journal article·2025-09-17

Microstructure, hardness, tensile, and wear properties of Cu/Al-Al 2 O 3 laminar composites prepared by gas pressure infiltration casting and roll bonding processes

Lu Zhu, Pedram Zare, Taha Jalili, Rasoul Hamidi

Publisher page

Abstract

Owing to specific properties and applications of metal-ceramic composites, they are nowadays being produced by various processes. Here, gas pressure infiltration casting and cold roll bonding were used to produce Cu/Al-Al 2 O 3 /Cu with different volume fractions of Al 2 O 3 whiskers. The findings showed flawless interfaces of Cu/Al-Al 2 O 3 , indicating good interfacial bonding. Also, based on optical microscopy (OM) and scanning electron microscopy (SEM) results, the median size of grains in cast Al-Al 2 O 3 decreased as the volume fraction of cast composite increased. Similarly, the median size of Cu grains decreased from 10.2 µm in Cu/Al-Al 2 O 3 (5% vol)/Cu to 8.7 µm in Cu/Al-Al 2 O 3 (25% vol)/Cu. On the contrary, the strength and hardness results showed a growth as whiskers increased. The hardness increased from 122 HV and 58 HV on Cu and Al-Al 2 O 3 (5% vol) layers of Cu/Al-Al 2 O 3 (5% vol)/Cu to 134 HV and 72 HV on Cu and Al-Al 2 O 3 (25% vol) of Cu/Al- Al 2 O 3 (25% vol). Also, the mass loss and wear rate of Cu/ Al-Al 2 O 3 /Cu composites decreased as more whiskers were used. The worn surfaces on composites showed different amounts of grooves and debris which were decreased as whiskers increased.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei United Investment Group Co., Ltd, Wuhan, China

Wuhan East Lake of HiTech Group Co., Ltd, Wuhan, China

Beihang University, Beijing, China

Department of Mechanical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

References (90)

Show source-provided references
1. 10.1016/j.electacta.2025.14583110.1016/j.electacta.2025.145831 ↗
2. 10.1039/D1NJ01159F10.1039/D1NJ01159F ↗
3. 10.1021/acsphotonics.5c0036510.1021/acsphotonics.5c00365 ↗
4. 10.1109/REEPE63962.2025.1097104110.1109/REEPE63962.2025.10971041 ↗
5. 10.1016/j.powtec.2023.11824210.1016/j.powtec.2023.118242 ↗
6. Basov BA, Makarova KT, Moiseev KM, et al. Investigation of the plasma polarization parameters effect on the polyvinylidene fluoride film piezoelectric properties used for flexible nanogenerators. In: 2025 7th international youth conference on radio electronics, electrical and power engineering (REEPE), April 2025. IEEE.
7. Okunev VS. Fuel materials for next generation of the liquid metal fast reactor: physics, technology and acceptability. In: 2025 7th international youth conference on radio electronics, electrical and power engineering (REEPE), April 2025, IEEE.
8. Sidorova SV, Khokhlun SA. The properties investigation results of low-temperature co-fired ceramics. In: 2025 7th international youth conference on radio electronics, electrical and power engineering (REEPE), April 2025. IEEE.
9. Ajamieh RH. Gas turbine vibration analysis using polar orbital analysis. In: 2025 7th international youth conference on radio electronics, electrical and power engineering (REEPE), April 2025. IEEE.
10. 10.1109/REEPE63962.2025.1097080810.1109/REEPE63962.2025.10970808 ↗
11. 10.1080/02286203.2025.245998910.1080/02286203.2025.2459989 ↗
12. 10.1016/j.applthermaleng.2025.12712510.1016/j.applthermaleng.2025.127125 ↗
13. 10.1007/s00158-024-03948-y10.1007/s00158-024-03948-y ↗
14. 10.1109/REEPE63962.2025.1097102710.1109/REEPE63962.2025.10971027 ↗
15. 10.1109/REEPE63962.2025.1097100010.1109/REEPE63962.2025.10971000 ↗
16. 10.1109/REEPE63962.2025.1097114710.1109/REEPE63962.2025.10971147 ↗
17. 10.1109/REEPE63962.2025.1097092410.1109/REEPE63962.2025.10970924 ↗
18. 10.1109/REEPE63962.2025.1097100110.1109/REEPE63962.2025.10971001 ↗
19. 10.46770/AS.2024.15810.46770/AS.2024.158 ↗
20. 10.1016/j.applthermaleng.2025.12588910.1016/j.applthermaleng.2025.125889 ↗
21. 10.3390/met1503031410.3390/met15030314 ↗
22. 10.1109/REEPE63962.2025.1097084610.1109/REEPE63962.2025.10970846 ↗
23. 10.1109/REEPE63962.2025.1097093410.1109/REEPE63962.2025.10970934 ↗
24. 10.1109/REEPE63962.2025.1097098210.1109/REEPE63962.2025.10970982 ↗
25. 10.1109/REEPE63962.2025.1097080910.1109/REEPE63962.2025.10970809 ↗
26. 10.1109/REEPE63962.2025.1097101510.1109/REEPE63962.2025.10971015 ↗
27. 10.1109/REEPE63962.2025.1097107910.1109/REEPE63962.2025.10971079 ↗
28. 10.1109/REEPE63962.2025.1097093010.1109/REEPE63962.2025.10970930 ↗
29. 10.1016/j.intermet.2022.10752810.1016/j.intermet.2022.107528 ↗
30. 10.61186/CNJ.2.1.22810.61186/CNJ.2.1.228 ↗
31. 10.1109/REEPE63962.2025.1097083110.1109/REEPE63962.2025.10970831 ↗
32. 10.1109/REEPE63962.2025.1097091310.1109/REEPE63962.2025.10970913 ↗
33. 10.1109/REEPE63962.2025.1097088710.1109/REEPE63962.2025.10970887 ↗
34. 10.1016/j.compositesa.2025.10900910.1016/j.compositesa.2025.109009 ↗
35. 10.1109/REEPE63962.2025.1097079210.1109/REEPE63962.2025.10970792 ↗
36. 10.3390/coatings1505058610.3390/coatings15050586 ↗
37. 10.1016/j.jmrt.2025.03.08910.1016/j.jmrt.2025.03.089 ↗
38. 10.1016/j.jre.2022.05.01810.1016/j.jre.2022.05.018 ↗
39. 10.1016/j.msea.2022.14348510.1016/j.msea.2022.143485 ↗
40. 10.1016/j.jallcom.2022.16799810.1016/j.jallcom.2022.167998 ↗
41. 10.1016/j.optlastec.2022.10844210.1016/j.optlastec.2022.108442 ↗
42. 10.1016/j.jmrt.2024.10.22410.1016/j.jmrt.2024.10.224 ↗
43. 10.1016/j.eswa.2025.12771310.1016/j.eswa.2025.127713 ↗
44. 10.1016/j.isatra.2024.12.04710.1016/j.isatra.2024.12.047 ↗
45. 10.1016/j.addma.2025.10489110.1016/j.addma.2025.104891 ↗
46. 10.1016/j.ijmecsci.2025.11032710.1016/j.ijmecsci.2025.110327 ↗
47. 10.1016/j.ceramint.2003.11.01110.1016/j.ceramint.2003.11.011 ↗
48. 10.1016/j.matdes.2008.11.02710.1016/j.matdes.2008.11.027 ↗
49. Purohit R, Qureshi M, Jain A. Forming behaviour of aluminium matrix nano Al2O3 composites for automotive applications. Adv Mater Process Technol 2020; 6: 272–283.
50. 10.1016/j.matdes.2010.07.01610.1016/j.matdes.2010.07.016 ↗
51. 10.1080/2374068X.2024.237910710.1080/2374068X.2024.2379107 ↗
52. 10.1177/0954406222114546210.1177/09544062221145462 ↗
53. 10.1016/j.matchar.2023.11331510.1016/j.matchar.2023.113315 ↗
54. Chen D, Zhang H, Li H, et al. Study on microstructure and properties of ultra-thin Cu/Al composite sheets using the cold-rolled composite method at the microscale. Metals (Basel) 2023; 13: 80.
55. 10.1016/j.vacuum.2024.11348410.1016/j.vacuum.2024.113484 ↗
56. 10.1016/j.matlet.2024.13683010.1016/j.matlet.2024.136830 ↗
57. 10.3390/met1102027910.3390/met11020279 ↗
58. 10.1016/j.jallcom.2019.05.12910.1016/j.jallcom.2019.05.129 ↗
59. 10.1007/s40962-022-00831-810.1007/s40962-022-00831-8 ↗
60. 10.1016/j.msea.2023.14581610.1016/j.msea.2023.145816 ↗
61. 10.1038/srep0501710.1038/srep05017 ↗
62. 10.1007/s11661-024-07465-x10.1007/s11661-024-07465-x ↗
63. 10.1016/j.ceramint.2019.11.11310.1016/j.ceramint.2019.11.113 ↗
64. 10.2320/matertrans.M201729810.2320/matertrans.M2017298 ↗
65. 10.1007/s11661-009-0138-110.1007/s11661-009-0138-1 ↗
66. 10.1007/s10853-024-09682-610.1007/s10853-024-09682-6 ↗
67. 10.1007/s11665-018-3740-910.1007/s11665-018-3740-9 ↗
68. Huang L, Wang K, Meng W, et al. Study on the wear resistance performance of the hot-rolled BTW1/Q345 composite plate under different annealing temperatures. Crystals (Basel) 2024; 14: 72.
69. 10.1016/j.wear.2022.20448710.1016/j.wear.2022.204487 ↗
70. 10.1016/j.jallcom.2024.17550610.1016/j.jallcom.2024.175506 ↗
71. 10.1016/j.surfcoat.2023.13033010.1016/j.surfcoat.2023.130330 ↗
72. 10.1016/j.triboint.2022.10780310.1016/j.triboint.2022.107803 ↗
73. 10.1002/adfm.v34.3010.1002/adfm.v34.30 ↗
74. 10.1007/s00170-025-15677-710.1007/s00170-025-15677-7 ↗
75. 10.1016/j.matchar.2020.11067410.1016/j.matchar.2020.110674 ↗
76. 10.1016/j.ceramint.2024.08.12110.1016/j.ceramint.2024.08.121 ↗
77. 10.1016/j.ceramint.2024.07.230.10.1016/j.ceramint.2024.07.230. ↗
78. 10.1016/j.matchar.2024.11429910.1016/j.matchar.2024.114299 ↗
79. 10.1016/j.intermet.2025.10892610.1016/j.intermet.2025.108926 ↗
80. 10.1016/j.jmrt.2025.01.01110.1016/j.jmrt.2025.01.011 ↗
81. 10.1016/j.matdes.2025.11423010.1016/j.matdes.2025.114230 ↗
82. 10.1016/j.scriptamat.2025.11676210.1016/j.scriptamat.2025.116762 ↗
83. 10.1016/j.jmrt.2025.04.22610.1016/j.jmrt.2025.04.226 ↗
84. 10.1016/j.engfailanal.2024.10908310.1016/j.engfailanal.2024.109083 ↗
85. 10.1016/j.msea.2024.14642310.1016/j.msea.2024.146423 ↗
86. 10.1016/j.engfailanal.2023.10722810.1016/j.engfailanal.2023.107228 ↗
87. 10.1016/j.jmst.2024.02.01910.1016/j.jmst.2024.02.019 ↗
88. 10.1016/j.msea.2012.01.06910.1016/j.msea.2012.01.069 ↗
89. 10.1016/j.tafmec.2024.10443510.1016/j.tafmec.2024.104435 ↗
90. 10.1007/s12633-023-02419-110.1007/s12633-023-02419-1 ↗