Novel low temperature active soldering of Ti-MAO/substrate (Si wafer and sapphire) with In49Sn0.5Lu active solder in air
Source abstract
Abstract
A micro-porous TiO 2 layer was synthesized on Ti sheet (Ti-MAO) using the micro-arc oxidation (MAO) technique. In this paper, the direct ultrasonic-assisted active soldering technology is applied and its feasibility for the Ti-MAO/substrate (Si wafer, sapphire) bonding is investigated for In49Sn0.5Lu active solder (IS) for 30 s at 150°C in air. The results show that the joints were nearly void-free. the Lu migrated to the solder/substrate interface, reacted with the substrate and formed a thin Lu-rich transition layer. According to thermodynamics calculations, the Gibbs free energy value of LuO 2 is one order of magnitude more negative than the substrate (TiO 2 and sapphire). The shear strength of both Ti-MAO/IS/Si and Ti-MAO/IS/sapphire joint were 3.17 ± 0.57 MPa and 4.87 ± 0.61 MPa, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, National Pingtung University of Science & Technology, Neipu, Pingtung, Taiwan
Funding
National Science and Technology Council, Taiwan · Ministry of Science and Technology, Taiwan
References (52)
Show source-provided references
1. 10.1149/1.238885110.1149/1.2388851 ↗
2. 10.1016/j.scriptamat.2022.11499810.1016/j.scriptamat.2022.114998 ↗
3. 10.1016/j.mee.2011.02.08310.1016/j.mee.2011.02.083 ↗
4. 10.1115/1.403839210.1115/1.4038392 ↗
5. 10.1515/nanoph-2020-004510.1515/nanoph-2020-0045 ↗
6. 10.1080/15599612.2020.185789010.1080/15599612.2020.1857890 ↗
7. 10.1557/s43577-021-00212-210.1557/s43577-021-00212-2 ↗
8. 10.1016/j.msea.2005.09.08410.1016/j.msea.2005.09.084 ↗
9. 10.1007/s00542-021-05228-x10.1007/s00542-021-05228-x ↗
10. 10.1557/JMR.1997.014610.1557/JMR.1997.0146 ↗
11. 10.1016/j.ceramint.2019.07.23910.1016/j.ceramint.2019.07.239 ↗
12. 10.1016/j.msea.2016.01.10010.1016/j.msea.2016.01.100 ↗
13. 10.1007/s10854-006-9114-310.1007/s10854-006-9114-3 ↗
14. 10.1016/j.matdes.2013.11.02110.1016/j.matdes.2013.11.021 ↗
15. 10.1016/j.msea.2012.12.03610.1016/j.msea.2012.12.036 ↗
16. 10.1016/j.elecom.2013.05.03810.1016/j.elecom.2013.05.038 ↗
17. 10.1016/j.electacta.2019.05.11010.1016/j.electacta.2019.05.110 ↗
18. 10.1016/j.cplett.2018.06.06310.1016/j.cplett.2018.06.063 ↗
19. 10.1016/j.ceramint.2021.03.22110.1016/j.ceramint.2021.03.221 ↗
20. 10.1007/s11664-002-0005-y10.1007/s11664-002-0005-y ↗
21. 10.1007/s10854-024-12176-510.1007/s10854-024-12176-5 ↗
22. 10.1038/s41598-018-34635-w10.1038/s41598-018-34635-w ↗
23. 10.3390/met804027410.3390/met8040274 ↗
24. 10.1007/s10854-023-10475-x10.1007/s10854-023-10475-x ↗
25. 10.1108/eb04444710.1108/eb044447 ↗
26. 10.1080/14686996.2020.182425510.1080/14686996.2020.1824255 ↗
27. 10.34133/research.004710.34133/research.0047 ↗
28. Manikkoth ST Panoth D Thulasi KM et al. Ch.7-Flexible smart nanosensors Nanosensors for Smart Manufacturing in Micro and Nano Technologies 1st Ed (2021) 145–182.10.1016/B978-0-12-823358-0.00009-5 ↗
29. 10.1007/s10854-023-11816-610.1007/s10854-023-11816-6 ↗
30. Kwame N, Eason A. The effect of surface conditioning on silicon wafer resistivity monitoring. AIP Conf Proc 2009; 1173: 338–342.
31. 10.1007/s11664-000-0002-y10.1007/s11664-000-0002-y ↗
32. 10.1016/j.msea.2021.14078510.1016/j.msea.2021.140785 ↗
33. 10.1007/s10853-020-04691-710.1007/s10853-020-04691-7 ↗
34. Okamoto H. Comment on Lu-Sn (Lutetium-Tin). J Phase Equilibria 1995; 16: 00.
35. 10.1063/1.143507510.1063/1.1435075 ↗
36. 10.1063/1.137098510.1063/1.1370985 ↗
37. 10.1016/j.ultsonch.2024.10714210.1016/j.ultsonch.2024.107142 ↗
38. 10.1016/j.ceramint.2021.03.22110.1016/j.ceramint.2021.03.221 ↗
39. 10.1016/j.jallcom.2009.04.08010.1016/j.jallcom.2009.04.080 ↗
40. 10.1007/BF0286922310.1007/BF02869223 ↗
41. 10.1007/BF0286855210.1007/BF02868552 ↗
42. massalski TB. Si-In binary alloy phase diagrams, American Society for Metals, Ohio. Metals Park 1986; 2: 1398–1399.
43. 10.1016/j.calphad.2016.05.00210.1016/j.calphad.2016.05.002 ↗
44. Tyvanchuk YB, Zaremba VI, Kalychak YM. Phase equilibria in the Lu-Si-In System at 870K. Polish Pol J Chem 1998; 72: 962–965.
45. Okamoto H. Al-In (aluminum-indium). J Phase Equilib Diff 2012; 33: 13.
46. 10.1007/BF0286809510.1007/BF02868095 ↗
47. Benmechri A, Amer AS. Linking Ab initio-calphad for the assessment of the aluminium-lutetium system. Int Refereed J Eng Sci (IRJES) 2017; 6: 109–111.
48. 10.1016/j.jct.2015.04.00810.1016/j.jct.2015.04.008 ↗
49. 10.2298/JMMB0501113K10.2298/JMMB0501113K ↗
50. 10.5147/ajms.v1i1.11610.5147/ajms.v1i1.116 ↗
51. United States of America- Department of Defense Die shear testing- MIL STD 883E Method 2019.5 1996 Test Method Standard Microcircuits (http://scipp.ucsc.edu/groups/fermi/ electronics/mil-std-883.pdf).
52. 10.1088/1361-6439/ac12a110.1088/1361-6439/ac12a1 ↗