Effect of MnO 2 addition on the microstructure and properties of high-volume fraction SiC p /Al composites fabricated by pressureless melt infiltration
Source abstract
Abstract
High-volume fraction silicon carbide particles reinforced aluminum matrix composites (SiCp/Al) with low coefficient of thermal expansion (CTE) and high thermal conductivity (TC) were fabricated by infiltrating Al-Si-Mg alloy in air atmosphere without pressure into porous SiC preforms doped with different manganese dioxide (MnO 2 ) content in order to investigate the effectiveness of MnO 2 as infiltration aid. The effect of MnO 2 on the infiltration time, microstructure and thermo-mechanical properties of the composite materials were studied. The volume ratio of SiC to MnO 2 was set at 100:0, 100:5, 100:10 & 100:15 respectively. Obtained results showed the effectiveness of MnO 2 as infiltration aid as the infiltration time was significantly reduced, the wetting between SiC and Al and interfacial bonding strength were considerably improved with the addition of MnO 2 . Harmful and brittle aluminum carbide (Al 4 C 3 ) was not detected at the interface of the Al alloy and SiC ceramic phase. The composites with 100:15 MnO 2 and 100:10 MnO 2 content were found to have less incubation period and infiltration time. Optimum dispersion of SiC particles in the Al alloy and better properties were obtained with 100:10 MnO 2 content composite samples. The properties are; a coefficient of thermal expansion (RT to 473 K) of 9.3 × 10 −6 K −1 , a thermal conductivity of 200.5 W/(mK), a hardness of 145.2 HBW and a bending strength of 338.0 MPa.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kunming University of Science and Technology
National-Local Joint Engineering Research Center for Technology of Advanced Metallic Solidification Forming and Equipment, Kunming, China
Funding
Yunnan Province Science and Technology Department, Yunnan Major Scientific and Technological Projects
References (60)
Show source-provided references
1. 10.1016/j.msea.2007.07.02610.1016/j.msea.2007.07.026 ↗
2. 10.1016/j.matchar.2013.08.01410.1016/j.matchar.2013.08.014 ↗
3. 10.1016/j.ceramint.2011.04.13010.1016/j.ceramint.2011.04.130 ↗
4. Geng L, Wu K. Metal matrix composites. ComposMater Eng 2018; 2: 305–487.
5. 10.1016/B978-0-12-803581-8.11890-910.1016/B978-0-12-803581-8.11890-9 ↗
6. 10.1007/s11837-022-05308-x10.1007/s11837-022-05308-x ↗
7. Yanlei P, Chengchang J, Xuanhui Q, et al. Preparation of SiCp/Al electronic packaging composite preforms. Chin J Eng 2004; 26: 301–329.
8. 10.1016/S1003-6326(16)64358-310.1016/S1003-6326(16)64358-3 ↗
9. 10.1016/j.scriptamat.2006.02.05110.1016/j.scriptamat.2006.02.051 ↗
10. 10.1016/j.jallcom.2009.04.07410.1016/j.jallcom.2009.04.074 ↗
11. 10.1016/j.jallcom.2007.10.05510.1016/j.jallcom.2007.10.055 ↗
12. 10.1016/j.matdes.2007.01.00710.1016/j.matdes.2007.01.007 ↗
13. 10.1016/j.matdes.2004.10.01610.1016/j.matdes.2004.10.016 ↗
14. 10.1016/S1359-835X(03)00253-710.1016/S1359-835X(03)00253-7 ↗
15. 10.1016/j.matdes.2009.03.00910.1016/j.matdes.2009.03.009 ↗
16. 10.1016/j.ceramint.2008.10.02410.1016/j.ceramint.2008.10.024 ↗
17. 10.1016/j.matlet.2006.01.02710.1016/j.matlet.2006.01.027 ↗
18. 10.1016/j.msea.2006.08.05610.1016/j.msea.2006.08.056 ↗
19. 10.1016/S0924-0136(01)00919-010.1016/S0924-0136(01)00919-0 ↗
20. 10.1016/S0924-0136(01)00975-X10.1016/S0924-0136(01)00975-X ↗
21. 10.1016/j.scriptamat.2005.01.03610.1016/j.scriptamat.2005.01.036 ↗
22. 10.1179/1743284712Y.000000015210.1179/1743284712Y.0000000152 ↗
23. 10.1007/s11661-000-0291-z10.1007/s11661-000-0291-z ↗
24. 10.1016/S1002-0071(12)60029-X10.1016/S1002-0071(12)60029-X ↗
25. 10.1016/j.compositesb.2012.02.00410.1016/j.compositesb.2012.02.004 ↗
26. 10.1016/j.compscitech.2004.01.01010.1016/j.compscitech.2004.01.010 ↗
27. 10.1016/j.jallcom.2007.01.12710.1016/j.jallcom.2007.01.127 ↗
28. 10.1016/j.actamat.2005.08.02210.1016/j.actamat.2005.08.022 ↗
29. 10.1016/j.ceramint.2018.03.01610.1016/j.ceramint.2018.03.016 ↗
30. 10.3390/ma1707160810.3390/ma17071608 ↗
31. 10.1016/0956-716X(93)90277-Y10.1016/0956-716X(93)90277-Y ↗
32. 10.1016/j.ceramint.2019.10.21610.1016/j.ceramint.2019.10.216 ↗
33. 10.1016/j.ceramint.2019.09.04010.1016/j.ceramint.2019.09.040 ↗
34. 10.1007/BF0335546910.1007/BF03355469 ↗
35. Yu Y Du A Zhao X et al. Effect of Ti addition on the microstructure and mechanical properties of SiC matrix composites infiltrated by Al-Si (10wt.%)-xTi Alloy. LID - 10.3390/ma12020318 [doi] LID - 318.10.3390/ma12020318 ↗
36. 10.1007/BF0238561310.1007/BF02385613 ↗
37. 10.1088/1755-1315/446/2/02202410.1088/1755-1315/446/2/022024 ↗
38. 10.1016/S0924-0136(00)00664-610.1016/S0924-0136(00)00664-6 ↗
39. 10.1016/j.jallcom.2008.01.02210.1016/j.jallcom.2008.01.022 ↗
40. 10.1016/j.jmrt.2023.05.11810.1016/j.jmrt.2023.05.118 ↗
41. 10.1016/B978-1-4377-7889-2.10007-510.1016/B978-1-4377-7889-2.10007-5 ↗
42. 10.1016/S0167-577X(02)01142-410.1016/S0167-577X(02)01142-4 ↗
43. 10.1016/j.ceramint.2016.10.10410.1016/j.ceramint.2016.10.104 ↗
44. 10.1016/j.ceramint.2012.11.08210.1016/j.ceramint.2012.11.082 ↗
45. 10.1016/j.jmatprotec.2006.10.02910.1016/j.jmatprotec.2006.10.029 ↗
46. 10.1016/S1875-5372(15)30066-710.1016/S1875-5372(15)30066-7 ↗
47. 10.1007/BF0264732510.1007/BF02647325 ↗
48. 10.1016/j.cossms.2006.02.00510.1016/j.cossms.2006.02.005 ↗
49. 10.1142/S179360471950007310.1142/S1793604719500073 ↗
50. 10.1016/j.mssp.2013.08.00910.1016/j.mssp.2013.08.009 ↗
51. 10.1080/10667857.2019.170230910.1080/10667857.2019.1702309 ↗
52. 10.1016/j.ceramint.2013.12.10510.1016/j.ceramint.2013.12.105 ↗
53. 10.1016/j.compscitech.2011.01.02010.1016/j.compscitech.2011.01.020 ↗
54. 10.1007/978-1-4419-8164-610.1007/978-1-4419-8164-6 ↗
55. 10.1063/1.35930210.1063/1.359302 ↗
56. 10.1016/j.matdes.2012.09.02710.1016/j.matdes.2012.09.027 ↗
57. 10.1016/j.matdes.2012.09.00610.1016/j.matdes.2012.09.006 ↗
58. 10.1016/S1875-5372(10)60059-810.1016/S1875-5372(10)60059-8 ↗
59. 10.1016/j.msea.2006.11.08810.1016/j.msea.2006.11.088 ↗
60. 10.1016/j.proeng.2014.11.82110.1016/j.proeng.2014.11.821 ↗