Design and development of cold rolled carbide free bainitic steel through microstructural engineering
Source abstract
Abstract
A cold rolled carbide-free bainitic steel primarily containing C, Mn, Si, Cr and Fe-balance has been developed. It was decided to have a fully pearlitic microstructure after casting and hot rolling to facilitate the subsequent cold rolling operation and finally the cold rolled strip would be transformed to carbide-free bainitic structure by suitable heat treatment. The composition was tailored through performing several virtual experiments in order to develop the desired microstructure. The developed steel achieved good combination of strength (900–1050 MPa YS, ∼1400–1650 MPa UTS) and elongation (∼13% uniform and ∼18% total elongation) in the final condition. Nano-structured bainitic plates (140–180 nm thick) and high dislocation density are the primary contributors to the strength whereas the carbon enriched retained austenite in optimum extent provided good elongation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
IIT Roorkee
Suresh Gyan Vihar University
IIT Kharagpur
Funding
Science and Engineering Research Board
References (47)
Show source-provided references
1. Bhadeshia HKDH. Bainite in Steels. 2nd ed. London: The Institute of Materials, 2001.
2. 10.1179/02670830122500072510.1179/026708301225000725 ↗
3. 10.1179/1743284711Y.000000011310.1179/1743284711Y.0000000113 ↗
4. 10.1007/s40195-013-0006-210.1007/s40195-013-0006-2 ↗
5. 10.1007/s11661-020-06119-y10.1007/s11661-020-06119-y ↗
6. 10.2355/isijinternational.40.90210.2355/isijinternational.40.902 ↗
7. 10.2355/isijinternational.42.45010.2355/isijinternational.42.450 ↗
8. 10.1007/s11661-017-4046-510.1007/s11661-017-4046-5 ↗
9. 10.2355/isijinternational.44.160810.2355/isijinternational.44.1608 ↗
10. 10.1080/02670836.2016.126866310.1080/02670836.2016.1268663 ↗
11. 10.1007/s11661-013-2173-110.1007/s11661-013-2173-1 ↗
12. 10.1515/amm-2017-034210.1515/amm-2017-0342 ↗
13. Das S Haldar A Kundu S. Bainitic steel of high strength and high elongation and method to manufacture said bainitic steel. US 11 345 983 B2; May 31 2022.
14. 10.1016/j.msea.2019.01.04310.1016/j.msea.2019.01.043 ↗
15. 10.1016/j.msea.2015.06.03410.1016/j.msea.2015.06.034 ↗
16. 10.1016/j.wear.2020.20335910.1016/j.wear.2020.203359 ↗
17. 10.1016/j.triboint.2020.10684610.1016/j.triboint.2020.106846 ↗
18. 10.1016/j.ijplas.2011.07.00810.1016/j.ijplas.2011.07.008 ↗
19. 10.31399/asm.tb.spsp2.978162708265510.31399/asm.tb.spsp2.9781627082655 ↗
20. 10.1080/14786435.2014.95683410.1080/14786435.2014.956834 ↗
21. Yadav S, Das S, Haldar A. Development of fully pearlitic microstructure in a hypoeutectoid steel. J Mater Eng Perform 2024: 1–8. doi:https://doi.org/10.1007/s11665-024-09488-2
22. 10.1080/02670836.2019.157352610.1080/02670836.2019.1573526 ↗
23. 10.1016/0001-6160(71)90133-710.1016/0001-6160(71)90133-7 ↗
24. 10.1179/03063458379042060010.1179/030634583790420600 ↗
25. 10.1179/03063458379042064610.1179/030634583790420646 ↗
26. 10.1007/BF0072071210.1007/BF00720712 ↗
27. 10.1016/j.scriptamat.2009.07.01310.1016/j.scriptamat.2009.07.013 ↗
28. 10.1007/s11661-013-2077-010.1007/s11661-013-2077-0 ↗
29. http://www.msm.cam.ac.uk/phase-trans/.
30. 10.1107/S002188989800985610.1107/S0021889898009856 ↗
31. Dyson DJ, Holmes B. Effect of alloying additions on lattice parameter of austenite. J Iron Steel Inst 1970; 208: 469–474.
32. 10.1016/B978-0-444-64062-8.00019-X10.1016/B978-0-444-64062-8.00019-X ↗
33. 10.1016/0001-6160(80)90082-610.1016/0001-6160(80)90082-6 ↗
34. 10.1016/j.msea.2011.11.09710.1016/j.msea.2011.11.097 ↗
35. 10.2355/isijinternational.40.114910.2355/isijinternational.40.1149 ↗
36. 10.1016/S0921-5093(97)00701-610.1016/S0921-5093(97)00701-6 ↗
37. 10.1007/s11661-017-4064-310.1007/s11661-017-4064-3 ↗
38. 10.1007/978-1-349-02595-410.1007/978-1-349-02595-4 ↗
39. Andrews KW. Empirical formulae for the calculation of some transformation temperatures. J Iron Steel Inst 1965; 203: 721–727.
40. 10.1063/1.11795110.1063/1.117951 ↗
41. 10.1016/0001-6160(82)90075-X10.1016/0001-6160(82)90075-X ↗
42. 10.1016/j.msea.2017.10.05010.1016/j.msea.2017.10.050 ↗
43. 10.1016/j.msea.2021.14186010.1016/j.msea.2021.141860 ↗
44. 10.1016/j.msea.2007.05.00710.1016/j.msea.2007.05.007 ↗
45. 10.1016/j.msea.2022.14317510.1016/j.msea.2022.143175 ↗
46. 10.1016/j.msea.2013.09.04810.1016/j.msea.2013.09.048 ↗
47. 10.1016/j.msea.2019.02.06210.1016/j.msea.2019.02.062 ↗