Oxidation resistance of Ti 8 Zr 6 Nb 4 V 5 Cr 4 lightweight high-entropy alloys by different trace addition of Al
Source abstract
Abstract
A series of Ti 8 Zr 6 Nb 4 V 5 Cr 4 lightweight high-entropy alloys with different trace addition of Al were prepared, and high temperature oxidation resistance tests for the alloys were tested at 800°C/100 h. Results show that oxidation weight gain of the alloys with trace addition of Al from 0.1at.% to 0.4at.% is decreased from 546.0 mg/cm 2 to 175.3 mg/cm 2 . Moreover, thickness of oxide film for different alloys decreases significantly from 995 µm to 645 µm. Oxides formed on oxidation surface are greatly affected by Al content, and cracks on oxidation surface of the alloy with higher Al content are obviously reduced. Increase of dense TiO 2 , Ti 4 Cr 3 Nb 3 O 2 , CrVNbO 6 , and Al 2 O 3 oxides within the oxide film can effectively prevent further diffusion of oxygen, and therefore significantly improve oxidation resistance of the alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Henan University of Technology
Harbin Institute of Technology
Huazhong University of Science and Technology
Funding
State Key Laboratory of Materials Processing and Die and Mould Technology · National Natural Science Foundation of China · Science and Technology Innovation Talents in Universities of Henan Province
References (30)
Show source-provided references
1. 10.1080/21663831.2014.91269010.1080/21663831.2014.912690 ↗
2. 10.1016/j.msea.2023.14518310.1016/j.msea.2023.145183 ↗
3. 10.1016/j.msea.2023.14546610.1016/j.msea.2023.145466 ↗
4. 10.1038/s41586-018-0685-y10.1038/s41586-018-0685-y ↗
5. 10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
6. 10.1016/j.matchemphys.2022.12583410.1016/j.matchemphys.2022.125834 ↗
7. 10.1016/j.jallcom.2022.16522210.1016/j.jallcom.2022.165222 ↗
8. 10.1007/s11433-023-2226-610.1007/s11433-023-2226-6 ↗
9. 10.1016/j.msea.2023.14477910.1016/j.msea.2023.144779 ↗
10. 10.1016/j.matlet.2015.08.09910.1016/j.matlet.2015.08.099 ↗
11. 10.1134/S102995992106002310.1134/S1029959921060023 ↗
12. 10.3389/fmats.2020.0017210.3389/fmats.2020.00172 ↗
13. Liu Q, Lu Y, Zhang Y, et al. Al19.3Co15Cr15Ni50.7 thermal deformation behavior of high entropy alloy[J]. Acta Metall SINica 2021; 57: 1299–1308.
14. 10.1007/s12613-020-2040-110.1007/s12613-020-2040-1 ↗
15. 10.1016/j.msea.2023.14462810.1016/j.msea.2023.144628 ↗
16. 10.1007/s42243-024-01280-910.1007/s42243-024-01280-9 ↗
17. 10.1007/s10853-012-6582-010.1007/s10853-012-6582-0 ↗
18. 10.1016/j.jallcom.2013.08.10210.1016/j.jallcom.2013.08.102 ↗
19. 10.1016/j.jallcom.2016.02.25710.1016/j.jallcom.2016.02.257 ↗
20. Wang Y, Liu H, Dong Y, et al. High-Temperature oxidation behavior of AlCoCrCuFeNi high-entropy alloys prepared by selective Laser melting[J]. Rare Met Mater Eng 2023; 52: 2154–2160.
21. Liu Y, Zhu J, Zhao X, et al. Oxidation behaviors of FeCrNiAl high entropy alloy and its microstructure evolution[J]. Rare Met Mater Eng 2018; 47: 2743–2748.
22. 10.1007/s11085-008-9117-y10.1007/s11085-008-9117-y ↗
23. 10.3390/ma1112252610.3390/ma11122526 ↗
24. 10.1016/j.corsci.2019.10816110.1016/j.corsci.2019.108161 ↗
25. 10.1038/s41598-019-43819-x10.1038/s41598-019-43819-x ↗
26. 10.1002/adem.20200104710.1002/adem.202001047 ↗
27. 10.1016/j.intermet.2018.10.00410.1016/j.intermet.2018.10.004 ↗
28. 10.1557/jmr.2018.24110.1557/jmr.2018.241 ↗
29. 10.1016/j.intermet.2018.05.01510.1016/j.intermet.2018.05.015 ↗
30. 10.1016/j.ijrmhm.2022.10581210.1016/j.ijrmhm.2022.105812 ↗