journal article·2026-06

Solidification structure transformation and strengthening of wire and arc additively manufactured Al-Cu alloy single wall multi-layered deposits

Atosh Kumar Sinha, Susanta Pramanik, Krishna P Yagati

Materials Science and Technology· Volume 42· Issue 9
Publisher page

Abstract

In the present study, Al-Cu WAAM deposits were fabricated under three conditions: powder free, with TiB 2 and TiC powder at the interlayer. After deposition, the deposits were solutionized at 530 °C for 90 min and artificially aged at 180 °C for 3 h. The effect of powder particle addition and post-processing heat treatment (PPHT) were investigated. Powder free specimens show non-uniform structures throughout the deposit. TiB 2 and TiC powders refined the non-uniform solidification structure and diminished it to an equiaxed structure. PPHT promotes precipitation of secondary phases, enhancing mechanical characteristics of the depsoits. As-deposited specimens had Ultimate Tensile Strength (UTS) values of 263 MPa (powder free), 322 MPa (TiB 2 ), and 314 MPa (TiC), whereas PPHT specimens had 465, 487, and 482 MPa.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology, Durgapur

References (47)

Show source-provided references
1. 10.1080/02670836.2023.224677210.1080/02670836.2023.2246772 ↗
2. 10.1080/02670836.2023.218715310.1080/02670836.2023.2187153 ↗
3. 10.1080/02670836.2022.208816210.1080/02670836.2022.2088162 ↗
4. 10.1080/02670836.2023.219476310.1080/02670836.2023.2194763 ↗
5. 10.1177/0267083623121298610.1177/02670836231212986 ↗
6. 10.1016/j.vacuum.2023.11217710.1016/j.vacuum.2023.112177 ↗
7. 10.1016/j.mtcomm.2024.10858210.1016/j.mtcomm.2024.108582 ↗
8. 10.1016/j.matchar.2020.11073510.1016/j.matchar.2020.110735 ↗
9. 10.1016/j.msea.2015.10.10110.1016/j.msea.2015.10.101 ↗
10. 10.1016/j.jmrt.2021.04.07610.1016/j.jmrt.2021.04.076 ↗
11. 10.1016/j.addma.2021.10245310.1016/j.addma.2021.102453 ↗
12. 10.1016/j.jmapro.2023.06.03210.1016/j.jmapro.2023.06.032 ↗
13. 10.1016/j.jmatprotec.2023.11814610.1016/j.jmatprotec.2023.118146 ↗
14. 10.1007/s11665-017-2627-510.1007/s11665-017-2627-5 ↗
15. 10.1016/j.jallcom.2023.17134510.1016/j.jallcom.2023.171345 ↗
16. 10.1016/j.addma.2018.06.01510.1016/j.addma.2018.06.015 ↗
17. 10.1016/j.jmatprotec.2019.03.02810.1016/j.jmatprotec.2019.03.028 ↗
18. 10.1016/j.matchar.2024.11367210.1016/j.matchar.2024.113672 ↗
19. 10.1016/j.jmst.2019.06.01610.1016/j.jmst.2019.06.016 ↗
20. 10.1016/j.apsusc.2019.04.25510.1016/j.apsusc.2019.04.255 ↗
21. 10.1007/s12046-023-02183-310.1007/s12046-023-02183-3 ↗
22. 10.3390/coatings1109114110.3390/coatings11091141 ↗
23. 10.1007/s12666-022-02857-210.1007/s12666-022-02857-2 ↗
24. 10.1007/s12633-023-02667-110.1007/s12633-023-02667-1 ↗
25. 10.1016/j.matlet.2019.01.11710.1016/j.matlet.2019.01.117 ↗
26. 10.1016/j.jmapro.2019.06.02610.1016/j.jmapro.2019.06.026 ↗
27. 10.1016/j.addlet.2023.10017210.1016/j.addlet.2023.100172 ↗
28. 10.1016/j.fuel.2023.12859910.1016/j.fuel.2023.128599 ↗
29. 10.3390/coatings1112144410.3390/coatings11121444 ↗
30. 10.1080/02670836.2020.182196410.1080/02670836.2020.1821964 ↗
31. 10.1016/j.jmrt.2023.08.09810.1016/j.jmrt.2023.08.098 ↗
32. 10.1016/j.vacuum.2023.11283710.1016/j.vacuum.2023.112837 ↗
33. Chen F, Yang Y, Feng H. Regional control and optimization of heat input during CMT by wire arc additive manufacturing: modeling and microstructure effects. Materials 2021; 14: 1–12.
34. 10.1016/j.msea.2020.14016810.1016/j.msea.2020.140168 ↗
35. 10.1080/13621718.2022.206470410.1080/13621718.2022.2064704 ↗
36. 10.1016/j.jmrt.2021.01.03010.1016/j.jmrt.2021.01.030 ↗
37. 10.1016/j.jmrt.2022.01.01410.1016/j.jmrt.2022.01.014 ↗
38. 10.1016/j.addma.2021.10199310.1016/j.addma.2021.101993 ↗
39. 10.3390/met1103052410.3390/met11030524 ↗
40. 10.1016/j.jallcom.2018.02.35310.1016/j.jallcom.2018.02.353 ↗
41. 10.1016/j.matdes.2022.11097410.1016/j.matdes.2022.110974 ↗
42. 10.1007/BF0113011710.1007/BF01130117 ↗
43. 10.3390/met910103710.3390/met9101037 ↗
44. 10.3390/nano908115210.3390/nano9081152 ↗
45. 10.1063/1.492240810.1063/1.4922408 ↗
46. 10.1016/j.jssc.2003.04.00810.1016/j.jssc.2003.04.008 ↗
47. 10.1016/j.surfcoat.2022.12880610.1016/j.surfcoat.2022.128806 ↗