Microstructure and tensile properties of Al-Mn-Mg-Sc-Zr alloy processed by friction rolling additive manufacturing
Source abstract
Abstract
Solid-state additive manufacturing (SSAM) has garnered more attentions in recent years. Due to the non-equilibrium solidification during powder preparation, supersaturated alloy powders as deposition material for SSAM would obtain superior mechanical properties to the rods and plates. In this study, gas-atomized AlMnMgScZr powder was used to produce bulk samples by friction rolling additive manufacturing (FRAM), and the densification behavior, microstructural evolution, and tensile properties of fabricated samples with different additive layer thicknesses ranging from 0.2 mm to 0.5 mm have been investigated. The results showed that the degree of powder bonding is improved, while the second phases formed in the FRAMed alloys become coarser by reducing the additive layer thickness. The FRAM process induces the dissolution of primary second-phase particles existing in the initial powder, meanwhile leading to the dynamic precipitation of Al 6 Mn and Al 3 Sc phases. The prior precipitation of Al 3 Sc particles plays a crucial role in inhibiting the coarsening of the Al 6 Mn phase. Tensile tests indicated that the additive layer thickness obviously influenced the strength and ductility of fabricated alloys due to the change in bonding quality and the evolution of the second phases. Both yield strength and ultimate tensile strength are decreased, while the elongation is initially increased and then decreased with decreasing additive layer thickness. The sample with the additive layer thickness of 0.3 mm exhibits a good combination of strength and ductility, in which the yield strength and elongation are 422 MPa and 18%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Aerospace Advanced Materials and Performance of Ministry of Education, School of Materials Science and Engineering, Beihang University, Beijing, China
Tianmushan Laboratory, Hangzhou, China
School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Funding
Key Research and Development Program of Zhejiang Province
References (31)
Show source-provided references
1. 10.1038/nature2389410.1038/nature23894 ↗
2. 10.1016/j.addma.2018.05.04710.1016/j.addma.2018.05.047 ↗
3. 10.1016/j.jmatprotec.2018.04.01410.1016/j.jmatprotec.2018.04.014 ↗
4. 10.1016/j.pmatsci.2019.10057810.1016/j.pmatsci.2019.100578 ↗
5. 10.3390/ma1607275710.3390/ma16072757 ↗
6. 10.1007/s10853-021-06761-w10.1007/s10853-021-06761-w ↗
7. 10.1016/j.optlastec.2024.11106010.1016/j.optlastec.2024.111060 ↗
8. 10.1016/j.jmrt.2023.02.03110.1016/j.jmrt.2023.02.031 ↗
9. 10.1016/j.msea.2022.14401010.1016/j.msea.2022.144010 ↗
10. 10.1016/j.msea.2022.14359710.1016/j.msea.2022.143597 ↗
11. 10.1080/10408436.2018.149025010.1080/10408436.2018.1490250 ↗
12. 10.1016/j.mtcomm.2021.10300510.1016/j.mtcomm.2021.103005 ↗
13. 10.1080/21663831.2020.184721110.1080/21663831.2020.1847211 ↗
14. 10.1016/j.msea.2018.03.08810.1016/j.msea.2018.03.088 ↗
15. 10.1016/j.matpr.2022.09.36610.1016/j.matpr.2022.09.366 ↗
16. 10.1016/j.jmatprotec.2023.11806110.1016/j.jmatprotec.2023.118061 ↗
17. Mukhopadhyay A, Saha P, Singh PK, et al. Development and analysis of a powder bed friction stir (PBFS) additive manufacturing process for aluminum alloys: a study on friction-stirring pitch (ω/v) and print location. Addit Manuf 2023; 72: 103618.
18. 10.1016/j.actamat.2019.04.01410.1016/j.actamat.2019.04.014 ↗
19. 10.1016/j.msea.2021.14203210.1016/j.msea.2021.142032 ↗
20. 10.1007/s10853-006-1425-510.1007/s10853-006-1425-5 ↗
21. 10.1007/s10853-017-1011-z10.1007/s10853-017-1011-z ↗
22. Turner DZ. Digital Image Correlation Engine (DICe) Reference Manual. 2015.
23. 10.1016/B978-012387582-2/50038-110.1016/B978-012387582-2/50038-1 ↗
24. 10.1023/A:102220141028210.1023/A:1022201410282 ↗
25. 10.1016/j.jmrt.2023.02.02910.1016/j.jmrt.2023.02.029 ↗
26. 10.1016/j.matchar.2010.10.00610.1016/j.matchar.2010.10.006 ↗
27. 10.1016/j.matchar.2013.09.01010.1016/j.matchar.2013.09.010 ↗
28. 10.1016/j.actamat.2023.11881910.1016/j.actamat.2023.118819 ↗
29. 10.1016/j.matchar.2021.11133110.1016/j.matchar.2021.111331 ↗
30. 10.1016/j.msea.2011.01.08210.1016/j.msea.2011.01.082 ↗
31. 10.1016/j.msea.2009.11.05610.1016/j.msea.2009.11.056 ↗