journal article·2025-09-22

Constitutive analysis, processing map, and dynamic recrystallization behavior of Al 0.6 CoCrFeNi high entropy alloy using hot compression tests

Kwang-Tae Son, Hyoseo Lee, Chulwoong Han, DongEung Kim, Hyoseop Kim, Myoung-Gyun Kim, Soon-Jik Hong, Ji-Woon Lee

Publisher page

Abstract

To evaluate the hot deformation behavior of Al 0.6 CoCrFeNi high entropy alloy, the elevated temperature compression tests were performed. The flow stress decreased as the temperature increased and the strain rate decreased. The shape of the flow curves exhibits that the alloy was undergone the dynamic restoration behavior. The constitutive relationships and processing maps were established, and the optimal hot working condition of 950 °C and 10 s −1 was confirmed through the correlation of temperature-strain rate-strain rate. Deformed microstructure through EBSD analysis revealed that the discontinuous dynamic recrystallization acts as the main dynamic restoration mechanism of the alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical, Industrial, and Manufacturing Engineering, Oregon State University, Corvallis, USA

IP Management Team2, IP Group, LG Energy Solutions, Daejon, South Korea

Research Institute of Intelligent Manufacturing & Materials Technology, Korea Institute of Industrial Technology, Incheon, South Korea

Light Materials Research Cell, Research Institute of Industrial Science and Technology (RIST), Pohang, South Korea

Division of Advanced Materials Engineering, Kongju National University, Cheonan, South Korea

Center for Advanced Materials and Parts of Powder, Kongju National University, Cheonan, South Korea

Funding

Kongju National University · National Research Foundation of Korea · Ministry of Trade, Industry & Energy

References (25)

Show source-provided references
1. Tsai MH, Yeh JW. High-entropy alloys: a critical review. Mat Res Lett 2014; 2: 07.
2. Yeh JW. Recent progress in high-entropy alloys. Eur J Control 2006; 31: 633.
3. 10.1016/j.jallcom.2009.08.09010.1016/j.jallcom.2009.08.090 ↗
4. 10.1038/srep4274210.1038/srep42742 ↗
5. 10.1007/s10853-012-6253-110.1007/s10853-012-6253-1 ↗
6. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
7. 10.1016/j.msea.2013.01.08010.1016/j.msea.2013.01.080 ↗
8. 10.1016/j.matchar.2012.10.00710.1016/j.matchar.2012.10.007 ↗
9. Gavgali M, Aksakal B. Effects of various homogenization treatments on the hot workability of ingot aluminum alloy AA2014. Mater Sci Eng A 2002; 254: 15.
10. 10.1007/BF0264776510.1007/BF02647765 ↗
11. Prasad YVRK, Sasidhara S. Hot working guide: a compendium on processing maps. Novelty, OH: ASM International, 1997, 1.
12. 10.1007/s12540-015-4485-810.1007/s12540-015-4485-8 ↗
13. Kil TD, Han SW, Moon YH. Studies on quantitative estimation of hot forgeability by using deformation processing map. Korean J Met Mater 2014; 52: 31.
14. Gong M, Bolong L, Hongmei L, et al. Hot deformation and processing maps of an Al–5.7 wt.% Mg alloy with erbium. Mater Sci Eng A 2009; 517: 32.
15. 10.1016/j.msea.2017.03.05810.1016/j.msea.2017.03.058 ↗
16. 10.1007/BF0267076310.1007/BF02670763 ↗
17. 10.1016/B978-008044164-1/50017-710.1016/B978-008044164-1/50017-7 ↗
18. 10.1016/0921-5093(94)91028-610.1016/0921-5093(94)91028-6 ↗
19. 10.1016/S0921-5093(00)00933-310.1016/S0921-5093(00)00933-3 ↗
20. 10.1016/0001-6160(84)90049-X10.1016/0001-6160(84)90049-X ↗
21. 10.1007/BF0266342510.1007/BF02663425 ↗
22. 10.1016/0921-5093(94)09714-310.1016/0921-5093(94)09714-3 ↗
23. 10.1179/02670830322500871610.1179/026708303225008716 ↗
24. 10.1016/j.msea.2016.07.10010.1016/j.msea.2016.07.100 ↗
25. Verlinden B, Driver J, Samajdar I, et al. Thermo-mechanical processing of metallic materials. Amsterdam/Netherlands: Elsevier, 2007, 83.