journal article·2025-10

Coarsening of alloy carbides during a cyclic heat treatment for grain refinement in ultrahigh-strength steels

C. Xu, M. J. Tu, X. G. Chen, C. J. He, X. B. Jia, W. B. Guo, J. M. Liu, L. Liu, Y. Chen

Materials Science and Technology· Volume 41· Issue 15
Publisher page

Abstract

Strength–ductility trade-off dilemma is acute in materials science, especially for ultrahigh-strength steels. The improvement of toughness requires careful tuning of grains and precipitates. Thermal cyclic treatment and annealing before quenching are two effective ways of microstructural refinement for steels. However, a combination of the two methods has never been studied. Complex alloy carbides form in the process of annealing, but their effects on grain refinement in the subsequent quenching are unclear. Here, a systematic comparison of microstructure and mechanical properties is established between a thermal cyclic treatment with annealing (CHT) and traditional quench-temper treatment (QT). The results indicate that the CHT treatment leads to the coarsening of alloy carbides and subgrains, and the decrease in strength and toughness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Inner Mongolia North Heavy Industries Group Corporation Limited, Inner Mongolia, 014000, China

MIIT Key Laboratory of Advanced Metallic and Intermetallic Materials Technology, Engineering Research Center of Materials Behavior and Design, Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094, China

Funding

Inner Mongolia Program of Grassland & Talents

References (27)

Show source-provided references
1. 10.2355/isijinternational.41.59910.2355/isijinternational.41.599 ↗
2. 10.1126/science.115899410.1126/science.1158994 ↗
3. 10.1007/s12239-009-0082-510.1007/s12239-009-0082-5 ↗
4. 10.1016/j.matdes.2012.06.01710.1016/j.matdes.2012.06.017 ↗
5. 10.1016/j.scriptamat.2008.11.04110.1016/j.scriptamat.2008.11.041 ↗
6. 10.1007/s12540-018-0171-y10.1007/s12540-018-0171-y ↗
7. 10.1016/j.matchemphys.2013.10.00610.1016/j.matchemphys.2013.10.006 ↗
8. 10.1016/j.matchemphys.2010.02.05810.1016/j.matchemphys.2010.02.058 ↗
9. 10.1016/j.vacuum.2021.11070910.1016/j.vacuum.2021.110709 ↗
10. 10.1016/j.matchar.2020.11061210.1016/j.matchar.2020.110612 ↗
11. 10.1016/j.pmatsci.2020.10076410.1016/j.pmatsci.2020.100764 ↗
12. 10.1179/174328409X45325310.1179/174328409X453253 ↗
13. 10.1080/02670836.2018.147074610.1080/02670836.2018.1470746 ↗
14. 10.1016/S1359-6454(02)00577-310.1016/S1359-6454(02)00577-3 ↗
15. 10.1007/s11661-005-0002-x10.1007/s11661-005-0002-x ↗
16. 10.2320/matertrans.46.281710.2320/matertrans.46.2817 ↗
17. 10.1007/s11661-019-05295-w10.1007/s11661-019-05295-w ↗
18. 10.1016/0956-716X(94)90450-210.1016/0956-716X(94)90450-2 ↗
19. 10.1016/j.scriptamat.2011.10.04710.1016/j.scriptamat.2011.10.047 ↗
20. 10.1016/j.actamat.2004.06.02410.1016/j.actamat.2004.06.024 ↗
21. Wagner R Kampmann R Voorhees PW. Homogeneous Second-Phase Precipitation. Wiley-VCH Verlag GmbH & Co. KGaA Weinheim FRG 2005 pp. 309–407.10.1002/352760264X.ch5 ↗
22. 10.1016/0036-9748(71)90191-810.1016/0036-9748(71)90191-8 ↗
23. 10.1016/S1359-6454(00)00389-X10.1016/S1359-6454(00)00389-X ↗
24. 10.1080/0141861850823764510.1080/01418618508237645 ↗
25. 10.1016/j.msea.2010.01.03310.1016/j.msea.2010.01.033 ↗
26. 10.1016/j.actamat.2011.05.01210.1016/j.actamat.2011.05.012 ↗
27. 10.1016/j.msea.2012.11.01910.1016/j.msea.2012.11.019 ↗