Microstructure and tribological properties in Al–Si–Cu alloy friction-surfaced coatings processed by submerged fast multiple-rotation rolling
Source abstract
Abstract
Al–Si–Cu alloy coatings were deposited on AA1010 aluminum by friction surfacing and post-treated using submerged fast multiple-rotation rolling (FMRR). The effect of tool rotational speed (200–1100 rpm) on microstructure and tribological behavior was systematically evaluated. Increasing rotational speed raised interface temperature from 372 to 425 °C, reduced coating thickness from 2.21 ± 0.04 to 1.61 ± 0.02 mm, and increased the thickness of the refined surface layer from 53.8 ± 1.1 to 98.3 ± 1.2 µm. Optimal refinement occurred at 800 rpm, producing fine equiaxed grains (3.74 ± 0.11 µm), uniformly distributed Al 2 Cu precipitates, and fragmented silicon particles. This condition yielded the highest nano-hardness (5.56 ± 0.12 GPa) and reduced wear rate by 52% and 79% compared to the consumable rod and AA1010 substrate, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Northern Border University
Higher Technological Institute
References (44)
Show source-provided references
1. 10.3390/ma1608297210.3390/ma16082972 ↗
2. 10.1016/j.jmapro.2025.08.07810.1016/j.jmapro.2025.08.078 ↗
3. 10.36922/MSAM02528006010.36922/MSAM025280060 ↗
4. 10.3390/cryst1501003510.3390/cryst15010035 ↗
5. 10.1021/acs.langmuir.5c0300710.1021/acs.langmuir.5c03007 ↗
6. 10.26599/FRICT.2025.944100710.26599/FRICT.2025.9441007 ↗
7. 10.1177/0267083625133181710.1177/02670836251331817 ↗
8. 10.1177/0267083624128336910.1177/02670836241283369 ↗
9. 10.1177/0267083624126726510.1177/02670836241267265 ↗
10. 10.1177/0267083625136383210.1177/02670836251363832 ↗
11. 10.1016/j.apsusc.2025.16493010.1016/j.apsusc.2025.164930 ↗
12. Cheng X, Hu J, Wan A, et al. Optimizing Inconel 718 micro-hole drilling using response surface and random forest methods. Measurement (Mahwah N J) 2025; 262: 120032.
13. 10.1016/j.optlastec.2022.10844210.1016/j.optlastec.2022.108442 ↗
14. 10.1016/j.jmrt.2022.09.03210.1016/j.jmrt.2022.09.032 ↗
15. 10.1016/j.matchemphys.2025.13141410.1016/j.matchemphys.2025.131414 ↗
16. Zhang G, Gu J, Shi H, et al. Microstructures and mechanical properties analysis of TiAl joints using novel brazing filler metal. Weld World 2025: 1–15. DOI: 10.1007/s40194-025-02210-3
17. 10.1016/j.addma.2024.10426110.1016/j.addma.2024.104261 ↗
18. 10.1016/j.cossms.2025.10123810.1016/j.cossms.2025.101238 ↗
19. 10.1016/j.compositesb.2025.11278610.1016/j.compositesb.2025.112786 ↗
20. Peng J, Xie S, Xia J, et al. Investigation of process and properties of Cu-Mn-Al alloy cladding deposited on 27SiMn steel via cold metal transfer. Crystals (Basel) 2025; 15: 58.
21. 10.1007/s11663-024-03370-110.1007/s11663-024-03370-1 ↗
22. 10.1016/j.jmst.2024.11.07910.1016/j.jmst.2024.11.079 ↗
23. 10.1016/j.msea.2024.14662010.1016/j.msea.2024.146620 ↗
24. 10.1016/j.jma.2025.04.02510.1016/j.jma.2025.04.025 ↗
25. 10.1177/0267084424129313910.1177/02670844241293139 ↗
26. 10.3390/ma1707161810.3390/ma17071618 ↗
27. 10.1016/j.jmatprotec.2017.07.03310.1016/j.jmatprotec.2017.07.033 ↗
28. 10.1016/j.apsusc.2012.09.07910.1016/j.apsusc.2012.09.079 ↗
29. 10.1016/j.matdes.2011.10.04210.1016/j.matdes.2011.10.042 ↗
30. 10.1016/j.jmrt.2024.09.11910.1016/j.jmrt.2024.09.119 ↗
31. Elamy MI, Elmahdy M. Enhancing Al-Si-Cu friction-surfaced coatings via fast rotational rolling process. Can Metall Q 2025: 1–14. DOI: https://doi.org/10.1080/00084433.2025.260572410.1080/00084433.2025.2605724 ↗
32. 10.1016/j.apsusc.2011.02.12710.1016/j.apsusc.2011.02.127 ↗
33. 10.1016/j.vacuum.2013.07.02810.1016/j.vacuum.2013.07.028 ↗
34. 10.1007/s12598-025-03504-710.1007/s12598-025-03504-7 ↗
35. 10.1016/j.jmatprotec.2013.12.00810.1016/j.jmatprotec.2013.12.008 ↗
36. 10.1021/am301459q10.1021/am301459q ↗
37. 10.1177/1045389X25135280610.1177/1045389X251352806 ↗
38. 10.1016/j.jmrt.2025.03.26410.1016/j.jmrt.2025.03.264 ↗
39. 10.1016/j.jmst.2025.09.05910.1016/j.jmst.2025.09.059 ↗
40. 10.1016/j.corsci.2025.11322110.1016/j.corsci.2025.113221 ↗
41. 10.1016/j.intermet.2025.10902210.1016/j.intermet.2025.109022 ↗
42. 10.1007/s12598-025-03543-010.1007/s12598-025-03543-0 ↗
43. 10.1016/j.ijsolstr.2025.11328510.1016/j.ijsolstr.2025.113285 ↗
44. 10.1016/j.matchar.2025.11588410.1016/j.matchar.2025.115884 ↗