journal article·2026-01

Microstructure characterization of streaky defects on hot dip galvannealed IF steel

GuiBin Cui, XinHua Ju, Yang Meng, Qun Ren

Materials Science and Technology· Volume 42· Issue 1
Publisher page

Abstract

Streaky mark defects on hot dip galvannealed Ti-IF sheets were analyzed using SEM, EBSD, FIB, and TEM. Results revealed that bright streak had slightly larger skin-passed area in correspondence to more uniform GA coating. After the removal of GA coating, more coarse grains on the substrate surface, primarily elongated grains along the rolling direction with the normal direction//<100>, were found in the bright streak area. These coarse grains accelerate the Fe-Zn diffusion reaction during galvannealing and result in a flatter coating surface and an even coating thickness. The source of these coarse grains at the uppermost surface could be traced back to the hot rolling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Institute of Technology of Shougang Group Co., Ltd.

Beijing Key Laboratory of Green Recyclable Process for Iron & Steel Production, Beijing, China

References (17)

Show source-provided references
1. Zhang LY, Li J, Zuo L. Current process and technology investigation situation in the field of steel strip continuous hot-dip galvanization. Steel Rolling 2005; 22: 38–43.
2. Li JL. Current situation of wide strip hot-dip galvanizing and its market prospect in China. Steel Rolling 2004; 21: 1–3.
3. Song J. Production and technology development of hot-dipped galvanized sheet steel. Steel Rolling 2006; 23: 42–46.
4. Xu XQ, Wang SX. Development and prospect of continuous hot-dip galvanized process. Surf Technol 2007; 36: 71–74.
5. Jiang P. Disscusion on development of galvanized strip for automobile in China. Iron Steel 1996; 31: 73–77.
6. Zhang QF, Liu BJ. Recent development in study of effect of coating phase structure of IF galvannealed steel sheet on its properties. Iron Steel 2002; 37: 65–68.
7. Yang ZR, Cheng J, Zhao ZY. Development and use of zinc-iron alloy coated steel sheets. Iron Steel 1983; 18: 31–38.
8. Liu JL, Qian H, Li J. Study on phase structure of galvanized steel. Surf Technol 2005; 34: 41–42, +61.
9. 10.1016/j.engfailanal.2009.04.00610.1016/j.engfailanal.2009.04.006 ↗
10. Jiang GS, Liu SX, Ge ZY. Causes analysis of strip defects on the surface of galvannealed sheets. Steel Rolling 2022; 39: 126–131.
11. Jin XY, Qian HW, Lin CH. Investigation on the transformation of sink roll groove mark defect in the galvannealing process. Baosteel Technol 2017; 6: 7–13.
12. Jin XY, Chen JJ, Lin CH. Study on the transformation of bottom dross during the galvannealing process. Baosteel Technol 2019; 5: 1–9.
13. 10.1016/j.surfcoat.2022.12816210.1016/j.surfcoat.2022.128162 ↗
14. Zhong WM, Dziuba R. Formation of GA streaky defects simulated by using lab hot dip simulator. In: International Conference on Zinc & Zinc Alloy Coated Steel Sheet, 2015, pp.642–649.
15. 10.1007/s11661-997-0025-610.1007/s11661-997-0025-6 ↗
16. Jin XY, Wang L, Liu X. Investigation of streaky mark defect on hot dip galvannealed IF steel. Corros Sci Technol 2010; 9: 109–115.
17. Frank F, Olaf M, Wihelm W. Influence of microstructure on the perfomance of galvannealed coatings. In: Galvanised steel sheet forum: Automotive, 2000, pp.89–101.