journal article·2025-05-08

Influence of the space holder particles morphology on the structure and mechanical properties of aluminum foams manufactured by infiltration

Christian Reyes, Lada Domratcheva-Lvova, Dante Arteaga, Luis Olmos, Alberto Beltrán, Ismeli Alfonso

Publisher page

Abstract

Aluminum foams excel as versatile materials by combining porous structures with aluminum alloys properties. The infiltration method provides precise control over pore size and distribution, but depends on space holder particles (SHP) characteristics. This study examines the influence of SHP morphology on the structural and mechanical properties of infiltrated aluminum foams. Al-319 alloy was used with NaCl SHPs (∼5 mm of equivalent diameter) with three morphologies: spherical, ellipsoidal, and irregular. Structural characterization included density measurements, image analysis, and computed tomography. Uniaxial compression tests revealed that foams with granulated pores had the lowest properties (E = 1.15 GPa, σ pt = 13.19 MPa, E abs = 7.51 MJ/m³), while spherical pores maximized energy absorption (10 MJ/m³) due to improved load distribution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Facultad de Ingeniería Mecánica, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Michoacán, México

Facultad de Ingeniería en Tecnología de la Madera, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Michoacán, México

Instituto de Geociencias, Universidad Nacional Autónoma de México, Querétaro, México

Instituto de Investigaciones en Ciencias de la Tierra (INICIT), Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Michoacán, México

Instituto de Investigaciones en Materiales, Unidad Morelia, Universidad Nacional Autónoma de México, Campus Morelia UNAM, Morelia, Michoacán, México

Funding

Universidad Nacional Autónoma de México · Consejo Nacional de Humanidades, Ciencias y Tecnologías

References (25)

Show source-provided references
1. 10.1016/S0079-6425(00)00002-510.1016/S0079-6425(00)00002-5 ↗
2. 10.1016/j.matpr.2020.02.37510.1016/j.matpr.2020.02.375 ↗
3. 10.1016/j.jmapro.2023.03.01510.1016/j.jmapro.2023.03.015 ↗
4. 10.1002/(SICI)1527-2648(200004)2:4<188::AID-ADEM188>3.0.CO;2-G10.1002/(SICI)1527-2648(200004)2:4<188::AID-ADEM188>3.0.CO;2-G ↗
5. 10.1016/j.proche.2016.03.09910.1016/j.proche.2016.03.099 ↗
6. 10.1007/s41230-022-1159-210.1007/s41230-022-1159-2 ↗
7. Ashby MF, Evans AG, Fleck NA, et al. Metal foams: a design guide. In: Butterworth-Heineman (eds). Making metal foams. 1st ed. Woburn: Planta Tree, 2000, pp.6–7.
8. 10.1016/j.powtec.2011.09.01310.1016/j.powtec.2011.09.013 ↗
9. 10.1088/0953-8984/19/40/40621510.1088/0953-8984/19/40/406215 ↗
10. 10.1016/j.powtec.2016.12.09410.1016/j.powtec.2016.12.094 ↗
11. 10.1016/j.powtec.2012.05.03310.1016/j.powtec.2012.05.033 ↗
12. 10.1016/j.matdes.2020.10886610.1016/j.matdes.2020.108866 ↗
13. 10.3390/ma1420620610.3390/ma14206206 ↗
14. 10.1016/j.jmrt.2023.05.28010.1016/j.jmrt.2023.05.280 ↗
15. 10.1016/j.matdes.2012.04.02410.1016/j.matdes.2012.04.024 ↗
16. 10.1016/j.matchemphys.2021.12511510.1016/j.matchemphys.2021.125115 ↗
17. 10.1016/j.matdes.2010.04.03810.1016/j.matdes.2010.04.038 ↗
18. 10.3390/ma1407161910.3390/ma14071619 ↗
19. 10.3390/met101004910.3390/met1010049 ↗
20. 10.1016/j.msea.2007.02.00210.1016/j.msea.2007.02.002 ↗
21. Rasband WS. ImageJ. Bethesda, Maryland, USA: U.S. National Institytes of Health, 1997.
22. 10.1016/j.msea.2006.11.09110.1016/j.msea.2006.11.091 ↗
23. 10.1016/j.jma.2013.11.00610.1016/j.jma.2013.11.006 ↗
24. Gibson LJ, Ashby MF. Material properties. In: Cellular Solids: Structure and Properties. 2nd ed. Cambridge: Cambridge University Press, 1999, pp.52.
25. 10.1111/j.1151-2916.1984.tb09622.x10.1111/j.1151-2916.1984.tb09622.x ↗