journal article·2026-06

Enhanced mechanical performance of 0.13C-7Mn TRIP steel welds with optimized tempering

Yunming Zhu, Teng Liu, Yongqiang Zhou, Zhengqiang Zhu

Materials Science and Technology· Volume 42· Issue 9
Publisher page

Abstract

In response to the brittleness issues of 0.13C-7Mn TRIP steel welds, a heat treatment process with varying holding times was designed. This study investigates the effects of tempering on the microstructure and mechanical properties of the welds. After holding at 250 °C for 10, 20, and 30 min, the peak load in tensile shear tests increased by 89.6%, 104.8%, and 41.6%, respectively, compared to the samples that were not tempered. Furthermore, the failure mode transitioned from complete brittle interfacial fracture (IF) to more ductile modes, including partial interfacial fracture (PIF) and pull-out fracture (PF). After tempering, the martensite in the weld zone transforms into tempered martensite. The hardness of both the heat-affected zone and the fusion zone (FZ) decreased by approximately 20 HV, leading to a more uniform hardness distribution, leading to a more uniform hardness distribution. Additionally, the segregation of manganese (Mn) in the fusion zone is also mitigated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nanchang University

Jiangxi Provincial Key Laboratory of Robot and Welding Automation, Jiangxi, China

References (29)

Show source-provided references
1. 10.1016/S1644-9665(12)60197-610.1016/S1644-9665(12)60197-6 ↗
2. 10.1002/srin.20170021010.1002/srin.201700210 ↗
3. 10.1016/j.msea.2019.13846010.1016/j.msea.2019.138460 ↗
4. 10.1016/0921-5093(93)90463-O10.1016/0921-5093(93)90463-O ↗
5. 10.1007/s11665-019-04020-310.1007/s11665-019-04020-3 ↗
6. 10.5781/JWJ.2021.39.3.210.5781/JWJ.2021.39.3.2 ↗
7. 10.1007/s11665-021-05787-010.1007/s11665-021-05787-0 ↗
8. 10.1007/s13296-021-00464-310.1007/s13296-021-00464-3 ↗
9. 10.1016/j.msea.2012.11.11310.1016/j.msea.2012.11.113 ↗
10. 10.1016/j.msea.2010.07.09110.1016/j.msea.2010.07.091 ↗
11. 10.1007/s11663-018-1463-910.1007/s11663-018-1463-9 ↗
12. Qiang J, Lei L, Wei G, et al. Microstructure and Tensile-Shear properties of resistance spot-welded medium Mn steel. Metals 2018; 8.
13. 10.1016/j.msea.2019.03.02310.1016/j.msea.2019.03.023 ↗
14. 10.1016/j.msea.2020.13947710.1016/j.msea.2020.139477 ↗
15. Speer JG, Streicher AM, Matlock DK, et al. Quenching and partitioning: a fundamentally new process to create high strength trip sheet microstructures. In: Symposium on the thermodynamics, kinetics, characterization and modeling of: austenite formation and decomposition, 2003, pp.505–522.
16. 10.1016/j.scriptamat.2007.09.01710.1016/j.scriptamat.2007.09.017 ↗
17. 10.1016/S0924-0136(01)00625-210.1016/S0924-0136(01)00625-2 ↗
18. 10.1016/j.msea.2017.07.06710.1016/j.msea.2017.07.067 ↗
19. 10.3389/fmats.2023.113540710.3389/fmats.2023.1135407 ↗
20. Wang Y, Ding K, Zhao B, et al. Effect of the cooling time on the cross tensile strength of the resistance spot welded medium manganese steel. In: TMS 2020 149th annual meeting & exhibition supplemental proceedings, 2020, pp.515–523. Cham: Springer.
21. 10.2478/v10172-012-0152-y10.2478/v10172-012-0152-y ↗
22. 10.1007/s11661-011-0739-310.1007/s11661-011-0739-3 ↗
23. 10.1016/j.jmapro.2018.01.00910.1016/j.jmapro.2018.01.009 ↗
24. 10.1007/s10853-009-4141-010.1007/s10853-009-4141-0 ↗
25. 10.1016/j.optlastec.2023.10941010.1016/j.optlastec.2023.109410 ↗
26. 10.1016/j.matdes.2024.11338310.1016/j.matdes.2024.113383 ↗
27. 10.2351/1.505787010.2351/1.5057870 ↗
28. 10.1016/j.matchemphys.2014.03.01910.1016/j.matchemphys.2014.03.019 ↗
29. 10.1016/j.msea.2019.13854510.1016/j.msea.2019.138545 ↗