journal article·2025-04-25

Elucidating the role of processing parameters on microstructure, grain refinement, and mechanical features of Al/Ti laminated composite fabricated by accumulative roll bonding

Juan Xu, Sarah Panahi, Ibrahim Roshan, Reza Javid

Publisher page

Abstract

Multilayered composites are widely used in automobile components. The properties of multilayered composites mainly depend on processing parameters. In this investigation, Al/Ti composites were fabricated by accumulative roll bonding (ARB). The influence of rolling parameters including rolling velocity (10 < v < 20 r/min), rolling cycle (7 cycles), and friction coefficient (0.08 < µ < 0.14) on the evolution of microstructure, grain refinement, variations of hardness, and tensile features were examined. The results of microstructural characterization showed that the layers became more discontinuous and the broken pieces of Ti were better distributed in the Al matrix when the rolling cycle and rolling friction increased and the rolling velocity decreased. In addition, the characterization of grain structure revealed grain refinement in Ti and Al layers after the 7 th cycle. The grain structure was better refined when the friction coefficient was 0.14 and rolling velocity was 10 r/min. The hardness and strength values increased as the rolling cycle and friction coefficient increased and the rolling velocity decreased. When the friction coefficient was 0.14 and the rolling velocity was 20 r/min, the highest strength of 520 MPa was obtained and the maximum hardness of Ti and Al were 76 HV and 292 HV, respectively. Although the fracture surfaces showed delamination and different sizes of dimples, a larger number of dimples were observed at higher rolling velocities and lower friction coefficients.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sichuan Top Information Technology Vocational Institute, Gaoxin West District, Chengdu City, Sichuan Province, China

Department of Mechanical Engineering, Özyeğin University, Istanbul, Turkey

References (84)

Show source-provided references
1. 10.1007/s00170-011-3493-110.1007/s00170-011-3493-1 ↗
2. 10.1016/j.ijhydene.2025.02.01710.1016/j.ijhydene.2025.02.017 ↗
3. 10.1002/adfm.20231603610.1002/adfm.202316036 ↗
4. 10.1016/j.jallcom.2022.16799810.1016/j.jallcom.2022.167998 ↗
5. 10.1109/TUFFC.2011.203810.1109/TUFFC.2011.2038 ↗
6. 10.1016/j.triboint.2023.10821810.1016/j.triboint.2023.108218 ↗
7. 10.1016/j.ijrmhm.2010.09.00110.1016/j.ijrmhm.2010.09.001 ↗
8. 10.1016/j.ijmecsci.2025.11004810.1016/j.ijmecsci.2025.110048 ↗
9. 10.1016/j.matdes.2022.11140810.1016/j.matdes.2022.111408 ↗
10. Jing H, Lin Q, Liu M, et al. Electromechanical braking systems and control technology: a survey and practice. Proc Inst Mechan Eng, Part D: J Automob Eng 2024: 09544070241271826.
11. 10.1007/s40194-024-01704-w10.1007/s40194-024-01704-w ↗
12. 10.1016/j.jre.2022.05.01810.1016/j.jre.2022.05.018 ↗
13. 10.1557/s43577-024-00720-x10.1557/s43577-024-00720-x ↗
14. 10.1016/j.engfracmech.2023.10913710.1016/j.engfracmech.2023.109137 ↗
15. 10.1016/j.ijsolstr.2022.11209810.1016/j.ijsolstr.2022.112098 ↗
16. 10.1016/j.asoc.2023.11099110.1016/j.asoc.2023.110991 ↗
17. 10.1016/j.jmst.2023.11.05410.1016/j.jmst.2023.11.054 ↗
18. 10.3390/met1107108610.3390/met11071086 ↗
19. 10.1016/j.jallcom.2024.17803210.1016/j.jallcom.2024.178032 ↗
20. 10.1016/j.matlet.2006.05.03810.1016/j.matlet.2006.05.038 ↗
21. 10.1016/j.matchar.2022.11173610.1016/j.matchar.2022.111736 ↗
22. 10.1063/5.018670010.1063/5.0186700 ↗
23. 10.1016/j.jmapro.2025.01.02510.1016/j.jmapro.2025.01.025 ↗
24. 10.1063/5.020677410.1063/5.0206774 ↗
25. Zhang Y, Xu L, Wang J, et al. Bagasse-based porous flower-like MoS2/carbon composites for efficient microwave absorption. Carbon Lett 2024; 35: 1–16.
26. 10.1016/j.jobe.2025.11178210.1016/j.jobe.2025.111782 ↗
27. 10.1016/j.ijmecsci.2023.10824410.1016/j.ijmecsci.2023.108244 ↗
28. 10.3390/nano1424203410.3390/nano14242034 ↗
29. 10.1007/s11661-024-07669-110.1007/s11661-024-07669-1 ↗
30. 10.1016/j.jallcom.2025.17874110.1016/j.jallcom.2025.178741 ↗
31. 10.1016/j.msea.2016.07.10810.1016/j.msea.2016.07.108 ↗
32. 10.3390/aerospace706007710.3390/aerospace7060077 ↗
33. 10.1016/j.jmatprotec.2024.11860010.1016/j.jmatprotec.2024.118600 ↗
34. Su L, Nie N, Deng G, et al. Grain refinement for aluminum alloys in aerospace applications. Alum Technol Aerosp Appl: Springer 2025: 127–147. DOI: https://doi.org/10.1007/978-3-031-82447-0_6.
35. 10.2320/matertrans.M201630710.2320/matertrans.M2016307 ↗
36. 10.1007/s11771-023-5524-010.1007/s11771-023-5524-0 ↗
37. 10.1016/j.scriptamat.2008.01.02210.1016/j.scriptamat.2008.01.022 ↗
38. 10.1007/s12598-015-0519-010.1007/s12598-015-0519-0 ↗
39. 10.1016/j.actamat.2007.07.00210.1016/j.actamat.2007.07.002 ↗
40. 10.1016/j.ces.2012.02.02610.1016/j.ces.2012.02.026 ↗
41. 10.1016/j.proeng.2017.04.09910.1016/j.proeng.2017.04.099 ↗
42. 10.1007/s12666-024-03546-y10.1007/s12666-024-03546-y ↗
43. 10.1007/s43452-025-01136-310.1007/s43452-025-01136-3 ↗
44. 10.1088/1742-6596/240/1/01210810.1088/1742-6596/240/1/012108 ↗
45. 10.1016/j.cja.2022.07.00410.1016/j.cja.2022.07.004 ↗
46. Bay N. Mechanisms producing metallic bonds in cold welding. Welding J 1983; 62: 137.
47. 10.1007/s10853-008-2614-110.1007/s10853-008-2614-1 ↗
48. 10.1007/s11665-022-06777-610.1007/s11665-022-06777-6 ↗
49. 10.1016/j.ijmachtools.2021.10381510.1016/j.ijmachtools.2021.103815 ↗
50. 10.1007/s10853-022-06919-010.1007/s10853-022-06919-0 ↗
51. 10.3390/ma1404101210.3390/ma14041012 ↗
52. 10.1016/j.actamat.2022.11764110.1016/j.actamat.2022.117641 ↗
53. 10.1021/accountsmr.0c0007510.1021/accountsmr.0c00075 ↗
54. 10.1016/j.jmrt.2019.12.01610.1016/j.jmrt.2019.12.016 ↗
55. Schmidt CW, Knieke C, Maier V, et al. Influence of nanoparticle reinforcement on the mechanical properties of ultrafine-grained aluminium produced by ARB. Mater Sci Forum: Trans Tech Publ 2011; 667: 725–730.
56. 10.1007/BF0302642310.1007/BF03026423 ↗
57. 10.1007/s00170-016-8890-z10.1007/s00170-016-8890-z ↗
58. Singh VP, Gupta GK, Mishra S. Microstructural evolution and mechanical properties of multi-layered aluminum alloy 6061 processed by accumulative roll bonding. J Mater Eng Perform 2024: 1–12.
59. 10.1007/BF0268641210.1007/BF02686412 ↗
60. 10.1016/j.apm.2012.09.07010.1016/j.apm.2012.09.070 ↗
61. 10.1016/S1003-6326(23)66359-910.1016/S1003-6326(23)66359-9 ↗
62. 10.1016/j.triboint.2005.11.02110.1016/j.triboint.2005.11.021 ↗
63. Liu X Liewald M Becker D. Effects of rolling direction and lubricant on friction in sheet metal forming. 2009.10.1115/1.3201843 ↗
64. 10.2320/matertrans.44.138210.2320/matertrans.44.1382 ↗
65. 10.1016/j.msea.2023.14577410.1016/j.msea.2023.145774 ↗
66. 10.1088/1742-6596/165/1/01201110.1088/1742-6596/165/1/012011 ↗
67. 10.1007/s11665-019-04228-310.1007/s11665-019-04228-3 ↗
68. 10.4028/www.scientific.net/MSF.584-586.79110.4028/www.scientific.net/MSF.584-586.791 ↗
69. 10.1007/s11661-020-05873-310.1007/s11661-020-05873-3 ↗
70. 10.1016/j.jmrt.2023.11.17010.1016/j.jmrt.2023.11.170 ↗
71. 10.1016/j.actamat.2006.02.04610.1016/j.actamat.2006.02.046 ↗
72. 10.1016/j.pmatsci.2013.09.00210.1016/j.pmatsci.2013.09.002 ↗
73. 10.1016/j.commatsci.2009.03.00510.1016/j.commatsci.2009.03.005 ↗
74. 10.1016/j.matchar.2010.10.00310.1016/j.matchar.2010.10.003 ↗
75. 10.1007/s11837-022-05442-610.1007/s11837-022-05442-6 ↗
76. 10.1016/j.jmrt.2022.09.03710.1016/j.jmrt.2022.09.037 ↗
77. 10.1016/j.jmst.2024.01.06010.1016/j.jmst.2024.01.060 ↗
78. Wu H, Wang Y, Wu R, et al. Microstructure, mechanical properties and strain hardening behavior of alternative α/β mg-li composite sheets prepared by accumulative roll bonding. Metals Mater Int 2021; 28: 1–13.
79. Zhang Y, Mishin O, Godfey A, et al. Through-thickness variations of microstructure and texture in nickel processed by accumulative roll bonding. Mater Sci 2012; 33: 417–422.
80. 10.1016/j.jallcom.2008.06.16110.1016/j.jallcom.2008.06.161 ↗
81. 10.1016/j.actamat.2004.12.02210.1016/j.actamat.2004.12.022 ↗
82. 10.1016/j.jmst.2021.01.05010.1016/j.jmst.2021.01.050 ↗
83. 10.1016/j.jmst.2024.02.01910.1016/j.jmst.2024.02.019 ↗
84. 10.2298/JMMB140829028A10.2298/JMMB140829028A ↗