journal article·2026-03-02

Effect of pulse current on the micro-segregation and micro-electrochemical impedance distribution of aluminum alloy 7075 gas tungsten arc weld

Shenglong Chen, Xusheng Liu, Suhong Zhang, Yu Zhang

Publisher page

Abstract

In this study, aluminum alloy 7075-T651 plates were welded using conventional variable polarity gas tungsten arc welding (VP-GTAW) and variable polarity GTAW with a pulse-current wave-coupled mode (CPVP-GTAW). In CPVP-GTAW, pulse frequencies of 1–2 Hz and duty ratios of 33–67% were applied while maintaining comparable heat input to that of VP-GTAW. A combination of optical microscopy, EPMA, EBSD, fish-bone crack testing, and localized electrochemical impedance spectroscopy was employed to systematically characterize microstructural evolution, solidification cracking susceptibility, and micro-electrochemical behavior. The coupled pulse waveform generated a periodically reheated mushy zone at the trailing edge of the weld pool, where the temperature was estimated to reach 476–632 °C within the semi-solid range. As a result, the solidification cracking susceptibility index decreased from 91 in VP-GTAW welds to 27 in optimized CPVP-GTAW welds. In addition, localized electrochemical impedance spectroscopy revealed a significantly reduced micro-scale impedance inhomogeneity in CPVP-GTAW welds, indicating improved local electrochemical stability. These results demonstrate that CPVP-GTAW effectively suppresses micro-segregation, mitigates solidification cracking, and homogenizes micro-electrochemical properties in 7075 aluminum alloy welds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Electromagnetic Effects on Materials · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Beijing University of Technology

Capital Aerospace Machinery Corporation Limited

Funding

National Natural Science Foundation of China

References (51)

Show source-provided references
1. 10.1080/02670836.2022.204554910.1080/02670836.2022.2045549 ↗
2. 10.1080/02670836.2023.219647110.1080/02670836.2023.2196471 ↗
3. 10.1179/174328405X5173010.1179/174328405X51730 ↗
4. 10.1007/s00170-022-09287-w10.1007/s00170-022-09287-w ↗
5. 10.1007/s00170-020-05231-y10.1007/s00170-020-05231-y ↗
6. 10.1007/s00170-020-05232-x10.1007/s00170-020-05232-x ↗
7. 10.1007/s12598-025-03543-010.1007/s12598-025-03543-0 ↗
8. 10.3390/ma1602072110.3390/ma16020721 ↗
9. 10.1016/j.mtcomm.2023.10680310.1016/j.mtcomm.2023.106803 ↗
10. 10.1016/j.jmrt.2023.08.13810.1016/j.jmrt.2023.08.138 ↗
11. 10.1016/j.apsusc.2025.16493010.1016/j.apsusc.2025.164930 ↗
12. 10.1149/1.186998410.1149/1.1869984 ↗
13. 10.1016/j.corsci.2021.10935410.1016/j.corsci.2021.109354 ↗
14. Zhang G Gu J Shi H et al. Microstructures and mechanical properties analysis of TiAl joints using novel brazing filler metal Welding in the World. 2025.10.1007/s40194-025-02210-3 ↗
15. 10.1016/j.corsci.2017.05.00710.1016/j.corsci.2017.05.007 ↗
16. 10.1016/j.matchar.2022.11247610.1016/j.matchar.2022.112476 ↗
17. 10.1016/j.jmrt.2023.10.00910.1016/j.jmrt.2023.10.009 ↗
18. 10.1016/j.matchar.2025.11588410.1016/j.matchar.2025.115884 ↗
19. 10.1016/j.matchar.2022.11197410.1016/j.matchar.2022.111974 ↗
20. 10.1016/j.jmrt.2023.01.17410.1016/j.jmrt.2023.01.174 ↗
21. 10.1016/j.jmapro.2020.09.02510.1016/j.jmapro.2020.09.025 ↗
22. 10.1016/j.jmrt.2022.08.09410.1016/j.jmrt.2022.08.094 ↗
23. 10.1016/j.optlastec.2022.10887610.1016/j.optlastec.2022.108876 ↗
24. 10.1016/j.jmapro.2022.03.04610.1016/j.jmapro.2022.03.046 ↗
25. 10.1007/s10845-022-02058-010.1007/s10845-022-02058-0 ↗
26. 10.1016/j.actamat.2016.06.03610.1016/j.actamat.2016.06.036 ↗
27. 10.1007/s12598-025-03504-710.1007/s12598-025-03504-7 ↗
28. 10.1007/978-3-030-89101-5_410.1007/978-3-030-89101-5_4 ↗
29. 10.1016/j.electacta.2021.13791010.1016/j.electacta.2021.137910 ↗
30. 10.1016/j.jmrt.2023.08.22810.1016/j.jmrt.2023.08.228 ↗
31. 10.1016/j.calphad.2007.10.00110.1016/j.calphad.2007.10.001 ↗
32. 10.1016/j.jmst.2022.12.03010.1016/j.jmst.2022.12.030 ↗
33. 10.1007/s40194-025-01950-610.1007/s40194-025-01950-6 ↗
34. Tate SB, Javernick DA, Lienert TJ, et al. Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part I-Impurity effects and solidifcation mode. Welding Journal 2016; 95: 371s–383s.
35. Tate SB, Javernick DA, Lienert TJ, et al. Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part II-Weldability diagrams. Welding Journal 2016; 95: 409s–418s.
36. 10.1016/j.actamat.2015.01.03410.1016/j.actamat.2015.01.034 ↗
37. 10.1080/13621718.2019.168116010.1080/13621718.2019.1681160 ↗
38. 10.1080/13621718.2020.180289710.1080/13621718.2020.1802897 ↗
39. Kou S, Le Y. Nucleation mechanisms and grain refining of weld metal. Welding Journal 1986; 65: 305s–313s.
40. 10.1016/j.actamat.2016.09.03710.1016/j.actamat.2016.09.037 ↗
41. 10.1016/j.jmrt.2021.11.06310.1016/j.jmrt.2021.11.063 ↗
42. 10.1007/BF0267033810.1007/BF02670338 ↗
43. 10.2320/matertrans.46.89510.2320/matertrans.46.895 ↗
44. Brody HD, Flemings MC. Solute redistribution in dendritic solidification. Materials Transactions 1966; 236: 615–623.
45. Flemings MC, Kattamis TZ, Barbara B. Dendrite arm spacing in aluminum alloys. AFS Transactions 1991; 99: 501–506.
46. 10.1016/0956-7151(94)00448-Q10.1016/0956-7151(94)00448-Q ↗
47. 10.1007/s11665-012-0207-210.1007/s11665-012-0207-2 ↗
48. 10.1007/s11665-999-0002-x10.1007/s11665-999-0002-x ↗
49. 10.1016/j.jmrt.2025.04.29310.1016/j.jmrt.2025.04.293 ↗
50. 10.1016/j.jajp.2024.10023710.1016/j.jajp.2024.100237 ↗
51. 10.1007/s11661-024-07460-210.1007/s11661-024-07460-2 ↗