journal article·2025-06-12

Impact brittleness induced by rapid grain growth in Fe-23Co soft magnetic alloy

Dongbo Yang, Yalin Li, Guizhi Pi, Wenjiang Qiang

Publisher page

Abstract

Long- and short-range ordering (L/SRO) in low-cobalt iron-cobalt alloys significantly lead to notch and impact brittleness. High-temperature heat treatment suppresses LROs and SROs, but it suffers from rapid grain growth, which also deteriorates mechanical properties. A critical challenge in developing low-cobalt Fe-Co alloys lies in suppressing both ordering-induced embrittlement and grain coarsening during high-temperature processing. In this work, effects of grain growth on the mechanical properties of γ -quenched Fe-23 wt.% Co alloy were studied (free of LROs and SROs). After heat treatment for different time, both the average grain size and size distribution increased with increasing holding time, resulting in impact brittleness characterized by a cleavage fracture mode. In comparison to tensile properties, the deformation and fracture behavior of impact samples is significantly influenced by grain growth. When the average grain diameter exceeds 100 μm, the impact property transitions from ductile fracture to brittle fracture. However, when the average grain size does not exceed 190 μm, the tensile properties continue to exhibit favorable strength and plasticity. Our findings indicate that the brittleness observed in Fe-23Co samples quenched from the γ phase region is mainly caused by the rapid grain growth. The Fe-23Co alloy, characterized by good impact toughness and tensile plasticity, can be achieved by quenching after a short holding time from the γ phase region.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, University of Science & Technology Beijing, Beijing China

References (51)

Show source-provided references
1. 10.1109/20.90880510.1109/20.908805 ↗
2. 10.1016/0001-6160(80)90099-110.1016/0001-6160(80)90099-1 ↗
3. 10.1016/S0079-6425(99)00002-X10.1016/S0079-6425(99)00002-X ↗
4. 10.1063/1.36509510.1063/1.365095 ↗
5. 10.1016/S1359-6454(03)00228-310.1016/S1359-6454(03)00228-3 ↗
6. Fingers RT Coate JE Dowling NE et al. Mechanical properties of iron-cobalt alloys for power applications. In: 32nd Intersociety Energy Conversion Engineering Conference (IECEC-97) 1997 Jul 27-Aug 02 Honolulu HIYear; Published.
7. 10.1016/j.pmatsci.2005.04.00110.1016/j.pmatsci.2005.04.001 ↗
8. Clegg DW, Buckley RA. The disorder→order transformation in iron-cobalt-based alloys. Mater Sci Technol 2013; 7: 48–54.
9. 10.1016/0001-6160(76)90069-910.1016/0001-6160(76)90069-9 ↗
10. 10.1002/pssa.221034010910.1002/pssa.2210340109 ↗
11. 10.1063/1.36173210.1063/1.361732 ↗
12. Rajkovic M, Buckley RA. Ordering transformations in Fe-50Co based alloys. Mater Sci Technol 1980; 15: 21–29.
13. 10.1016/S0921-5093(01)01594-510.1016/S0921-5093(01)01594-5 ↗
14. 10.1016/j.msea.2016.03.08310.1016/j.msea.2016.03.083 ↗
15. 10.1016/j.jmmm.2022.17029110.1016/j.jmmm.2022.170291 ↗
16. 10.1016/j.msea.2022.14371810.1016/j.msea.2022.143718 ↗
17. 10.1016/j.jallcom.2022.16664910.1016/j.jallcom.2022.166649 ↗
18. 10.1063/1.37003610.1063/1.370036 ↗
19. 10.1179/174328005X1433910.1179/174328005X14339 ↗
20. 10.1080/0141861990821201110.1080/01418619908212011 ↗
21. 10.1080/0141861980822407710.1080/01418619808224077 ↗
22. 10.1016/j.matlet.2022.13255210.1016/j.matlet.2022.132552 ↗
23. 10.1016/S0921-5093(03)00344-710.1016/S0921-5093(03)00344-7 ↗
24. 10.1016/j.scriptamat.2009.03.04410.1016/j.scriptamat.2009.03.044 ↗
25. 10.1007/BF0265640910.1007/BF02656409 ↗
26. 10.1016/0001-6160(86)90026-X10.1016/0001-6160(86)90026-X ↗
27. 10.2355/isijinternational.54.195810.2355/isijinternational.54.1958 ↗
28. 10.1007/s11223-020-00155-010.1007/s11223-020-00155-0 ↗
29. Wang QL, Li R, Xie WX, et al. Influence of strengthening elements and heat treatment on microstructure and fracture toughness of NiAl-Cr(Mo)-based eutectic alloy. Materials (Basel) 2023; 16: 3362.
30. 10.1016/j.msea.2011.07.07210.1016/j.msea.2011.07.072 ↗
31. 10.1016/j.jmrt.2024.02.13210.1016/j.jmrt.2024.02.132 ↗
32. 10.1557/JMR.2000.011810.1557/JMR.2000.0118 ↗
33. 10.1016/0001-6160(71)90046-010.1016/0001-6160(71)90046-0 ↗
34. 10.1016/0304-8853(80)90597-110.1016/0304-8853(80)90597-1 ↗
35. Pitt CD, Rawlings RD. Lüders strain and ductility of ordered Fe-Co-2V and Fe-Co-V-Ni alloys. Mater Sci Technol 1983; 17: 261–266.
36. Jordan KR, Stoloff NS. Plastic deformation and fracture in FeCo-2 percent V. Trans Metal Soc AIME 1969; 245: 2027–2034.
37. 10.1063/1.196842710.1063/1.1968427 ↗
38. 10.1023/A:101758841188810.1023/A:1017588411888 ↗
39. 10.1016/j.msea.2021.14150410.1016/j.msea.2021.141504 ↗
40. 10.1016/j.jmrt.2021.10.06010.1016/j.jmrt.2021.10.060 ↗
41. 10.1109/20.90880910.1109/20.908809 ↗
42. 10.1016/0956-7151(94)90020-510.1016/0956-7151(94)90020-5 ↗
43. 10.1557/JMR.1988.066510.1557/JMR.1988.0665 ↗
44. 10.1016/0956-7151(90)90050-Q10.1016/0956-7151(90)90050-Q ↗
45. 10.1016/0001-6160(85)90152-X10.1016/0001-6160(85)90152-X ↗
46. 10.1016/0001-6160(86)90027-110.1016/0001-6160(86)90027-1 ↗
47. 10.1023/A:100761450550910.1023/A:1007614505509 ↗
48. 10.3379/jmsjmag.23.39710.3379/jmsjmag.23.397 ↗
49. 10.1063/1.145393910.1063/1.1453939 ↗
50. 10.1016/j.msea.2013.04.06610.1016/j.msea.2013.04.066 ↗
51. 10.1002/pssa.221066023110.1002/pssa.2210660231 ↗