journal article·2026-05

Mechanical behaviour of dual-phase SS301 under cryogenic conditions

Antony Prabhu T, Rutujeet Suryawanshi, Sudhakar DP, PG Kubendran Amos

Materials Science and Technology· Volume 42· Issue 7
Publisher page

Abstract

The present work is the first comprehensive investigation of the cryogenic behaviour of dual-phase SS301 stainless steel over an extensive temperature range, including 20 K, 30 K, 40 K, 77 K, 120 K, 150 K, 170 K, and 300 K. The range of temperature involved in this study renders critical insights on the temperature sensitivity of the mechanical properties of SS301, such as yield strength, and ultimate tensile strength. This work notably unravels that the ductility and toughness of dual-phase SS301 remain largely unchanged between cryogenic and room temperatures owing to the similar level strain-induced transformation of martensite, and the resulting comparable phase-fractions. Furthermore, in addition to the two-stage serrations which are generally observed in discontinuous plastic-deformation, the present investigation reveals that the yield at 40 K accommodates four-stage serrations. However, interestingly, the four-stage of the serrations at 40 K progressively transition into two-stages as the deformation proceeds. Ultimately, the current work elucidates the mechanical behavior of dual-phase SS301 at cryogenic temperatures, in contrast to the more commonly analyzed austenitic stainless steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

ISRO Propulsion Complex

Department of Metallurgical and Materials Engineering National Institute of Technology

References (38)

Show source-provided references
1. Li LF Zhang YT Li YY. Development of cryogenic structural materials. In: Proceedings of the twentieth international cryogenic engineering conference (ICEC20) 2005 pp.885–894. Elsevier.10.1016/B978-008044559-5/50213-1 ↗
2. Cadwallader LC. Cryogenic system operating experience review for fusion applications. Technical report EG and G Idaho Inc. Idaho Falls ID (United States) 1992.
3. 10.1016/S0011-2275(01)00035-210.1016/S0011-2275(01)00035-2 ↗
4. Klem MD Smith TD Wadel MF et al. Liquid oxygen/liquid methane propulsion and cryogenic advanced development. In: 62nd International aeronautical congress number E-17931 2011.
5. 10.1038/scientificamerican1086-6610.1038/scientificamerican1086-66 ↗
6. 10.1557/mrs.2015.27810.1557/mrs.2015.278 ↗
7. 10.1007/s10894-008-9136-310.1007/s10894-008-9136-3 ↗
8. 10.1007/978-1-4757-9050-4_1410.1007/978-1-4757-9050-4_14 ↗
9. 10.1520/MPC2020019310.1520/MPC20200193 ↗
10. 10.1016/j.cryogenics.2017.02.00110.1016/j.cryogenics.2017.02.001 ↗
11. Basinski ZS. The instability of plastic flow of metals at very low temperatures. Proc R Soc Lond A Math Phys Sci 1957; 240: 229–242.
12. Reed RP Simon NJ. Discontinuous yielding in austenitic steels at low temperatures. In: International cryogenic material conference Boulder vol. 2. 1988 pp.851–863.
13. 10.1016/S1359-6454(96)00227-310.1016/S1359-6454(96)00227-3 ↗
14. 10.1016/j.euromechsol.2005.10.00710.1016/j.euromechsol.2005.10.007 ↗
15. 10.1002/1521-3951(199702)199:2<267::AID-PSSB267>3.0.CO;2-Q10.1002/1521-3951(199702)199:2<267::AID-PSSB267>3.0.CO;2-Q ↗
16. 10.1016/0921-5093(91)90328-K10.1016/0921-5093(91)90328-K ↗
17. 10.1115/1.150948510.1115/1.1509485 ↗
18. 10.1016/j.matdes.2009.03.04310.1016/j.matdes.2009.03.043 ↗
19. 10.1007/s11661-009-9916-z10.1007/s11661-009-9916-z ↗
20. Klueh RL, Ehrlich K, Abe F. Ferritic/martensitic steels: promises and problems. J Nucl Mater 1992; 191: 116–124.
21. 10.1016/j.matchar.2018.02.02810.1016/j.matchar.2018.02.028 ↗
22. Magadum S Kumar A Srinivasa C. Cryogenic machining of SS304 steel. In: Proceedings of the 5th international & 26th all India manufacturing technology Guwahati India 2014 pp.12–14.10.1016/j.mspro.2014.07.506 ↗
23. Yadav B Samadhiya A. Thermo-mechanical analysis of alloys for cryogenics fuel tank applications.
24. Upadhyay J Bansal A Singh J. Effect on mechanical and metallurgical properties of cryogenically treated material SS316. In: Manufacturing engineering: select proceedings of CPIE 2018 2019 pp.97–107. Springer.10.1007/978-981-13-6287-3_7 ↗
25. 10.1088/2053-1591/acbe2710.1088/2053-1591/acbe27 ↗
26. 10.3390/ma1419585610.3390/ma14195856 ↗
27. Kim K. The influence of temperature and strain rate on texture evolution in AISI 301 austenitic stainless steel. Nashville, Tennessee: Vanderbilt University, 1995.
28. 10.1007/BF0055043410.1007/BF00550434 ↗
29. 10.1016/j.actamat.2013.11.00710.1016/j.actamat.2013.11.007 ↗
30. 10.1007/s11661-018-4887-610.1007/s11661-018-4887-6 ↗
31. 10.1016/j.cryogenics.2020.10305810.1016/j.cryogenics.2020.103058 ↗
32. 10.1016/j.jnucmat.2018.03.01910.1016/j.jnucmat.2018.03.019 ↗
33. Obst B Nyilas A. Time-resolved flow stress behaviour of structural materials at low temperatures. In: Advances in cryogenic engineering materials. Springer 1998 pp.331–338.10.1007/978-1-4757-9056-6_44 ↗
34. 10.1016/j.ijplas.2010.02.00310.1016/j.ijplas.2010.02.003 ↗
35. 10.1016/S0301-679X(01)00006-810.1016/S0301-679X(01)00006-8 ↗
36. 10.1080/02670836.2018.151107610.1080/02670836.2018.1511076 ↗
37. 10.1016/j.matchar.2017.09.02710.1016/j.matchar.2017.09.027 ↗
38. 10.1016/j.engfracmech.2021.10804210.1016/j.engfracmech.2021.108042 ↗