journal article·2025-07-03

The influence of titanium on the microstructure and properties of Ti/h-BN/Fe composite coatings by plasma arc cladding

Tiantian He, Jie Tian, Gaoang Song, Yun Yue, Sanming Du, Yongzhen Zhang

Publisher page

Abstract

In order to improve the wear resistance and corrosion resistance of U75V steel for the application of the rail steel in high-speed railway, different concentrations of Ti (2%, 4%, 6%, and 8% by weight) were integrated into the Ti/h-BN/Fe composite coatings, fabricated on U75V steel substrates through plasma arc cladding. The study explored how variations in Ti concentration affected the coating's microstructure, hardness, residual stresses, tribological behavior, and electrochemical characteristics. SEM analysis showed that the microstructural configurations varied from dendritic to columnar to equiaxed, depending on the Ti content. The surfaces of these coatings were compact and exhibited no visible cracks or defects. Microhardness values escalated from 770.4 HV 0.5 at 2% Ti to 911.2 HV 0.5 at 8 wt.% Ti. Concurrently, compressive residual stresses on the surfaces also enhanced from 611.4 MPa to 755.6 MPa with increasing Ti percentages. The friction and wear test was carried out by using the UMT-2 multifunctional friction and wear tester with a load of 30N, and the results show that friction coefficients and wear rates initially increased, subsequently decreased, and then ascended as the Ti content was incremented. Optimal tribological properties were noted at a Ti concentration of 6 wt.%, where the friction coefficient and wear rate dropped to 0.387 and 3.7 × 10 −3 mm 3 ·N −1 ·m −1 , respectively, attributed primarily to adhesive wear. Moreover, the corrosion resistance varied inversely with Ti levels, demonstrating a decrease followed by an increase. The most effective corrosion resistance was at 6 wt.% Ti, showcasing the highest self-corrosion potential (E oor ) at −0.1972 V and the lowest corrosion current density (j oor ) at 3.1224 × 10 −9 A·cm −2 , signifying superior corrosion resistance at this concentration. The coating with 6 wt.% Ti content exhibits optimal wear resistance and corrosion resistance, thereby providing a theoretical foundation for the potential application of such coatings on railway tracks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang, China

Collaborative Innovation Center of Nonferrous Metals, Henan University of Science and Technology, Luoyang, China

Funding

National Natural Science Foundation of China

References (40)

Show source-provided references
1. 10.1080/13287982.2020.184001210.1080/13287982.2020.1840012 ↗
2. 10.1515/corrrev-2020-006910.1515/corrrev-2020-0069 ↗
3. 10.1016/0043-1648(84)90066-810.1016/0043-1648(84)90066-8 ↗
4. 10.3390/coatings1310170110.3390/coatings13101701 ↗
5. Lupu FC, Munteanu C, Sachelarie AC, et al. Istrate. Improving the usage properties of steel using cold spray deposition: a review. Crystals (Basel) 2023; 13: 45.
6. 10.1007/s00170-024-14476-w10.1007/s00170-024-14476-w ↗
7. 10.1016/j.ceramint.2023.11.39510.1016/j.ceramint.2023.11.395 ↗
8. 10.1016/j.jmrt.2023.01.11310.1016/j.jmrt.2023.01.113 ↗
9. 10.1007/s41230-021-9012-610.1007/s41230-021-9012-6 ↗
10. 10.1007/s12613-020-2040-110.1007/s12613-020-2040-1 ↗
11. 10.1016/j.rineng.2022.10050610.1016/j.rineng.2022.100506 ↗
12. Wu CY, Niu MY, Bao S, et al. Friction and wear properties of Ni3Si alloy with Ti addition at High temperatures. Materials (Basel) 2020; 13: 82.
13. 10.1080/02670844.2016.121253110.1080/02670844.2016.1212531 ↗
14. 10.1016/j.apsusc.2012.01.07210.1016/j.apsusc.2012.01.072 ↗
15. 10.1016/j.apsusc.2019.07.20910.1016/j.apsusc.2019.07.209 ↗
16. Kusinski J, Kac S, Szwachta G, et al. Wear resistance of the Ti/TiC coatings deposited by means of supersonic cold gas spray technique. In: TMS 2014: 143 rd Annual Meeting and Exhibition: Annual Meeting Supplemental Proceedings. Springer International Publishing, 2016, pp.1173–1180.
17. 10.1016/j.ceramint.2018.05.02210.1016/j.ceramint.2018.05.022 ↗
18. 10.1016/j.jmrt.2023.12.08710.1016/j.jmrt.2023.12.087 ↗
19. 10.1007/s11665-023-08454-810.1007/s11665-023-08454-8 ↗
20. 10.1016/j.matchemphys.2023.12756610.1016/j.matchemphys.2023.127566 ↗
21. 10.1007/s12613-015-1114-y10.1007/s12613-015-1114-y ↗
22. 10.1016/j.surfcoat.2017.10.04910.1016/j.surfcoat.2017.10.049 ↗
23. 10.1016/j.jallcom.2022.16773810.1016/j.jallcom.2022.167738 ↗
24. 10.1016/j.surfcoat.2022.12863810.1016/j.surfcoat.2022.128638 ↗
25. 10.1016/S0040-6090(01)01360-810.1016/S0040-6090(01)01360-8 ↗
26. 10.1007/BF0322238110.1007/BF03222381 ↗
27. 10.1007/s11665-016-2058-810.1007/s11665-016-2058-8 ↗
28. 10.1080/02670844.2017.134936210.1080/02670844.2017.1349362 ↗
29. 10.1016/j.pnsc.2007.12.00410.1016/j.pnsc.2007.12.004 ↗
30. 10.1179/02670840010151723310.1179/026708400101517233 ↗
31. 10.1016/j.ijfatigue.2006.05.00810.1016/j.ijfatigue.2006.05.008 ↗
32. 10.1007/s11665-019-04479-010.1007/s11665-019-04479-0 ↗
33. 10.1007/s11249-023-01736-110.1007/s11249-023-01736-1 ↗
34. 10.3390/e2207074010.3390/e22070740 ↗
35. 10.1016/j.apsusc.2007.12.03410.1016/j.apsusc.2007.12.034 ↗
36. 10.1016/j.scriptamat.2008.07.03510.1016/j.scriptamat.2008.07.035 ↗
37. 10.1016/S0257-8972(03)00576-010.1016/S0257-8972(03)00576-0 ↗
38. 10.1016/j.jallcom.2023.17043810.1016/j.jallcom.2023.170438 ↗
39. 10.1016/j.apsusc.2010.03.05810.1016/j.apsusc.2010.03.058 ↗
40. 10.1016/j.ceramint.2018.04.12110.1016/j.ceramint.2018.04.121 ↗