journal article·2026-01-30Open access

Effects of Cu, Re, and Mo ternary additions on the tribological and electrochemical properties of NiTi-based alloys fabricated by mechanical alloying and spark plasma sintering

Boingotlo I Setlhabi, Uwa O Uyor, Abimbola P Popoola, Olawale M Popoola, Chika O Ujah

Abstract

The toxicity of Ni 2+ ions has been the bane of NiTi shape memory alloy (SMA) in various applications, such as biomedical. However, the formation of TiO 2 film, which doubles as a resistance to corrosion and wear in frictional applications, has been reported as unstable when exposed for a long period, further causing the mobility of Ni 2+ to the surface. Therefore, this study investigated the enhancement in corrosion and tribological resistance of NiTi-based ternary alloys incorporated with two of the Cu, Re, and Mo for a given sample. The NiTi-based ternary alloys were fabricated via spark plasma sintering (SPS). The microstructure and crystal phases of the sintered sample were investigated using a scanning electron microscope and X-ray diffractometer, respectively. Their electrochemical responses in H 2 SO 4 and NaCl solutions and their tribological features were determined, which showed different enhancement levels compared to the NiTi alloy. For the tribological properties, a combination of NiTi-0.5Re-0.8Mo gave the best wear resistance with a wear rate of about 1.219 × 10 −7 mm 3 /N·m at 15N. The electrochemical test also revealed that the NiTi-Re-Mo ternary alloy group has the lowest corrosion rate, which can be attributed good chemical resistance of the combined Re and Mo that aided in TiO 2 film stability in both acidic and saline environments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Ferroelectric and Piezoelectric Materials · Musicians’ Health and Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Tshwane University of Technology

References (44)

Show source-provided references
1. 10.1016/j.surfcoat.2005.04.03410.1016/j.surfcoat.2005.04.034 ↗
2. 10.1140/epjp/i2017-11461-510.1140/epjp/i2017-11461-5 ↗
3. 10.1590/1516-1439.02241510.1590/1516-1439.022415 ↗
4. 10.1007/s10853-023-08764-110.1007/s10853-023-08764-1 ↗
5. 10.4028/www.scientific.net/SSP.203-204.33510.4028/www.scientific.net/SSP.203-204.335 ↗
6. Zhu L Trepanier C Pelton A et al. Oxidation of nitinol and its effect on corrosion resistance. In: Proceedings of the ASM Materials & Processes for Medical Device Conference 2004. pp 156-161.
7. 10.1557/JMR.2010.005110.1557/JMR.2010.0051 ↗
8. 10.3390/met1401008810.3390/met14010088 ↗
9. 10.1016/j.matpr.2020.12.72310.1016/j.matpr.2020.12.723 ↗
10. 10.2319/042909-235.110.2319/042909-235.1 ↗
11. 10.1016/j.intermet.2024.10827110.1016/j.intermet.2024.108271 ↗
12. 10.15251/DJNB.2021.164.150110.15251/DJNB.2021.164.1501 ↗
13. 10.1016/j.jmbbm.2012.04.00410.1016/j.jmbbm.2012.04.004 ↗
14. 10.1016/j.matdes.2013.03.09910.1016/j.matdes.2013.03.099 ↗
15. 10.1016/j.msea.2007.02.15110.1016/j.msea.2007.02.151 ↗
16. 10.1016/S1452-3981(23)13909-510.1016/S1452-3981(23)13909-5 ↗
17. 10.1016/j.commatsci.2015.10.02910.1016/j.commatsci.2015.10.029 ↗
18. Shi Z, Wang Z, Qiao Y, et al. Ultrasonic cavitation erosion-corrosion behavior of NiTi claddings with Ni and Cu interlayer. Surf Rev Lett 2022; 32: 2240002.
19. 10.1007/s11665-020-04901-y10.1007/s11665-020-04901-y ↗
20. 10.1007/s40830-023-00450-010.1007/s40830-023-00450-0 ↗
21. 10.1007/s43452-024-00901-010.1007/s43452-024-00901-0 ↗
22. Cai S, Schaffer J, Ren Y. Effect of Mo on phase transformations and mechanical properties of NiTi alloys. Shape Memory and Superelasticity 2023: 1–8.
23. 10.1016/j.mfglet.2022.08.01010.1016/j.mfglet.2022.08.010 ↗
24. 10.1016/j.carbon.2021.04.03410.1016/j.carbon.2021.04.034 ↗
25. 10.3390/ma1407166010.3390/ma14071660 ↗
26. 10.1007/s12034-008-0001-910.1007/s12034-008-0001-9 ↗
27. Alhumdany A Abidali A Abdulredha H. Investigation of wear behaviour for NiTi alloys with yttrium and tantalum additions. In: IOP Conference Series: Materials Science and Engineering 2018. vol 1. IOP Publishing p 012072.10.1088/1757-899X/433/1/012072 ↗
28. 10.1016/j.matlet.2014.10.11610.1016/j.matlet.2014.10.116 ↗
29. 10.1016/j.msec.2016.11.02210.1016/j.msec.2016.11.022 ↗
30. 10.3390/met1112190010.3390/met11121900 ↗
31. 10.1016/j.rinp.2019.10246510.1016/j.rinp.2019.102465 ↗
32. 10.1016/j.matdes.2017.07.02410.1016/j.matdes.2017.07.024 ↗
33. 10.1007/s11665-015-1462-910.1007/s11665-015-1462-9 ↗
34. 10.3390/ma1009104710.3390/ma10091047 ↗
35. 10.1007/s11665-021-05631-510.1007/s11665-021-05631-5 ↗
36. 10.1016/j.corsci.2020.10855710.1016/j.corsci.2020.108557 ↗
37. 10.1016/j.jallcom.2015.06.12910.1016/j.jallcom.2015.06.129 ↗
38. 10.3390/ma1302029210.3390/ma13020292 ↗
39. 10.1016/j.corsci.2009.11.02810.1016/j.corsci.2009.11.028 ↗
40. 10.1016/j.intermet.2006.08.00510.1016/j.intermet.2006.08.005 ↗
41. 10.1016/j.jallcom.2012.09.09110.1016/j.jallcom.2012.09.091 ↗
42. 10.1016/j.ceramint.2022.05.12910.1016/j.ceramint.2022.05.129 ↗
43. 10.1016/j.mtla.2019.10024910.1016/j.mtla.2019.100249 ↗
44. 10.1016/j.tsf.2019.13743410.1016/j.tsf.2019.137434 ↗