journal article·2026-03

Characterization of Ti-48Al-2Cr fabricated by multi-wire arc additive manufacturing: Microstructure, mechanical, and oxidation resistance properties

Ze Li, Zhiyong Li, Jieliang Ren, Haiwu Zhou, Yingqiao Zhang, Shouzheng Wei, Yichuan Zhang, Fuqiang Liu

Materials Science and Technology· Volume 42· Issue 4
Publisher page

Abstract

Utilizing a multi-wire arc additive manufacturing process applied with high-frequency induction heating wire technology (MWAAM-HF) proposed in this study, Ti-48Al-2Cr alloy straight-walled component was fabricated. During the MWAAM-HF process, three types of wires melt simultaneously and transfer smoothly into the weld pool to form satisfactory component without discernible cracks. The upper and lower regions have higher hardness compared to the middle region in both Z and Y direction. Along the Y direction, the upper region exhibited the highest UTS and YS, while the minimum values were observed along the Z direction. Superior wear resistance was observed in the upper and lower regions. Distinct regions exhibited different levels of high-temperature oxidation resistance and the upper region has superior high-temperature oxidation resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

North University of China

Funding

Shanxi Provincial Key Research and Development Project · National Natural Science Foundation of China

References (45)

Show source-provided references
1. 10.3139/147.11036610.3139/147.110366 ↗
2. 10.1016/j.intermet.2021.10710910.1016/j.intermet.2021.107109 ↗
3. 10.1016/j.jmapro.2021.11.03910.1016/j.jmapro.2021.11.039 ↗
4. 10.1080/02670836.2021.194816910.1080/02670836.2021.1948169 ↗
5. 10.1016/j.msea.2018.07.09710.1016/j.msea.2018.07.097 ↗
6. 10.1016/j.jmrt.2022.07.07010.1016/j.jmrt.2022.07.070 ↗
7. 10.1080/02670836.2022.206825910.1080/02670836.2022.2068259 ↗
8. 10.1080/09603409.2016.118306810.1080/09603409.2016.1183068 ↗
9. 10.1016/j.jallcom.2022.16726210.1016/j.jallcom.2022.167262 ↗
10. Dzogbewu TC. Additive manufacturing of TiAl-based alloys. Manuf Rev (Les Ulis) 2020; 7: 35.
11. 10.1007/s10853-022-06896-410.1007/s10853-022-06896-4 ↗
12. Pan Z Ding D Wu B et al. Arc welding processes for additive manufacturing: a review. In: 2018 pp.3–24. https://doi.org/10.1007/978-981-10-5355-9_1.10.1007/978-981-10-5355-9_1 ↗
13. 10.3390/met905057810.3390/met9050578 ↗
14. 10.1016/j.jmrt.2023.03.20010.1016/j.jmrt.2023.03.200 ↗
15. 10.1016/j.jmatprotec.2016.11.02710.1016/j.jmatprotec.2016.11.027 ↗
16. 10.1115/1.404794710.1115/1.4047947 ↗
17. 10.1016/j.msea.2021.14105610.1016/j.msea.2021.141056 ↗
18. 10.1016/j.ijheatmasstransfer.2018.11.10810.1016/j.ijheatmasstransfer.2018.11.108 ↗
19. 10.1016/j.msea.2021.14200810.1016/j.msea.2021.142008 ↗
20. 10.1016/j.matlet.2019.01.11210.1016/j.matlet.2019.01.112 ↗
21. Cai X, Dong B, Yin X, et al. Wire arc additive manufacturing of titanium aluminide alloys using two-wire TOP-TIG welding: processing, microstructures, and mechanical properties. Addit Manuf 2020; 35: 101344.
22. 10.1016/j.jmatprotec.2020.11661510.1016/j.jmatprotec.2020.116615 ↗
23. 10.1016/j.ijheatmasstransfer.2020.11953610.1016/j.ijheatmasstransfer.2020.119536 ↗
24. 10.1007/BF0285135510.1007/BF02851355 ↗
25. 10.1007/BF0265681010.1007/BF02656810 ↗
26. 10.1016/j.msea.2016.01.06010.1016/j.msea.2016.01.060 ↗
27. 10.1016/j.msea.2015.02.05110.1016/j.msea.2015.02.051 ↗
28. 10.1016/j.msea.2022.14301110.1016/j.msea.2022.143011 ↗
29. 10.1016/j.jallcom.2013.03.24310.1016/j.jallcom.2013.03.243 ↗
30. 10.1016/j.intermet.2008.03.00910.1016/j.intermet.2008.03.009 ↗
31. 10.1002/adem.20060015310.1002/adem.200600153 ↗
32. 10.1016/1359-6462(96)00097-810.1016/1359-6462(96)00097-8 ↗
33. 10.1016/j.intermet.2011.10.00310.1016/j.intermet.2011.10.003 ↗
34. 10.1016/S1359-6454(00)00375-X10.1016/S1359-6454(00)00375-X ↗
35. 10.1016/j.cossms.2014.07.00310.1016/j.cossms.2014.07.003 ↗
36. 10.1007/s11661-998-0157-310.1007/s11661-998-0157-3 ↗
37. 10.1016/j.paerosci.2012.04.00110.1016/j.paerosci.2012.04.001 ↗
38. 10.1016/j.intermet.2017.09.00410.1016/j.intermet.2017.09.004 ↗
39. Zhai W, Bai L, Zhou R, et al. Recent progress on wear-resistant materials: Designs. Properties Appl Adv Sci 2021; 8. https://doi.org/10.1002/advs.202003739
40. 10.1016/j.triboint.2018.11.02510.1016/j.triboint.2018.11.025 ↗
41. 10.1590/S0103-6440200700010001310.1590/S0103-64402007000100013 ↗
42. 10.1016/j.wear.2015.03.02210.1016/j.wear.2015.03.022 ↗
43. 10.1016/j.wear.2020.20326310.1016/j.wear.2020.203263 ↗
44. 10.1016/j.corsci.2017.12.01310.1016/j.corsci.2017.12.013 ↗
45. 10.2320/matertrans1989.34.23610.2320/matertrans1989.34.236 ↗