Intergranular and exfoliation corrosion behaviors of 2A97 Al-Li alloy via thermal exposure
Source abstract
Abstract
The effect of thermal exposure on the corrosion behavior of 2A97 Al-Li alloy was systematically investigated using electrochemical measurement, intergranular corrosion test, exfoliation corrosion test, and microstructural characterization. The results show thatthermal exposure leads to a progressive degradation of corrosion resistance for 2A97 Al-Li alloy, and thermal exposure temperature has a more obvious effect on its corrosion behavior than exposure time. With increasing thermal exposure temperature, the corrosion morphology changes from pitting corrosion to severe intergranular corrosion and deep exfoliation corrosion, accompanied by a significant increase in the corrosion depth and corrosion grade; moreover, the phase transformation from δ′ and θ′ phase into T1 phase is promoted during thermal exposure, and they are preferentially precipitated and coarsened along the grain boundaries; in addition, a large number of solute atoms are consumed because of the T1 phase growth, the precipitation free zones (PFZs) is continuously formed and widened at the grain boundaries, and then these PFZs act as anodic regions relative to the adjacent matrix. Therefore, the corrosion propagation is promoted along grain boundaries, and both intergranular corrosion and exfoliation corrosion are accelerated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an University of Architecture and Technology
National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, China
Beijing Engineering Consulting Co., Ltd of CARS, Beijing, China
Funding
Xi'an Science and Technology Program
References (30)
Show source-provided references
1. 10.1007/s11015-021-01134-910.1007/s11015-021-01134-9 ↗
2. Liu ZP, Xiao Y, Ma KJ. Development and research progress of aerospace Al-Li alloys. Trans Mater Heat Treatment 2023; 44: 8–17.
3. 10.1088/2631-8695/ad3a3710.1088/2631-8695/ad3a37 ↗
4. Yang SJ, Lu J, Feng ZH, et al. The history of Al-Li alloys and the research development in China. Mater Rev 2014; 28: 430–435.
5. 10.1016/S0010-938X(70)80003-810.1016/S0010-938X(70)80003-8 ↗
6. 10.5006/1.329360710.5006/1.3293607 ↗
7. Endre R, Popović M. Problems and prospect of Al-Mg alloys application in marine constructions. Metalurgija 2006; 12: 297–307.
8. 10.1016/j.jallcom.2007.06.07210.1016/j.jallcom.2007.06.072 ↗
9. 10.5006/1.329350010.5006/1.3293500 ↗
10. 10.1016/j.corsci.2018.05.01110.1016/j.corsci.2018.05.011 ↗
11. 10.1016/j.corsci.2016.12.00510.1016/j.corsci.2016.12.005 ↗
12. 10.1016/j.corsci.2009.10.00610.1016/j.corsci.2009.10.006 ↗
13. 10.1016/j.matchar.2006.03.00310.1016/j.matchar.2006.03.003 ↗
14. Yu J, Lu Z, Li GA, et al. Effect of Pre-stretching processing on the corrosion behavior of 2A97 Al -Li alloy. J Mater Sci Eng 2019; 37: 546–551.
15. 10.1016/S1003-6326(18)64910-610.1016/S1003-6326(18)64910-6 ↗
16. 10.1016/j.scriptamat.2008.09.02310.1016/j.scriptamat.2008.09.023 ↗
17. Sun QQ, Chen KH, Chen QY. Effect of heat treatment regime on electrochemical corrosion behavior of YB-containing aviation aluminum alloy. Chin J Nonferrous Met 2016; 26: 479–485.
18. 10.1016/0010-938X(82)90031-210.1016/0010-938X(82)90031-2 ↗
19. Chen YY, Zheng ZQ, Wei XY, et al. Intergranular corrosion and exfoliation corrosion behaviour of 2197 Al-Li alloy with different aging treatments. Corrosion & Protection 2010; 31: 29–33.
20. 10.1016/j.matchemphys.2004.11.03410.1016/j.matchemphys.2004.11.034 ↗
21. Yi YN, Ma YL, Luo XX, et al. Review on effect of alloy phases on localized corrosion of new generation aluminum-lithium alloys. J Chongqing Univ Technol (Nat Sci) 2017; 31: 50–57.
22. Li JF, Li HR, Wang ZA. Correlations between properties and structures of Al-Li alloys and novel alloy design. Mater China 2022; 41: 796–807.
23. Liu GL, Fang GL. Study on grain boundary segregation and corrosion mechanism of Al-Zn-Mg-Cu ultra-high strength aluminum alloy. Rare Met Mater Eng 2009; 38: 1598–1601.
24. 10.1016/j.corsci.2018.05.01110.1016/j.corsci.2018.05.011 ↗
25. Yang HJ, Tang JG, Liu JX, et al. Effect of Cu content on local corrosion behavior of Al-Li alloy. The Chinese J Nonferrous Met 2024; 34: 2559–2570.
26. 10.1557/jmr.2014.12110.1557/jmr.2014.121 ↗
27. 10.1016/j.jmrt.2024.03.21310.1016/j.jmrt.2024.03.213 ↗
28. 10.1016/j.matdes.2023.11162110.1016/j.matdes.2023.111621 ↗
29. 10.1016/j.jallcom.2024.17497310.1016/j.jallcom.2024.174973 ↗
30. 10.1016/j.jallcom.2015.10.18510.1016/j.jallcom.2015.10.185 ↗