journal article·2026-02

Methodological aspects of studying the anodic oxidation influence on the composition, structure, and properties of aluminum- and titanium-based alloys

Andrey Dolgov, Galina Kuz’micheva, Andrey Dorokhov, Ivan Pavlov, Elena Domoroshchina

Materials Science and Technology· Volume 42· Issue 3
Publisher page

Abstract

Industrial aluminum (AMg5, D16) and titanium (OT4-1) alloys with high corrosion resistance, ductility, and machinability were comprehensively characterized. The compositions of the initial and anodized alloys and main phase were estimated (deviation from 1% (AMg5) to 6.5% (OT4-1)). ∼2% of an unknown impurity phase in initial and anodized AMg5 and amorphous oxygen-containing aluminum phases (anodized AMg5, D16) were detected. The elemental composition deviations from the regulatory documents were established (up to 4.51% for Mg content, 2.77% for Cu, 4.69% for O in AMg5, D16, OT4-1, respectively). An explanation for the increase in the microhardness of anodized alloys compared to the initial ones by 19.3% (AMg5), 25.8% (D16), 4.9% (OT4-1) was proposed. The obtained results allow establishing “composition—structure—property” relationship.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Material Properties and Applications · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

MIREA - Russian Technological University

Funding

Ministry of Science and Higher Education of the Russian Federation

References (41)

Show source-provided references
1. Nakashima P. Encyclopedia of aluminum and its alloys, two-volume set (Print). 1st ed. Boca Raton, FL, USA: CRC Press, 2019, pp.488–586.
2. Fridlyander IN. High-strength deformable aluminum alloys. Moscow: Oborongiz, 1960, 288 p. (RU).
3. 10.1002/352760211910.1002/3527602119 ↗
4. Kishawy HA Hosseini A. Titanium and titanium alloy. In: Machining difficult-to-cut materials. New York USA: Springer 2019 pp.55–96.10.1007/978-3-319-95966-5_3 ↗
5. Rangappa SM, Doddamani SM, Doddamani M, et al. Lightweight and sustainable materials - a global scenario. In: Lightweight and sustainable composite materials preparation, properties and applications. 1st ed. Amsterdam, Netherlands: Elsevier, 2023, pp.1–18.
6. 10.18577/2307-6046-2018-0-7-96-10510.18577/2307-6046-2018-0-7-96-105 ↗
7. 10.5006/1.362216310.5006/1.3622163 ↗
8. Rosenfeld IL. Corrosion and protection of metals. Moscow: Metallurgy, 1969, 448 p.
9. ASTM G0078-01. Guide for Crevice Corrosion Testing of Iron- and Nickel-Based Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments ASTM USA 2001 7 p.
10. Antipov VV. Prospects for development of aluminium, magnesium and titanium alloys for aerospace engineering. Aviat Mater Technol 2017; 5: 186–194.
11. Shemetev GF. Aluminum alloys: compositions, properties, application: textbook. St. Petersburg: SPbPU, 2012, 155 p. (RU).
12. Beletsky VM, Krivov GA. Aluminum alloys. Composition, properties, technology, application: Handbook. 1st ed. Kyiv: KOMINTEKH, 2005, 365 p.
13. Illarionov AG, Popov AA. Technological and operational properties of titanium alloys: textbook. Ekaterinburg: Publishing house of the Ural University, 2014, 137 p.
14. Central metal portal URL: https://metallicheckiy-portal.ru/ (Accepted 17 June 2025)
15. Pesin AM, Pustovoitov DO, Pivovarova KG. Phase transformations in aluminum alloy of the Al-Cu-Mg system under intense plastic deformation. Theory Technol Metall Prod 2022; 1: 25–29.
16. 10.17212/1994-6309-2020-22.4-124-13610.17212/1994-6309-2020-22.4-124-136 ↗
17. 10.21122/1683-6065-2022-2-78-8310.21122/1683-6065-2022-2-78-83 ↗
18. Mola R, Dziadoń A. Formation of magnesium-eutectic mixture layered composite. Arch Foundry Eng 2008; 8: 127–132. http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-article-BPZ3-0046-0024
19. Avekr'yanov EE. Handbook of anodizing. Moscow: Mechanical engineering, 1988, p. 224. (RU).
20. 10.1149/2.1081607jes10.1149/2.1081607jes ↗
21. 10.1016/j.jelechem.2019.05.03410.1016/j.jelechem.2019.05.034 ↗
22. 10.1149/2.1361809jes10.1149/2.1361809jes ↗
23. 10.1016/j.electacta.2013.09.00410.1016/j.electacta.2013.09.004 ↗
24. Svetogorov RD. Diana – Diffraction Analyzer Certificate for computer program No. 2018661057 (registered 31 August 2018).
25. MMCSoft Software for Microscopy Machine Vision Image Analysis Systems URL: https://mmcatalog.com (Accepted 17 June 2025)
26. 10.1021/jacs.9b0901610.1021/jacs.9b09016 ↗
27. 10.1007/BF0134968010.1007/BF01349680 ↗
28. 10.15282/ijame.19.2.2022.09.075110.15282/ijame.19.2.2022.09.0751 ↗
29. Kuz’micheva GM. Theory of the densest spherical packings and dense spherical masonry. Moscow: MITHT, 2000, 36 p. Урусов В. С. Теоретическая кристаллохимия. М.: Изд-во МГУ. 1987. 275 с. (RU).
30. Urusov VS. Theoretical crystal chemistry. Moscow: Moscow State University Publishing House, 1987, 275 p.
31. Duyunova VA, Kozlov IA, Oglodkov MS, et al. Modern trends in the anodic oxidation of aluminum-lithium and aluminum alloys (review). Sci Tech J “Proc VIAM” 2019; 8: 79–89.
32. 10.1063/1.172569710.1063/1.1725697 ↗
33. Mishenina LN, Shelkovnikov VV. Reference materials on chemistry: textbook. 2nd ed. Tomsk: Publishing house of Tomsk University, 2007, 89 p.
34. 10.1016/j.jallcom.2020.15853310.1016/j.jallcom.2020.158533 ↗
35. Kolenchin NF. Scientific notes. Electron Sci J Kursk State Univ 2012; 1: 80–86. RU.
36. Guidelines 5.95066-90 Thermal oxidation (antifriction and protective) of parts made of PT-3V alloys. Standard technological process 1999 52 p. (RU)
37. 10.20964/2018.02.7810.20964/2018.02.78 ↗
38. Başyiğit AB, Kurt Hİ. Hard anodic oxidation of A356 aluminum alloy. Int J Mater Eng Technol 2021; 4: 44–50.
39. 10.1016/0022-3697(61)90138-X10.1016/0022-3697(61)90138-X ↗
40. 10.1088/0370-1301/64/9/30310.1088/0370-1301/64/9/303 ↗
41. Petch NJ. The cleavage strength of polycrystals. J Iron Steel Inst 1953; 174: 25–28.