journal article·2025-07-15

Effect of deformation temperature on mechanical properties and microstructure of 7075 aluminum alloys processed by integrated hot forging

Qian Sun, Yi Yang, Guojing Ren, Huijuan Ma, Qubo Long, Jia Zheng, Feng Huang, Zhili Hu

Publisher page

Abstract

Integrated hot forging process (solid solution → forging → aging) of aluminum alloy exhibits a distinct advantage in terms of shortening the processing time and enhancing the mechanical properties. Based on this, solution-hot deformation and then aging experiments, as well as OM, SEM and EBSD tests were carried out to investigate the effect of deformation temperatures (410°C, 440°C, 470°C, 490°C) on the microstructure and mechanical properties of aged 7075 aluminum alloy. The results indicate that the average strength and hardness of the aged alloy samples exhibit a gradual increase as the deformation temperature rises. When subjected to a deformation temperature of 490°C, the alloy displays optimal tensile properties, with an ultimate tensile strength of 536 MPa and a yield strength of 480 MPa. Simultaneously, the increase of deformation temperature causes a reduction of dislocation density within the alloy, enhances the degree of recrystallization, and promotes more uniform grain size and tendency to sphericalization. Especially, with a lower deformation temperature, the primary precipitates precipitated early after hot deformation and then grow and coarsen during the subsequent aging. This results in a lower volume fraction of nanoscale precipitates during subsequent aging, which is the primary factor leading to the decrease of mechanical properties for the alloys with the reduction in deformation temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei Key Laboratory of Advanced Technology for Automobile Components, Wuhan University of Technology, Wuhan, PR China

Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan, PR China

Hubei Research Center for New Energy & Intelligent Connected Vehicle, Wuhan University of Technology, Wuhan, PR China

Dongshi (Wuhan) Auto parts Co., LTD, Wuhan, PR China

Hubei Longzhong Laboratory, Hubei, China

Funding

Innovative Research Team Development Program of Ministry of Education of China · National Natural Science Foundation of China · Open Fund of Hubei Longzhong Laboratory

References (28)

Show source-provided references
1. Yuan Y, Sui Y, Li P, et al. Multi-model integration accelerates Al-Zn-Mg-Cu alloy screening. J Mater Inform 2024; 4: 202434.
2. 10.1080/02670836.2023.219647110.1080/02670836.2023.2196471 ↗
3. 10.1016/j.matdes.2013.12.00210.1016/j.matdes.2013.12.002 ↗
4. 10.1016/j.matchar.2019.06.00310.1016/j.matchar.2019.06.003 ↗
5. 10.1016/j.matchar.2020.11080110.1016/j.matchar.2020.110801 ↗
6. 10.1179/1743284713Y.000000040710.1179/1743284713Y.0000000407 ↗
7. 10.1016/j.jmrt.2017.10.00410.1016/j.jmrt.2017.10.004 ↗
8. 10.1016/j.msea.2016.07.06210.1016/j.msea.2016.07.062 ↗
9. 10.1016/j.jmatprotec.2011.09.01810.1016/j.jmatprotec.2011.09.018 ↗
10. 10.1016/j.matchar.2022.11176210.1016/j.matchar.2022.111762 ↗
11. 10.1016/j.jallcom.2022.16754110.1016/j.jallcom.2022.167541 ↗
12. 10.1016/j.jmatprotec.2022.11771510.1016/j.jmatprotec.2022.117715 ↗
13. 10.1007/s11771-017-3454-410.1007/s11771-017-3454-4 ↗
14. 10.17222/mit.2018.06310.17222/mit.2018.063 ↗
15. 10.1016/j.matchar.2014.01.01910.1016/j.matchar.2014.01.019 ↗
16. Liu W, Liu D, Ma Y, et al. Effects of deformation temperature on microstructure and mechanical properties of 2A14 aluminum alloy. Chin J Nonferr Met 2015; 25: 308–314.
17. 10.1002/adem.20230047010.1002/adem.202300470 ↗
18. 10.1016/j.actamat.2018.10.04510.1016/j.actamat.2018.10.045 ↗
19. 10.1016/j.jallcom.2021.15945910.1016/j.jallcom.2021.159459 ↗
20. 10.1016/j.matchar.2019.04.04410.1016/j.matchar.2019.04.044 ↗
21. 10.1016/j.actamat.2016.02.01710.1016/j.actamat.2016.02.017 ↗
22. 10.2320/matertrans.MT-M201937010.2320/matertrans.MT-M2019370 ↗
23. 10.1016/j.msea.2022.14282110.1016/j.msea.2022.142821 ↗
24. 10.1007/s11661-012-1235-010.1007/s11661-012-1235-0 ↗
25. 10.1016/j.jallcom.2019.15258410.1016/j.jallcom.2019.152584 ↗
26. 10.1016/j.actamat.2013.09.04210.1016/j.actamat.2013.09.042 ↗
27. 10.1016/j.msea.2020.13974910.1016/j.msea.2020.139749 ↗
28. 10.1016/j.ijplas.2019.03.01310.1016/j.ijplas.2019.03.013 ↗