Effect of stress-relief heat treatment on the stress-rupture properties of a nickel-based superalloy manufactured by laser powder bed fusion
Source abstract
Abstract
Residual stress is a ubiquitous phenomenon in laser powder bed fusion (LPBF) metal parts due to high temperature gradients and uneven heating during building processes. Subsequent stress-relief (SR) heat treatment is usually conducted to reduce the geometrical distortion and microscopic cracks induced by residual stress after the LPBF process. Using electron microscopy, X-ray diffraction, and stress-rupture tests, the experimental results revealed that the stress-rupture life of a nickel-based superalloy, IN625 alloy, subjected to SR treatment at 870°C and 980°C is inferior to that of the as-built (AB) alloy. The fundamental cause for this phenomenon is that more δ phase precipitates in the grains of the AB alloy during the stress-rupture test at 750°C/230 MPa, resulting in an increased dispersion hardening effect and a decreased ductility. Furthermore, the Laves and δ phases along grain boundaries in the SR treated alloys are more likely to coarsen, which is the second reason for the decreased stress-rupture life of the SR treated alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanghai University of Engineering Science
Chinese Academy of Sciences, Shenyang
Shandong University
Funding
Class III Peak Discipline of Shanghai—Materials Science and Engineering
References (35)
Show source-provided references
1. 10.1179/1743280411Y.000000001410.1179/1743280411Y.0000000014 ↗
2. 10.1016/j.jmapro.2016.12.01810.1016/j.jmapro.2016.12.018 ↗
3. 10.1007/s11661-014-2256-710.1007/s11661-014-2256-7 ↗
4. 10.1080/1478643041000166324010.1080/14786430410001663240 ↗
5. 10.1016/j.mtla.2021.10102110.1016/j.mtla.2021.101021 ↗
6. 10.1016/j.ijfatigue.2022.10678410.1016/j.ijfatigue.2022.106784 ↗
7. 10.1016/j.jallcom.2019.04.12910.1016/j.jallcom.2019.04.129 ↗
8. 10.1007/s00170-016-9335-410.1007/s00170-016-9335-4 ↗
9. Yang Q, Huang F, Li D. Research status and development trend of laser additive manufacturing technology. Aviation Precision Manufacturing Technology 2016; 12: 26–31.
10. 10.1016/j.apsusc.2008.07.15410.1016/j.apsusc.2008.07.154 ↗
11. Chen X, Zhao G, Dong D, et al. Microstructure and mechanical properties of Inconel625 superalloy fabricated by selective Laser melting. Chin J Lasers 2019; 46: 70–78.
12. Kreitcberg A, Brailovski V, Turenne S. Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion. Mater Sci Eng A 2017; 689: 1–10.10.1016/j.msea.2017.02.038 ↗
13. 10.3390/ma1615538210.3390/ma16155382 ↗
14. Zhou F, Hu X, Zhou Y, et al. Effects of post-heat treatment on anisotropic mechanical properties of laser additively manufactured IN718. Mater Sci Eng A 2023; 877: 145144.10.1016/j.msea.2023.145144 ↗
15. 10.1016/j.msea.2022.14379410.1016/j.msea.2022.143794 ↗
16. 10.1007/s11661-017-4304-610.1007/s11661-017-4304-6 ↗
17. Cheng W, Sun Y, Ma R, et al. The precipitation behavior effect of δ and γ” phases on mechanical properties of laser powder bed fusion Inconel 718 alloy. Mater Charact 2022; 194: 112456.10.1016/j.matchar.2022.112456 ↗
18. 10.1016/j.msea.2019.13832710.1016/j.msea.2019.138327 ↗
19. 10.1016/j.msea.2018.02.09310.1016/j.msea.2018.02.093 ↗
20. Stoudt MR, Lass EA, Ng DS, et al. The influence of annealing temperature and time on the formation of δ -Phase in additively-manufactured Inconel 625. Metall Mater Trans A 2018; 49: 3028–3037.10.1007/s11661-018-4643-y ↗
21. Lv Y, Xu F, Liu Y, et al. Effect of solution temperature on the microstructure of Inconel 625 alloy fabricated by PAW rapid prototyping. Mater Sci Technol 2013; 21: 14–19.
22. Song Z, Gao S, Wang Z, et al. Effects of non-equilibrium microstructures on microstructure evolution and mechanical properties of laser powder bed fusion IN625 Ni-based superalloy during long-term thermal exposure at 700 °C and 750 °C. Mater Sci Eng A 2022; 856: 143883.10.1016/j.msea.2022.143883 ↗
23. 10.1016/j.jmrt.2020.06.06110.1016/j.jmrt.2020.06.061 ↗
24. Xu F, Xu B, Lv Y. Remanufacturing shaping system based on pulsed plasma arc welding. Rare Metal Mater Eng 2012; 41: 152–155.
25. Li C, White R, Fang XY, et al. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment. Mater Sci Eng A 2017; 705: 20–31.
26. Yu C, Pu-cun B, Fei L, et al. Effect of the Solution Temperature on the Precipitates and Grain Evolution of IN718 Fabricated by Laser Additive Manufacturing. Materials 2020; 13: 340.
27. Xing L, Shi JJ, Wang CH, et al. Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting. J Alloys Compd 2018; 764: 639–649.
28. 10.1016/j.jmst.2013.02.01010.1016/j.jmst.2013.02.010 ↗
29. 10.1016/j.jmst.2014.09.02010.1016/j.jmst.2014.09.020 ↗
30. 10.1016/j.actamat.2018.03.01710.1016/j.actamat.2018.03.017 ↗
31. 10.1016/j.msea.2022.14388310.1016/j.msea.2022.143883 ↗
32. 10.1016/j.jallcom.2017.09.19410.1016/j.jallcom.2017.09.194 ↗
33. Son K-T, Phan TQ, Levine LE, et al. The creep and fracture properties of additively manufactured inconel 625. Materialia 2021; 15: 101021.
34. Zhen X, Li-jie C, Qiang Z, et al. Creep property of Inconel 718 superalloy produced by selective laser melting compared to forging. Mater Sci Eng A 2020; 794: 139947.
35. 10.1016/j.scriptamat.2016.10.03510.1016/j.scriptamat.2016.10.035 ↗