Critical assessment: Processing, microstructure and mechanical properties of Al-containing ferrite-based low-density steels
Source abstract
Abstract
Over the past three decades, research on aluminium (Al)-containing low-density steels (LDS) has accelerated due to their ∼8–15% lower density than conventional steels, increasing their demand in lightweight automotive applications, high-temperature applications and cryogenic uses such as storage tanks and spacecraft. This review focuses on Al-containing ferritic low-density steels (FLDS). It begins with a discussion of the formation of the κ-carbide and B2/DO 3 phases, the melting and casting route, followed by an overview of microstructural evolution. Furthermore, the elastic modulus, effects of microalloying elements on mechanical properties, deformation mechanisms and the influences of microstructure and strain-hardening behaviour on tensile properties are critically reviewed. Finally, future research directions for optimising the microstructure–mechanical property relationships in FLDS are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
IIT Kharagpur
Tata Steel
Jadavpur University
References (100+)
Show source-provided references
1. 10.1179/1879139514Y.000000013010.1179/1879139514Y.0000000130 ↗
2. Chen S, Rana R. Low-Density steels. In: Rana R (eds) High-performance ferrous alloys. New York: Springer Nature, 2020, pp.211–289.
3. 10.1016/j.pmatsci.2017.05.00210.1016/j.pmatsci.2017.05.002 ↗
4. 10.1016/j.scriptamat.2012.10.00410.1016/j.scriptamat.2012.10.004 ↗
5. 10.1016/j.dt.2022.11.01910.1016/j.dt.2022.11.019 ↗
6. 10.1051/metal:200011010.1051/metal:2000110 ↗
7. 10.2355/isijinternational.31.111310.2355/isijinternational.31.1113 ↗
8. 10.1023/B:JMSC.0000033399.47370.4f10.1023/B:JMSC.0000033399.47370.4f ↗
9. 10.1080/09500839.2013.81398110.1080/09500839.2013.813981 ↗
10. 10.1002/srin.20020002610.1002/srin.200200026 ↗
11. 10.1016/j.actamat.2011.01.05410.1016/j.actamat.2011.01.054 ↗
12. Yamamoto M, Taniguchi S. The density, magnetic properties, Young’s modulus, the density, magnetic properties, Young’s modulus, and DE-effect, and their change due to quenching in ferromagnetic iron-aluminium alloys. II: young’s modulus and the DE-effect. Sci Rep Res Inst Tohuku Univ Ser A 1956; 8: 193–204.
13. 10.1038/135741a010.1038/135741a0 ↗
14. Ham JL, Cairns REJr. Manganese joins aluminum to give strong stainless. Prod Eng 1958; 29: 50–51.
15. 10.1007/BF0065227110.1007/BF00652271 ↗
16. 10.1007/BF0266302610.1007/BF02663026 ↗
17. 10.1002/srin.20060644010.1002/srin.200606440 ↗
18. Howell RA. Microstructural influence on dynamic properties of age hardenable FeMnAl alloys. Mater Sci Eng 2009; PhD: 249.
19. 10.1088/1468-6996/14/1/01420510.1088/1468-6996/14/1/014205 ↗
20. 10.1007/s11837-014-1137-210.1007/s11837-014-1137-2 ↗
21. 10.1007/s11661-005-0302-110.1007/s11661-005-0302-1 ↗
22. 10.1007/s11661-005-0038-y10.1007/s11661-005-0038-y ↗
23. 10.1016/S1359-6462(02)00378-010.1016/S1359-6462(02)00378-0 ↗
24. 10.1016/j.msea.2015.06.09610.1016/j.msea.2015.06.096 ↗
25. 10.1007/s11837-014-1032-x10.1007/s11837-014-1032-x ↗
26. Gutiérrez-Urrutia DRI. High strength and ductile low density austenitic FeMnAlC steels: Simplex and alloys strengthened by nanoscale ordered carbides. 2014; 0836. doi: 10.1179/1743284714Y.000000051510.1179/1743284714Y.0000000515 ↗
27. 10.1016/j.actamat.2024.12056810.1016/j.actamat.2024.120568 ↗
28. 10.1016/j.actamat.2025.12145810.1016/j.actamat.2025.121458 ↗
29. 10.1016/j.actamat.2017.09.02610.1016/j.actamat.2017.09.026 ↗
30. 10.1016/j.actamat.2016.06.03710.1016/j.actamat.2016.06.037 ↗
31. 10.1080/21663831.2023.228432110.1080/21663831.2023.2284321 ↗
32. 10.1016/j.actamat.2022.11829610.1016/j.actamat.2022.118296 ↗
33. 10.1016/j.msea.2021.14095410.1016/j.msea.2021.140954 ↗
34. 10.1126/sciadv.aba954310.1126/sciadv.aba9543 ↗
35. 10.1016/j.msea.2019.13808810.1016/j.msea.2019.138088 ↗
36. 10.1016/j.actamat.2019.07.03610.1016/j.actamat.2019.07.036 ↗
37. Howell RA, Van Aken DC. A literature review of age hardening Fe-Mn-Al-C alloys. Iron Steel Technol 2009; 6: 193–212.
38. Scuseria T Garza K Pierce DT et al. A review of medium-Mn low-density steels for transportation applications. 2025; 56. doi: 10.1007/s11661-025-07775-810.1007/s11661-025-07775-8 ↗
39. Mohapatra S Satpathy B Sarkar A et al. Recent advances in medium-manganese steel: a review of key findings challenges and future perspectives. 2025; 60. Springer US. doi: 10.1007/s10853-025-11010-510.1007/s10853-025-11010-5 ↗
40. 10.1080/09506608.2023.219961710.1080/09506608.2023.2199617 ↗
41. 10.1177/0267083625141233710.1177/02670836251412337 ↗
42. Veis V, Likhatskyi I, Parkhomchuk Z. Lightweight Fe–Mn–Al–C steels: current state, manufacturing, and implementation prospects. Steel Res Int 2025; 2400904: 1–17.
43. 10.1016/j.jmrt.2023.06.03710.1016/j.jmrt.2023.06.037 ↗
44. 10.1007/s40195-021-01369-010.1007/s40195-021-01369-0 ↗
45. Hu S, Zheng Z, Yang W, et al. Fe–Mn–C–Al low-density steel for structural materials: a review of alloying, heat treatment, microstructure, and mechanical properties. Steel Res Int 2022; 2200191: 1–13.
46. 10.2355/isijinternational.ISIJINT-2020-46710.2355/isijinternational.ISIJINT-2020-467 ↗
47. 10.3390/met1008102110.3390/met10081021 ↗
48. 10.1007/s10853-018-2551-610.1007/s10853-018-2551-6 ↗
49. 10.1007/s11837-014-1126-510.1007/s11837-014-1126-5 ↗
50. 10.1007/s12666-009-0021-110.1007/s12666-009-0021-1 ↗
51. 10.3390/cryst601001010.3390/cryst6010010 ↗
52. 10.1023/B:JMSC.0000039298.29397.3a10.1023/B:JMSC.0000039298.29397.3a ↗
53. 10.1023/B:JMSC.0000044907.19670.6110.1023/B:JMSC.0000044907.19670.61 ↗
54. 10.1016/S0921-5093(00)00832-710.1016/S0921-5093(00)00832-7 ↗
55. 10.1179/174328407X15863110.1179/174328407X158631 ↗
56. 10.1016/S0921-5093(98)00861-210.1016/S0921-5093(98)00861-2 ↗
57. 10.1016/S0921-5093(97)00859-910.1016/S0921-5093(97)00859-9 ↗
58. 10.1007/s11837-014-1065-110.1007/s11837-014-1065-1 ↗
59. 10.1016/S0921-5093(98)00937-X10.1016/S0921-5093(98)00937-X ↗
60. Khaple S. Effect of alloying additions on the microstructure and mechanical properties of Fe Al based lightweight steel 2021.
61. 10.1016/j.msea.2010.07.05810.1016/j.msea.2010.07.058 ↗
62. 10.1007/s12034-019-1930-110.1007/s12034-019-1930-1 ↗
63. 10.1016/S1359-6462(01)01142-310.1016/S1359-6462(01)01142-3 ↗
64. 10.1016/S0921-5093(99)00796-010.1016/S0921-5093(99)00796-0 ↗
65. 10.1007/s12666-011-0105-610.1007/s12666-011-0105-6 ↗
66. 10.1016/S0966-9795(01)00106-610.1016/S0966-9795(01)00106-6 ↗
67. 10.1007/s12540-015-1009-510.1007/s12540-015-1009-5 ↗
68. 10.1016/j.actamat.2013.06.00410.1016/j.actamat.2013.06.004 ↗
69. 10.1007/s11661-024-07453-110.1007/s11661-024-07453-1 ↗
70. 10.1016/j.actamat.2014.04.03110.1016/j.actamat.2014.04.031 ↗
71. 10.1007/s11837-014-1084-y10.1007/s11837-014-1084-y ↗
72. 10.1007/s11665-022-06792-710.1007/s11665-022-06792-7 ↗
73. 10.1080/09500839.2013.87804610.1080/09500839.2013.878046 ↗
74. Hölscher M Raabe D Lücke K. Rolling and recrystalization texture of bcc steels 1991. doi: 10.1155/TSM.14-18.585.10.1155/TSM.14-18.585 ↗
75. 10.1016/S1359-6454(97)00046-310.1016/S1359-6454(97)00046-3 ↗
76. 10.1179/imr.1994.39.4.12910.1179/imr.1994.39.4.129 ↗
77. 10.1146/annurev-matsci-070218-12591110.1146/annurev-matsci-070218-125911 ↗
78. Kubaschewski O. Iron—binary phase diagrams. 1st ed. Berlin: Springer-Verlag, 1982.
79. 10.1016/j.jallcom.2020.15514010.1016/j.jallcom.2020.155140 ↗
80. 10.1016/S0966-9795(98)00050-810.1016/S0966-9795(98)00050-8 ↗
81. 10.1016/j.matchar.2025.11520510.1016/j.matchar.2025.115205 ↗
82. 10.1016/j.jallcom.2010.06.03210.1016/j.jallcom.2010.06.032 ↗
83. TCFE5 thermodynamic steel database http://www.thermocalc.se.
84. TCFE2000: The thermo-calc steels database upgraded by Byeong-Joo Lee and Bo Sundman at KTH Stockholm 1999.
85. Connetable D, Lacaze J, Maugis P, et al. A calphad assessment of Al-C-Fe system with the κ carbide modelled as an ordered form of the fcc phase. Calphad Comput Coupling Phase Diagrams Thermochem 2008; 32: 361–370.
86. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
87. 10.1179/02670830422501125210.1179/026708304225011252 ↗
88. 10.1179/174328407X15838910.1179/174328407X158389 ↗
89. 10.1016/j.msea.2014.08.06410.1016/j.msea.2014.08.064 ↗
90. 10.1007/s11661-012-1149-x10.1007/s11661-012-1149-x ↗
91. 10.1007/BF0264991610.1007/BF02649916 ↗
92. 10.1016/0966-9795(95)00003-H10.1016/0966-9795(95)00003-H ↗
93. 10.1016/j.scriptamat.2012.08.01310.1016/j.scriptamat.2012.08.013 ↗
94. 10.1016/j.matlet.2019.01.11510.1016/j.matlet.2019.01.115 ↗
95. 10.1016/j.jallcom.2013.05.13810.1016/j.jallcom.2013.05.138 ↗
96. 10.1016/j.msea.2020.13928610.1016/j.msea.2020.139286 ↗
97. 10.1007/s11661-013-2083-210.1007/s11661-013-2083-2 ↗
98. 10.1016/j.actamat.2009.02.04610.1016/j.actamat.2009.02.046 ↗
99. 10.1007/978-3-662-08024-5_1210.1007/978-3-662-08024-5_12 ↗
100. 10.1016/j.jallcom.2013.10.05810.1016/j.jallcom.2013.10.058 ↗