journal article·2025-07-09

Study on microstructure and mechanical property evolution in Cu-9Ni-6Sn-0.2Nb alloy by low temperature deformation

Siyang Xu, Yifu Jiang, Ximin Zang, Dongdong Cao, Qiang Gao, Junjia Zhang, Kai Wang, Tongyu Liu, Hua Ding

Publisher page

Abstract

The microstructure and mechanical property evolution, after low temperature deformation, in Cu-9Ni-6Sn-0.2Nb alloy has been investigated in this research. As the room-temperature engineering stress-strain curves shown, low temperature deformation can obviously improve the mechanical property of the alloys. When cold rolled at −196 °C, both yield strength and ultimate tensile strength of the specimen are obviously improved ∼11.58% and ∼9.94%, respectively, the distortion domain and the appearance of deformation twins both strengthen the alloy. After aging treatment, with a higher volume fraction of DP colonies in the cryo-deformed Cu-9Ni-6Sn-0.2Nb alloy, the electrical conductivity in the alloy is thus higher than that in the cold-rolled alloy. The microstructure and electrical-mechanical property results can offer helpful reference for Cu-Ni-Sn alloy manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Shenyang University of Technology, Shenyang, China

School of Mechanical Engineering, Shenyang Institute of Engineering, Shenyang, China

School of Materials Science and Engineering, Northeastern University, Shenyang, China

School of Materials Science and Engineering, Beihang University, Beijing, China

Funding

Basic Scientific Research Foundation of Higher Education Institutions of the Educational Department of Liaoning Province · Liaoning Provincial Science and Technology Plan Joint Fund · Natural Science Foundation of Liaoning Province · Fundamental Research Funds for the Central Universities · National Natural Science Foundation of China

References (43)

Show source-provided references
1. 10.1016/j.triboint.2015.06.03110.1016/j.triboint.2015.06.031 ↗
2. Sang SK, Rhu JC, Yun CJ, et al. Aging characteristics of thermomechanically processed Cu-9Ni-6Sn alloy. Scr Mater 1998; 40: –6.
3. 10.1016/j.matdes.2023.11244510.1016/j.matdes.2023.112445 ↗
4. Huang L, Wang W, Yang J, et al. Solute segregation-induced high-temperature oxidation behavior of Cu-Ni-Sn alloy via experimental and thermodynamic investigations. Corros Sci 2023; 216: 111071.10.1016/j.corsci.2023.111071 ↗
5. 10.1016/j.jallcom.2020.15375910.1016/j.jallcom.2020.153759 ↗
6. 10.1016/j.msea.2018.01.02210.1016/j.msea.2018.01.022 ↗
7. Wang M, Yang Q, Jiang Y, et al. Microstructure evolution and mechanical property of directionally solidified Cu-9Ni-6Sn alloy wire during aging. J Mater Res Technol 2022; 21: 474–485.10.1016/j.jmrt.2022.09.054 ↗
8. Zhang J, Liu Z, Guo Z, et al. Effects of zr on microstructural evolution and mechanical property of Cu-15Ni-8Sn alloy. Mater Sci Eng A 2022; 831: 142287.10.1016/j.msea.2021.142287 ↗
9. 10.1016/j.jmrt.2023.12.07310.1016/j.jmrt.2023.12.073 ↗
10. 10.1016/S1359-6454(98)00095-010.1016/S1359-6454(98)00095-0 ↗
11. Guo Z, Jie J, Liu S, et al. Effect of V addition on microstructures and mechanical properties of Cu-15Ni-8Sn alloy. Mater Sci Eng A 2019; 748: 85–94.10.1016/j.msea.2019.01.084 ↗
12. 10.1016/j.jallcom.2019.15222910.1016/j.jallcom.2019.152229 ↗
13. Zhou F, Zhou Y, Song K, et al. Mechanism of the synergistic effect of solid solution strengthening and fine grain strengthening in an as-cast Cu-9Ni-6Sn alloy induced by Mn. Mater Sci Eng A 2024; 892: 146110.10.1016/j.msea.2024.146110 ↗
14. Xu S, Li Y, Zhang M, et al. The effects of Nb additions on the microstructure evolution in Cu–9Ni–6Sn alloy. Intermetallics 2022; 143: 107497.10.1016/j.intermet.2022.107497 ↗
15. Xu S, Li Y, Zhang M, et al. Improving strength and elongation combination of Cu–9Ni–6Sn-(0.2Nb) alloys by pre-annealing and aging treatment. Mater Sci Eng A 2022; 860: 144221.10.1016/j.msea.2022.144221 ↗
16. Cheng J, Gao Y, Zhang Z, et al. Effect of yttrium on the cellular precipitation kinetics, grain growth behavior and mechanical properties of high strength Cu-15Ni-8Sn alloy. J Alloys Compd 2022; 918: 165408.10.1016/j.jallcom.2022.165408 ↗
17. 10.1016/j.msea.2020.13991710.1016/j.msea.2020.139917 ↗
18. Zhang J, Wang Z, miao S, et al. Effect of defect strengthening on the mechanical properties of a novel Cu–15Ni–8Sn alloy. Mater Sci Eng A 2023; 868: 144777.10.1016/j.msea.2023.144777 ↗
19. 10.1016/j.jallcom.2020.15527510.1016/j.jallcom.2020.155275 ↗
20. Li NJ, Li XN, Li ZM, et al. Differential effects of Zn and Co solutes on the properties of Cu–Ni–Sn alloys. Intermetallics 2020; 125: 106894.10.1016/j.intermet.2020.106894 ↗
21. Guo C, Shi Y, Chen J, et al. Effects of P addition on spinodal decomposition and discontinuous precipitation in Cu-15Ni-8Sn alloy. Mater Charact 2021; 171: 110760.10.1016/j.matchar.2020.110760 ↗
22. 10.1016/j.msea.2021.14202510.1016/j.msea.2021.142025 ↗
23. 10.1016/j.jallcom.2023.16964410.1016/j.jallcom.2023.169644 ↗
24. Gong Y, Guo C, Shi Y, et al. Effect of rare earth Er on discontinuous precipitation and mechanical properties of Cu-15Ni-8Sn-0.3Fe alloy. Mater Charact 2023; 205: 113293.10.1016/j.matchar.2023.113293 ↗
25. Zhang J, Zheng J, Chen X, et al. Effect of Hf addition on structural transformation and aging stability of Cu–15Ni–8Sn alloy. Mater Sci Eng A 2024; 899: 146434.10.1016/j.msea.2024.146434 ↗
26. Yu QX, Li XN, Wei KR, et al. Cu–Ni–Sn–Si alloys designed by cluster-plus-glue-atom model. Mater Des 2019; 167: 107641.10.1016/j.matdes.2019.107641 ↗
27. Guo C, Shi Y, Xiao X, et al. Enhanced softening resistance and mechanical properties of Cu-Ni-Sn alloy with Al, Zn and Si micro-alloying. J Alloys Compd 2022; 923: 166410.10.1016/j.jallcom.2022.166410 ↗
28. 10.1016/j.jmrt.2024.04.15010.1016/j.jmrt.2024.04.150 ↗
29. Xu S, Wei J, Han Y, et al. Improving the stability of microstructure and mechanical property in Cu-9Ni-6Sn-0.2Nb alloy by annealing treatment. Mater Sci Eng A 2024; 916: 147302.10.1016/j.msea.2024.147302 ↗
30. 10.1016/j.msea.2024.14747710.1016/j.msea.2024.147477 ↗
31. Yang W, Zhou Y, Yang R, et al. Effect mechanism of Nb addition on grain refinement and inhibition of discontinuous precipitation of Cu–15Ni–8Sn alloy. J Mater Res Technol 2024; 32: 3966–3979.10.1016/j.jmrt.2024.08.209 ↗
32. Zhou F, Zhou Y, Yang R, et al. Mn-Induced microstructural stabilization and mechanical strengthening in Cu-Ni-Sn alloys: A mechanistic exploration. Mater Sci Eng A 2024; 916: 147347.10.1016/j.msea.2024.147347 ↗
33. 10.1016/j.mtcomm.2024.11040710.1016/j.mtcomm.2024.110407 ↗
34. Kai-xuan J, Yan-jun Z, Ran Y, et al. Nanophase transformation and strengthening - toughening mechanism of the Cu–15Ni–8Sn alloy during aging. J Mater Res Technol 2023; 27: 2201–2215.10.1016/j.jmrt.2023.10.072 ↗
35. Xu S, Wei J, Zang X, et al. Hot deformation flow behavior of the Cu-9Ni-6Sn alloy based on the analysis of physical modeling and microstructures characterization. J Alloys Compd 2025; 1026: 180405.10.1016/j.jallcom.2025.180405 ↗
36. Xu S, Song T, Li Y, et al. The effect of Sn-rich phases on dynamic recrystallization behavior of Cu-9Ni-6Sn-(0.05 nb) alloys. Mater Today Commun 2023; 36: 106518.10.1016/j.mtcomm.2023.106518 ↗
37. Ouyang Y, Gan X, Li Z, et al. Microstructure evolution of a Cu-15Ni-8Sn-0.8Nb alloy during prior deformation and aging treatment. Mater Sci Eng A 2017; 704: 128–137.10.1016/j.msea.2017.07.065 ↗
38. Ouyang Y, Gan XP, Zhang SZ, et al. Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion. Trans Nonferrous Met Soc China 2017; 27: 1947–1955.10.1016/S1003-6326(17)60219-X ↗
39. 10.1016/j.jmst.2021.01.03410.1016/j.jmst.2021.01.034 ↗
40. 10.1016/j.jallcom.2020.15627510.1016/j.jallcom.2020.156275 ↗
41. 10.1016/j.jallcom.2018.09.04010.1016/j.jallcom.2018.09.040 ↗
42. Fu Q, Li B, Fu H, et al. Dislocation behavior and strengthening mechanisms of Cu–Te alloy drawn at room and cryogenic temperatures. J Mater Res Technol 2023; 26: 6419–6432.10.1016/j.jmrt.2023.08.253 ↗
43. 10.1016/j.matchar.2021.11109910.1016/j.matchar.2021.111099 ↗