2022.144114 ↗
18. 10.1016/j.msea.2021.14226910.1016/j.msea.2021.142269 ↗
19. 10.1016/j.msea.2022.14391410.1016/j.msea.2022.143914 ↗
20. 10.1080/02670836.2023.217662110.1080/02670836.2023.2176621 ↗
21. 10.1016/j.matchar.2023.11343410.1016/j.matchar.2023.113434 ↗
22. 10.1016/j.msea.2022.14450910.1016/j.msea.2022.144509 ↗
23. 10.1016/j.matchar.2022.11260110.1016/j.matchar.2022.112601 ↗
24. 10.1016/j.matchar.2017.09.02610.1016/j.matchar.2017.09.026 ↗
25. 10.1016/j.actamat.2025.12150310.1016/j.actamat.2025.121503 ↗
26. 10.1007/s11771-025-5947-x10.1007/s11771-025-5947-x ↗
27. 10.1007/s12540-018-0203-710.1007/s12540-018-0203-7 ↗
28. 10.1016/j.actamat.2004.11.00210.1016/j.actamat.2004.11.002 ↗
29. 10.1016/S1359-6454(02)00090-310.1016/S1359-6454(02)00090-3 ↗
30. 10.1016/j.msea.2014.11.05310.1016/j.msea.2014.11.053 ↗
31. 10.1007/s11771-022-5175-610.1007/s11771-022-5175-6 ↗
32. Zhang C, Juul Jensen D, Yu T. Microstructure and texture evolution during cold rolling of 316L stainless steel, metallurgical and materials transactions. A, Physical Metallurgy and Materials Science 2021; 52: 4100–4111.
33. 10.1016/j.matchar.2014.10.00610.1016/j.matchar.2014.10.006 ↗
34. 10.1016/j.jmst.2021.03.02010.1016/j.jmst.2021.03.020 ↗
35. 10.1016/j.ijplas.2015.07.00510.1016/j.ijplas.2015.07.005 ↗
36. 10.1016/j.ijhydene.2020.11.14810.1016/j.ijhydene.2020.11.148 ↗
37. 10.1007/s11665-018-3129-910.1007/s11665-018-3129-9 ↗
38. 10.1016/j.matchar.2020.11053810.1016/j.matchar.2020.110538 ↗
39. 10.1007/s10853-022-08077-910.1007/s10853-022-08077-9 ↗
40. Beck M, Morse M, Corolewski C, et al. Understanding the effect of grain boundary character on dynamic recrystallization in stainless steel 316L, metallurgical and materials transactions. A, Physical Metallurgy and Materials Science 2017; 48: 3831–3842.
41. 10.1007/s10853-017-1695-010.1007/s10853-017-1695-0 ↗
42. 10.1016/j.jmrt.2025.05.20610.1016/j.jmrt.2025.05.206 ↗
43. 10.1016/j.msea.2025.14901010.1016/j.msea.2025.149010 ↗
44. 10.1016/0001-6160(86)90068-410.1016/0001-6160(86)90068-4 ↗
45. 10.1016/j.msea.2021.14136310.1016/j.msea.2021.141363 ↗
46. Kaddour H, Belgacem L, Sakmeche M. Effect of preheat treatment on strain-induced martensite transformation in AISI 316Ti austenitic stainless steel. J MATER ENG PERFORM 2025; 8: 1–10.
47. 10.1016/j.msea.2013.04.04810.1016/j.msea.2013.04.048 ↗
48. 10.1016/j.jmrt.2025.03.28510.1016/j.jmrt.2025.03.285 ↗
49. 10.1179/1743284714Y.000000052510.1179/1743284714Y.0000000525 ↗
50. 10.3390/cryst1310151010.3390/cryst13101510 ↗
51. Zhang N, Zhang HW, Wang MH. Tensile mechanical properties of micro-selective Laser melted 316L stainless steel. ACTA METALL SIN 2024; 60: 211–219.
52. 10.1016/j.matchar.2024.11455610.1016/j.matchar.2024.114556 ↗