journal article·2025-05-08

Solar powder metallurgy: An efficient processing of copper foams

Antonio Cañadilla, Gloria P Rodríguez, Ana Romero

Publisher page

Abstract

Powder metallurgy methodology and a novel solar sintering process are combined to successfully produce porous copper foams with varying porosities from 50 to 70% vol. Firstly, pure copper powder was mixed with saccharose particles acting as spacer-holder and compacted into cylindrical shapes. Saccharose dissolution time, which ranged from 8 to 32 h, was inversely related to the target porosity. Concentrated solar energy, focused using a Fresnel lens, was applicated for the sintering of the remaining copper structures at 850 °C for 10 min. Comparing to conventional sintering in electrical furnace (1075 °C for 8 h), the solar sintering process achieved a full densification at a lower temperature and in a much shorter time. Density, pore size, and porosity morphology and distribution were analysed. The final copper foams exhibited uniform pore distribution and achieved porosities close to the target values, with roughly half of the porosity being open. Additionally, the compressive strength of the solar sintered foams matched, and in some cases, surpassed, that of conventional sintered foams. The utilization of concentrated solar energy has allowed to obtain high quality and densification copper foams with a good combination of mechanical properties and lightweight.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Industrial and Aerospace Engineering, University of Castilla-La Mancha (EIIAA-UCLM), Toledo, Spain

Institute of Applied Aeronautical Industry Research, University of Castilla-La Mancha (ENAIA-UCLM), Toledo, Spain

Higher Technical School of Industrial Engineering of Ciudad Real, University of Castilla-La Mancha (ETSII-UCLM), Ciudad Real, Spain

Institute of Energy Research and Industrial Applications, University of Castilla-La Mancha (INEI-UCLM), Ciudad Real, Spain

Funding

Universidad de Castilla-La Mancha · Junta de Comunidades de Castilla-La Mancha · Ministerio de Ciencia, Innovación y Universidades

References (58)

Show source-provided references
1. Goodall R, Mortensen A. «24 - porous metals». 5th ed.. Physical Metallurgy, 2014, pp. 2399–2595.
2. 10.1016/j.matdes.2013.01.07710.1016/j.matdes.2013.01.077 ↗
3. Ashby MF, Evans T, Fleck NA, et al. Metal foams: a design guide. Elsevier, 2000.
4. 10.1016/j.electacta.2006.12.01510.1016/j.electacta.2006.12.015 ↗
5. 10.1016/j.ijhydene.2009.06.03510.1016/j.ijhydene.2009.06.035 ↗
6. 10.1002/352760055810.1002/3527600558 ↗
7. 10.1007/BF0055498110.1007/BF00554981 ↗
8. 10.1002/pssa.20072312110.1002/pssa.200723121 ↗
9. 10.1016/j.ijheatfluidflow.2005.08.00510.1016/j.ijheatfluidflow.2005.08.005 ↗
10. 10.1016/j.matdes.2011.09.05910.1016/j.matdes.2011.09.059 ↗
11. 10.1016/j.matlet.2005.05.06810.1016/j.matlet.2005.05.068 ↗
12. 10.1016/j.matdes.2012.04.02410.1016/j.matdes.2012.04.024 ↗
13. 10.1016/j.matdes.2011.07.05510.1016/j.matdes.2011.07.055 ↗
14. 10.1016/j.matdes.2007.01.02610.1016/j.matdes.2007.01.026 ↗
15. 10.1016/j.msea.2009.10.06210.1016/j.msea.2009.10.062 ↗
16. 10.1016/j.matchar.2015.11.01010.1016/j.matchar.2015.11.010 ↗
17. 10.1016/j.scriptamat.2004.10.01210.1016/j.scriptamat.2004.10.012 ↗
18. 10.1243/09544054JEM83210.1243/09544054JEM832 ↗
19. 10.1557/PROC-1188-LL04-0710.1557/PROC-1188-LL04-07 ↗
20. 10.1557/jmr.2013.19010.1557/jmr.2013.190 ↗
21. 10.1016/j.jmps.2007.11.00710.1016/j.jmps.2007.11.007 ↗
22. 10.1016/j.msea.2011.02.03110.1016/j.msea.2011.02.031 ↗
23. 10.1016/S0079-6425(00)00002-510.1016/S0079-6425(00)00002-5 ↗
24. 10.1016/j.powtec.2007.01.02710.1016/j.powtec.2007.01.027 ↗
25. 10.4028/www.scientific.net/MSF.539-543.186310.4028/www.scientific.net/MSF.539-543.1863 ↗
26. 10.1016/j.matdes.2015.08.02210.1016/j.matdes.2015.08.022 ↗
27. 10.1016/j.proche.2016.03.05110.1016/j.proche.2016.03.051 ↗
28. 10.1016/j.proche.2016.03.05210.1016/j.proche.2016.03.052 ↗
29. 10.1016/j.rinp.2020.10365510.1016/j.rinp.2020.103655 ↗
30. Herranz G, Rodriguez GP. Uses of concentrated solar energy in materials science. Sol Energy 2010; 1: 1–27.
31. 10.1016/0927-0248(94)00169-S10.1016/0927-0248(94)00169-S ↗
32. 10.1016/j.solmat.2004.11.01710.1016/j.solmat.2004.11.017 ↗
33. 10.1016/j.apsusc.2013.06.12810.1016/j.apsusc.2013.06.128 ↗
34. 10.1016/j.solener.2013.05.01910.1016/j.solener.2013.05.019 ↗
35. 10.1016/j.jmatprotec.2015.04.01510.1016/j.jmatprotec.2015.04.015 ↗
36. 10.1016/j.jallcom.2021.16187610.1016/j.jallcom.2021.161876 ↗
37. 10.1016/j.jmatprotec.2020.11661610.1016/j.jmatprotec.2020.116616 ↗
38. 10.1016/j.matdes.2013.09.02710.1016/j.matdes.2013.09.027 ↗
39. Cañadilla A, Rodríguez GP, Romero A, et al. Sustainable production of copper components using concentrated solar energy in material extrusion additive manufacturing (MEX-CSE). Sustain Mater Technol 2024; 39: e00799.
40. 10.1016/j.matlet.2016.09.03710.1016/j.matlet.2016.09.037 ↗
41. 10.1016/j.solener.2009.11.01410.1016/j.solener.2009.11.014 ↗
42. García-Cambronero LE, Cañadas I, Diaz JJ, et al. Properties of aluminum nodules foamed with concentrated solar energy. EURO PM 2011; 2011: 339–344.
43. 10.3390/met1110154410.3390/met11101544 ↗
44. 10.1016/j.matdes.2013.07.04710.1016/j.matdes.2013.07.047 ↗
45. 10.1115/1.163878310.1115/1.1638783 ↗
46. ISO 2738:1999. Sintered metal materials excluding hardmetals - Permeable sintered metal materials - Determination of density oil content and open porosity.
47. U.-E. I. 4506:2018 «Materiales metálicos sinterizados excepto metal duro. Ensayo de compresión» 2018.
48. 10.1016/j.matdes.2010.09.02910.1016/j.matdes.2010.09.029 ↗
49. Hussain Z, Suffin NA. Microstructure and mechanical behavior of aluminum foam produced by sintering dissolution process using NaCl space holder. J Eng Sci 2011; 7: 37–49.
50. 10.1016/j.msea.2003.08.00410.1016/j.msea.2003.08.004 ↗
51. Kennedy A. Porous metals and metal foams made from powders. Powder Metall 2012; 2: 31–46.
52. 10.1016/j.jmatprotec.2011.12.01510.1016/j.jmatprotec.2011.12.015 ↗
53. 10.1007/s11663-003-0056-310.1007/s11663-003-0056-3 ↗
54. 10.1007/s10934-017-0467-110.1007/s10934-017-0467-1 ↗
55. Gibson LJ, Ashby MF. Cellular solids: Structure & properties. Oxford: Pergamon Press, 1988.
56. 10.1016/j.scriptamat.2005.04.05510.1016/j.scriptamat.2005.04.055 ↗
57. 10.1016/j.jmrt.2021.11.10810.1016/j.jmrt.2021.11.108 ↗
58. 10.3390/met1304079110.3390/met13040791 ↗