The microstructure evolution and mechanical properties of Ti–1300 alloy during ECAP deformation and subsequent aging treatment
Source abstract
Abstract
The effect of Equal channel angular pressing (ECAP) deformation on the microstructure, mechanical properties, and aging behavior of solution treated Ti–1300 alloy was investigated. The results show that the grains are not broken during ECAP deformation due to coordination of grain rotation. The dominant deformation mechanism involved dislocation slip and twinning. The ECAP deformation has a significant effect on the subsequent aging behavior. The microstructure of aged samples comprised α s phase in β matrix. The precipitation of α s phase in the pre-deformed sample is higher than that in the solution treated sample, which is reflected in the improvement of microhardness of the pre-deformed + aging sample. The microhardness of the alloy after ECAP deformation increases with decreasing aging temperature and increasing aging time.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an University of Architecture and Technology
National Experimental Teaching Demonstration Center of Metallurgical Technology, Xi’an, China
Funding
National Natural Science Foundation of China · Natural Science Foundation of Shaanxi Province
References (27)
Show source-provided references
1. 10.1016/j.jmatprotec.2006.04.02210.1016/j.jmatprotec.2006.04.022 ↗
2. Wen J, Ge P, Yang G, et al. Effect of heat treatment process on microstructure and tensile properties of ti-1300 alloy. Rare Metal Mater Eng 2009; 38: 1490–1494.
3. 10.1016/j.msea.2014.03.01610.1016/j.msea.2014.03.016 ↗
4. 10.1016/j.jallcom.2015.02.22210.1016/j.jallcom.2015.02.222 ↗
5. 10.1016/j.msea.2014.10.07210.1016/j.msea.2014.10.072 ↗
6. 10.1016/S1000-9361(08)60137-510.1016/S1000-9361(08)60137-5 ↗
7. 10.1007/s12598-015-0472-y10.1007/s12598-015-0472-y ↗
8. 10.1016/j.jallcom.2019.06.26610.1016/j.jallcom.2019.06.266 ↗
9. 10.1016/j.jallcom.2017.08.23910.1016/j.jallcom.2017.08.239 ↗
10. 10.1016/j.msea.2010.12.06810.1016/j.msea.2010.12.068 ↗
11. 10.1016/j.msea.2013.09.05210.1016/j.msea.2013.09.052 ↗
12. 10.1007/s11665-016-2385-910.1007/s11665-016-2385-9 ↗
13. 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
14. 10.1080/02670836.2018.147848110.1080/02670836.2018.1478481 ↗
15. 10.1016/j.msea.2021.14155710.1016/j.msea.2021.141557 ↗
16. 10.1016/j.jallcom.2014.09.06410.1016/j.jallcom.2014.09.064 ↗
17. 10.1016/j.jallcom.2016.12.00610.1016/j.jallcom.2016.12.006 ↗
18. 10.1016/j.jallcom.2016.04.29310.1016/j.jallcom.2016.04.293 ↗
19. 10.1016/j.matchar.2019.10982710.1016/j.matchar.2019.109827 ↗
20. 10.1016/j.msea.2018.11.04510.1016/j.msea.2018.11.045 ↗
21. 10.1016/j.msea.2017.02.08210.1016/j.msea.2017.02.082 ↗
22. 10.1016/j.jma.2019.11.01210.1016/j.jma.2019.11.012 ↗
23. 10.1080/21663831.2022.202977910.1080/21663831.2022.2029779 ↗
24. Huang S, Li J, Meng Y, et al. Grain refinement mechanism of V-5Cr-5Ti alloy based on equal channel angular pressing. Rare Metal Mater Eng 2016; 45: 2313–2316.
25. 10.1007/s10853-013-7140-010.1007/s10853-013-7140-0 ↗
26. 10.1016/j.jallcom.2015.07.26310.1016/j.jallcom.2015.07.263 ↗
27. 10.1017/S088571560001325710.1017/S0885715600013257 ↗