journal article·2025-10

Acoustic, electrochemical, and microstructural characteristics of aluminum alloy 6061 modified with Zn and Sn

Maria Luisa Mendoza López, Luis Javier Anaya Loyola, Edgar Ulises Guerrero Cruz, Martha Elva Pérez Ramos, Joaquín Pérez Meneses, José de Jesús Pérez Bueno, José Antonio Cabello Méndez

Materials Science and Technology· Volume 41· Issue 14
Publisher page

Abstract

This work investigates the acoustic, electrochemical, and microstructural characteristics of aluminum alloy 6061 (AA6061) modified with zinc and tin to enhance sound attenuation. The effects of modifying the commercial aluminum alloy 6061 with the incorporation of Zn and Sn were analyzed for their impact on acoustic properties, electrochemical behavior, and microstructural changes. Zn and Sn incorporation alters the acoustic and electrochemical performance of AA6061. Tin was observed at the grain boundaries and zinc oxides were found in the aluminum grains. Young's modulus was determined using the impulse excitation technique. Zn and Sn block the formation of the aluminum oxide passive layer. Adding Zn and Sn into the AA6061 caused a slightly less negative cathodic potential with Zn than Sn.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Ultrasonics and Acoustic Wave Propagation · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departamento de Metalmecánica, Instituto Tecnológico de Querétaro, Tecnológico Nacional de México, Querétaro, Qro., México

Centro de Investigación y Desarrollo Tecnológico en Electroquímica, Querétaro, México

Instituto Mexicano del Transporte, Querétaro, México

Funding

Tecnológico Nacional de México

References (62)

Show source-provided references
1. Wu L, Zhai Z, Zhao X, et al. Modular design for acoustic metamaterials: low-frequency noise attenuation. Adv Funct Mater 2022; 32. Article: 2105712. DOI: https://doi.org/10.1002/adfm.202105712
2. 10.1088/1361-6463/ac663810.1088/1361-6463/ac6638 ↗
3. 10.1016/j.scitotenv.2018.03.37410.1016/j.scitotenv.2018.03.374 ↗
4. 10.1016/j.ymssp.2021.10871610.1016/j.ymssp.2021.108716 ↗
5. 10.1016/j.ijmecsci.2021.10687210.1016/j.ijmecsci.2021.106872 ↗
6. 10.3390/s2216599110.3390/s22165991 ↗
7. 10.1016/j.compstruct.2021.11355410.1016/j.compstruct.2021.113554 ↗
8. 10.1103/PhysRevB.100.13410510.1103/PhysRevB.100.134105 ↗
9. 10.1016/j.trd.2020.10253210.1016/j.trd.2020.102532 ↗
10. 10.1016/j.coco.2018.05.00110.1016/j.coco.2018.05.001 ↗
11. 10.1016/j.jobe.2023.10597910.1016/j.jobe.2023.105979 ↗
12. 10.1016/j.apacoust.2020.10775910.1016/j.apacoust.2020.107759 ↗
13. 10.1016/j.apacoust.2020.10772510.1016/j.apacoust.2020.107725 ↗
14. 10.1016/j.apacoust.2021.10796710.1016/j.apacoust.2021.107967 ↗
15. 10.1016/j.apacoust.2020.10763910.1016/j.apacoust.2020.107639 ↗
16. 10.1016/j.apacoust.2021.10815710.1016/j.apacoust.2021.108157 ↗
17. 10.1016/j.mtphys.2022.10081910.1016/j.mtphys.2022.100819 ↗
18. 10.1016/j.apacoust.2020.10773010.1016/j.apacoust.2020.107730 ↗
19. Boyes W. Instrumentation reference book. Amsterdam, Netherlands: Elsevier, 2010. Epub ahead of print 2010. DOI: https://doi.org/10.1016/C2009-0-25186-5
20. 10.1016/j.apmt.2021.10114110.1016/j.apmt.2021.101141 ↗
21. 10.1007/s12666-010-0117-710.1007/s12666-010-0117-7 ↗
22. 10.1016/j.apacoust.2022.10912410.1016/j.apacoust.2022.109124 ↗
23. 10.1016/j.apacoust.2022.10877910.1016/j.apacoust.2022.108779 ↗
24. 10.1016/j.apacoust.2020.10770610.1016/j.apacoust.2020.107706 ↗
25. 10.1016/j.apacoust.2014.06.01610.1016/j.apacoust.2014.06.016 ↗
26. 10.1016/j.apacoust.2021.10841410.1016/j.apacoust.2021.108414 ↗
27. 10.1016/j.apacoust.2020.10750510.1016/j.apacoust.2020.107505 ↗
28. 10.1016/j.apacoust.2012.10.00610.1016/j.apacoust.2012.10.006 ↗
29. 10.3390/ma902007910.3390/ma9020079 ↗
30. 10.1007/s11661-014-2313-210.1007/s11661-014-2313-2 ↗
31. 10.1080/15376494.2023.219160010.1080/15376494.2023.2191600 ↗
32. 10.3390/ma1501014910.3390/ma15010149 ↗
33. 10.3390/ma1523870710.3390/ma15238707 ↗
34. 10.1002/pssc.20130010110.1002/pssc.201300101 ↗
35. 10.1016/j.jnoncrysol.2020.12032710.1016/j.jnoncrysol.2020.120327 ↗
36. 10.1016/j.jmatprotec.2015.08.02410.1016/j.jmatprotec.2015.08.024 ↗
37. 10.1016/j.jnoncrysol.2019.11971610.1016/j.jnoncrysol.2019.119716 ↗
38. 10.1016/j.commatsci.2013.04.00710.1016/j.commatsci.2013.04.007 ↗
39. 10.3390/ceramics301001110.3390/ceramics3010011 ↗
40. 10.1007/s12613-018-1659-710.1007/s12613-018-1659-7 ↗
41. 10.1177/002199832092552810.1177/0021998320925528 ↗
42. ASTM. E1876-22 standard test method for Dynamic Young’s Modulus Shear Modulus and Poisson’s Ratio by impulse excitation of vibration.
43. ASTM International. C1259-21 standard test method for Dynamic Young’s Modulus Shear Modulus and Poisson’s Ratio for advanced ceramics by impulse excitation of vibration. Epub ahead of print 2021. DOI: https://doi.org/10.1520/C1259-21.10.1520/C1259-21 ↗
44. ISO. ISO 10534-2:2023 Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance. Epub ahead of print 2023. DOI: https://doi.org/10.3403/02552411U.10.3403/02552411U ↗
45. 10.3390/su14221505610.3390/su142215056 ↗
46. 10.1016/j.pnucene.2016.02.01610.1016/j.pnucene.2016.02.016 ↗
47. NACE International. NACE corrosion Engineer’s reference book. 4th ed. Houston, TX: Nace International, 2002.
48. Oberg E, Jones FD, Horton HL, et al. Machinery’s handbook. 31st ed. New York: Industrial Press Inc., 2020.
49. Okamoto H, Schlesinger ME, Mueller EM (eds) Alloy phase diagrams. OH, USA: ASM International, 2016. Epub ahead of print 27 April 2016. DOI: https://doi.org/10.31399/asm.hb.v03.9781627081634.
50. 10.1007/s10853-020-04711-610.1007/s10853-020-04711-6 ↗
51. 10.3390/coatings1101000410.3390/coatings11010004 ↗
52. Vargel C. The notion of potential. In: Corrosion of aluminium. 1st ed. Amsterdam, Netherlands: Elsevier, 2004, pp.63–89.
53. 10.1134/S207020511805026X10.1134/S207020511805026X ↗
54. 10.1016/j.matdes.2012.02.04310.1016/j.matdes.2012.02.043 ↗
55. Abbass MK, Hassan KS, Alwan AS. Study of corrosion resistance of aluminum alloy 6061/SiC composites in 3.5% NaCl solution. Int J Mater Mech Manuf 2015; 3: 31–35.
56. Hiromoto S. Corrosion of metallic biomaterials. In: Mitsuo N (ed) Woodhead publishing series in biomaterials metals for biomedical devices. Woodhead Publishing 2010 pp.99–121. DOI: 10.1533/9781845699246.2.9910.1533/9781845699246.2.99 ↗
57. Papavinasam S. Electrochemical polarization techniques for corrosion monitoring. In: Techniques for corrosion monitoring. Amsterdam, Netherlands: Elsevier, 2021, pp.45–77.
58. 10.1016/j.porgcoat.2022.10716610.1016/j.porgcoat.2022.107166 ↗
59. 10.1016/j.corsci.2022.11060410.1016/j.corsci.2022.110604 ↗
60. 10.3390/ma1518640110.3390/ma15186401 ↗
61. 10.1038/s41598-023-30193-y10.1038/s41598-023-30193-y ↗
62. 10.1016/j.corsci.2008.09.01910.1016/j.corsci.2008.09.019 ↗