Optimized AA7075-Al 2 O 3 composites: Leveraging deformation-driven metallurgy for enhanced performance
Source abstract
Abstract
This study investigates the microstructural evolution and mechanical performance of AA7075-Al 2 O 3 composite fabricated via the deformation driven metallurgy at varying rotational speeds (500–1400 rpm). Microstructural analysis revealed uniform equiaxed grain structures across specimens, with grain size increasing from 3.8 µm to 7.6 µm as rotational speed rose. Mechanical testing demonstrated a decline in hardness from 281.6 ± 2.9 HV to 134.1 ± 11.7 HV and in tensile strength from 614.2 MPa to 480.4 ± 12.1 Mpa, attributed to grain growth, precipitate coarsening, and particle clustering. Elongation dropped to a minimum of 9.7 ± 1.1%. Wear resistance also decreased, with wear rates reaching 5.8 ± 0.2 µg/m and friction coefficients peaking at 0.46 ± 0.02 at 1400 rpm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Engineering, Babol Noshirvani University of Technology, Babol, Iran
References (35)
Show source-provided references
1. 10.1038/nmat118010.1038/nmat1180 ↗
2. 10.1080/21663831.2022.202977910.1080/21663831.2022.2029779 ↗
3. 10.1007/s43452-023-00742-310.1007/s43452-023-00742-3 ↗
4. 10.1016/j.msea.2025.14818410.1016/j.msea.2025.148184 ↗
5. 10.1016/j.matlet.2024.13780510.1016/j.matlet.2024.137805 ↗
6. 10.1080/10408436.2022.207827710.1080/10408436.2022.2078277 ↗
7. Huang Y Xie Y Meng X. SiC reinforced aluminum matrix composites via deformation-driven metallurgy friction stir welding and processing Springer 2024 pp. 427–459.10.1007/978-981-99-8688-0_11 ↗
8. 10.1016/j.compositesa.2024.10817410.1016/j.compositesa.2024.108174 ↗
9. 10.1016/j.jmrt.2023.07.14510.1016/j.jmrt.2023.07.145 ↗
10. 10.1016/j.jallcom.2021.16207810.1016/j.jallcom.2021.162078 ↗
11. 10.1007/s40843-022-2271-210.1007/s40843-022-2271-2 ↗
12. 10.1016/j.compositesb.2019.10741310.1016/j.compositesb.2019.107413 ↗
13. 10.1016/j.compscitech.2021.10922510.1016/j.compscitech.2021.109225 ↗
14. 10.1016/j.coco.2021.10077610.1016/j.coco.2021.100776 ↗
15. 10.1016/j.jallcom.2020.15374110.1016/j.jallcom.2020.153741 ↗
16. 10.1016/j.carbon.2022.12.07410.1016/j.carbon.2022.12.074 ↗
17. 10.1016/j.rineng.2023.10137210.1016/j.rineng.2023.101372 ↗
18. 10.3390/lubricants1302009310.3390/lubricants13020093 ↗
19. 10.1177/002199831986530710.1177/0021998319865307 ↗
20. Gotawala N, Shrivastava A. Effect of diffusion on intermetallics at interface during friction stir welding of stainless steel and pure titanium, friction stir welding and processing XI. Cham, Switzerland: Springer, 2021, pp. 135–146.
21. 10.1002/adem.20180010410.1002/adem.201800104 ↗
22. Humphreys FJ Hatherly M. Recrystallization and related annealing phenomena elsevier2012.
23. 10.1021/am301459q10.1021/am301459q ↗
24. 10.1016/j.msea.2014.09.07210.1016/j.msea.2014.09.072 ↗
25. 10.1007/s10853-024-10284-510.1007/s10853-024-10284-5 ↗
26. 10.3390/ma1717423510.3390/ma17174235 ↗
27. 10.1016/j.actamat.2021.11678310.1016/j.actamat.2021.116783 ↗
28. 10.1016/j.engfracmech.2024.11015110.1016/j.engfracmech.2024.110151 ↗
29. 10.1016/j.jmrt.2022.11.13910.1016/j.jmrt.2022.11.139 ↗
30. 10.1016/j.actamat.2023.11911010.1016/j.actamat.2023.119110 ↗
31. 10.1016/j.rineng.2025.10471410.1016/j.rineng.2025.104714 ↗
32. 10.3390/jcs803009710.3390/jcs8030097 ↗
33. 10.1016/j.compositesb.2021.10874610.1016/j.compositesb.2021.108746 ↗
34. 10.3390/cryst1210135710.3390/cryst12101357 ↗
35. 10.1016/j.jallcom.2021.16043010.1016/j.jallcom.2021.160430 ↗