journal article·2026-07Open access

The effect of machining parameters on surface integrity and fatigue performance of 42CrMo4 + QT high-strength steel

Martin Matušů, Jan Papuga, Karel Trojan, Antonín Trefil, Alaitz Zabala, Vladimír Mára, Petr David

Materials Science and Technology· Volume 42· Issue 10

Abstract

This study investigates how machining parameters affect surface integrity and fatigue performance in 42CrMo4 + QT steel. Nine turning setups were tested to evaluate surface roughness, residual stresses, and fatigue strength. Fatigue testing under fully reversed loading (R = –1) at ∼150 Hz revealed that the best fatigue performance occurred in the setup with a cutting speed of 100 m/min, feed rate of 0.1 mm/min, tool nose radius of 0.4 mm, 0.3 mm total finishing depth (over three cuts), and coolant applied. Cutting speed showed the clearest benefit, while other parameters had less predictable effects. Surface roughness did not consistently correlate with fatigue life. Overall, selected machining parameters strongly influence fatigue behavior, though roughness and residual stresses alone do not fully explain the performance trends observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

FME, Czech Technical University in Prague, Technická 4, Prague 6, Czech Republic

Department of Mechanical Engineering and Environmental Technology, OTH Amberg-Weiden, Kaseri-Wilhelm-Ring 23, Amberg 92224, Germany

FNSPE, Czech Technical University in Prague, Trojanova 13, Prague 2, Czech Republic

FME, VŠB – TU Ostrava, 17. Listopadu 15/2172, Ostrava-Poruba, Czech Republic

Mondragon Unibertsitatea

Funding

České Vysoké Učení Technické v Praze · Grantová Agentura České Republiky

References (51)

Show source-provided references
1. 10.1016/j.ijfatigue.2024.10816510.1016/j.ijfatigue.2024.108165 ↗
2. Rennert R. FKM-Richtlinie – Rechnerischer Festigkeitsnachweis für Maschinenbauteile. 6th rev. ed. Frankfurt am Main: VDMA Verlag GmbH, 2012.
3. 10.1016/S0079-6425(97)00016-910.1016/S0079-6425(97)00016-9 ↗
4. 10.1016/j.jmapro.2022.07.04910.1016/j.jmapro.2022.07.049 ↗
5. 10.1016/j.ijfatigue.2010.05.00910.1016/j.ijfatigue.2010.05.009 ↗
6. 10.1016/j.ijfatigue.2006.11.01510.1016/j.ijfatigue.2006.11.015 ↗
7. 10.3221/IGF-ESIS.48.1510.3221/IGF-ESIS.48.15 ↗
8. 10.1007/s00170-006-0429-210.1007/s00170-006-0429-2 ↗
9. 10.1007/s00170-003-1878-510.1007/s00170-003-1878-5 ↗
10. 10.1007/s12289-009-0679-210.1007/s12289-009-0679-2 ↗
11. Eglin steel—a low alloy high strength composition n.d.
12. 10.3389/fmats.2021.79779810.3389/fmats.2021.797798 ↗
13. 10.1016/j.matdes.2011.05.02610.1016/j.matdes.2011.05.026 ↗
14. 10.1016/j.ijfatigue.2024.10857510.1016/j.ijfatigue.2024.108575 ↗
15. 10.1016/j.prostr.2025.06.09210.1016/j.prostr.2025.06.092 ↗
16. Kumar M, Aggarwal A, Khokhar V. Difficulty in welding & effect of pwht on low alloy steel 42CrMo4 (EN19) using smaw process. International Journal of Scientific Development and Research 2024; 9(8): 252–261.
17. 10.3390/coatings1403033710.3390/coatings14030337 ↗
18. Morsy M, El-Kashif E. Repair welding reclamation of 42CrMo4 and C45 steels: Green Welding Technologies for Effective and Reliable Manufacturing. In: Proceedings of IIW 2017 International Conference, Shanghai, China, June, 29-30, 2017. 2017. 1. vyd. Shanghai.
19. 10.1016/j.jmapro.2022.07.07010.1016/j.jmapro.2022.07.070 ↗
20. Asiltürk İ, Akkuş H. Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method. Measurement ( Mahwah N J) 2011; 44(9): 1697–1704. https://doi.org/10.1016/j.measurement.2011.07.003.
21. 10.3390/met1411123810.3390/met14111238 ↗
22. 10.1007/s00170-024-14257-510.1007/s00170-024-14257-5 ↗
23. 10.5755/j01.mech.26.3.2360010.5755/j01.mech.26.3.23600 ↗
24. 10.1016/j.ijrmhm.2009.11.01110.1016/j.ijrmhm.2009.11.011 ↗
25. 10.1016/j.ijrmhm.2012.02.01910.1016/j.ijrmhm.2012.02.019 ↗
26. 10.5755/j01.mech.18.5.270410.5755/j01.mech.18.5.2704 ↗
27. 10.1016/0141-6359(81)90045-310.1016/0141-6359(81)90045-3 ↗
28. 10.1016/j.ijfatigue.2023.10774310.1016/j.ijfatigue.2023.107743 ↗
29. 10.1016/j.prostr.2022.12.01210.1016/j.prostr.2022.12.012 ↗
30. Matušů M, Papuga J. Prediction of fatigue life of 42CrMo4 + QT steel using self-heating effect. 62nd Annual Conference on Experimental Stress Analysis n.d.; 62: 12.
31. FABER (Fatigue Benchmark Repository). 2020. https://www.pragtic.com/faber.php#fabest (accessed 2025-01-30).
32. 10.1016/j.ijfatigue.2006.02.04310.1016/j.ijfatigue.2006.02.043 ↗
33. 10.1111/ffe.1444210.1111/ffe.14442 ↗
34. 10.1016/j.ijfatigue.2017.07.02510.1016/j.ijfatigue.2017.07.025 ↗
35. 10.1016/S0890-6955(99)00011-510.1016/S0890-6955(99)00011-5 ↗
36. 10.1007/s00170-022-10012-w10.1007/s00170-022-10012-w ↗
37. 10.1007/0-387-34403-9_1910.1007/0-387-34403-9_19 ↗
38. 10.5755/j01.mech.25.5.2300510.5755/j01.mech.25.5.23005 ↗
39. E466 − 21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials n.d.
40. ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method 2017.
41. 10.3390/mi1205052610.3390/mi12050526 ↗
42. Čapek J, Kec J, Trojan K, et al. Fatigue Properties and Residual Stresses of Laser-Welded Heat-Resistant Pressure Vessel Steel. Verification on Vessel Model. Metals 2022; 12(9): 1517. https://doi.org/10.3390/met12091517.
43. 10.3390/met1403029010.3390/met14030290 ↗
44. ČSN EN ISO 683-17 Heat-treatable steels alloy steels and free-cutting steels – Part 17: Ball and roller bearing steels 2024.
45. 10.1016/j.ijfatigue.2023.10800610.1016/j.ijfatigue.2023.108006 ↗
46. 10.1016/S0142-1123(00)00082-710.1016/S0142-1123(00)00082-7 ↗
47. 10.1088/1742-6596/2692/1/01203210.1088/1742-6596/2692/1/012032 ↗
48. 10.1080/1040834050052676610.1080/10408340500526766 ↗
49. Kirch W. Pearson’s correlation coefficient. In: Kirch W (eds) Encyclopedia of public health. Dordrecht: Springer Netherlands, 2008, pp.1090–1091. https://doi.org/10.1007/978-1-4020-5614-7_2569.10.1007/978-1-4020-5614-7 ↗
50. 10.1213/ANE.000000000000286410.1213/ANE.0000000000002864 ↗
51. 10.1016/j.tjem.2018.08.00110.1016/j.tjem.2018.08.001 ↗