journal article·2025-09

Tensile deformation behavior of a thermally exposed carbide free bainitic steel

Kishore Sakthivel, Sumeet Mishra, Sourav Das

Materials Science and Technology· Volume 41· Issue 13
Publisher page

Abstract

The article primarily concentrates on the extent of degeneration of microstructure of a carbide free bainitic steel while being exposed at high temperature vis-à-vis its effect on the mechanical properties. The as-received (AR) materials were exposed at different temperatures for a fixed duration and subsequently thoroughly characterized by employing several techniques suitable for microstructural and mechanical property evaluations. It was interesting to notice that both the amount of retained austenite as well as its C concentration were decreasing with higher temperature making it more unstable which could be reflected from the decreasing trend in the value of true strain that indicates the point of instability. It was observed that the dislocation annihilation coefficient ( k 2 ) was increased while the corresponding storage coefficient ( k 1 ) did not change much with the increase in exposure temperature compared to the AR sample.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Haridwar, Uttarakhand 247667, India

Funding

Science and Engineering Research Board

References (63)

Show source-provided references
1. 10.1179/174328408X38813010.1179/174328408X388130 ↗
2. 10.1179/174328408X38814910.1179/174328408X388149 ↗
3. 10.2355/isijinternational.43.123810.2355/isijinternational.43.1238 ↗
4. 10.1016/j.msea.2019.13859010.1016/j.msea.2019.138590 ↗
5. 10.1179/02670830110151035710.1179/026708301101510357 ↗
6. 10.1016/j.actamat.2007.09.01810.1016/j.actamat.2007.09.018 ↗
7. 10.1007/s11661-011-0699-710.1007/s11661-011-0699-7 ↗
8. 10.1179/02670830422501735510.1179/026708304225017355 ↗
9. 10.1201/978131509667410.1201/9781315096674 ↗
10. 10.3139/146.11078810.3139/146.110788 ↗
11. 10.1016/j.scriptamat.2019.04.01910.1016/j.scriptamat.2019.04.019 ↗
12. 10.1080/14786435.2022.213942110.1080/14786435.2022.2139421 ↗
13. 10.1007/s11661-022-06901-010.1007/s11661-022-06901-0 ↗
14. 10.1016/j.msea.2014.07.09710.1016/j.msea.2014.07.097 ↗
15. 10.1016/j.msea.2017.01.04410.1016/j.msea.2017.01.044 ↗
16. 10.1016/j.msea.2021.14235710.1016/j.msea.2021.142357 ↗
17. 10.1007/s11661-013-2173-110.1007/s11661-013-2173-1 ↗
18. 10.1080/02670836.2016.126866310.1080/02670836.2016.1268663 ↗
19. 10.1515/amm-2017-034210.1515/amm-2017-0342 ↗
20. 10.1080/02670836.2021.192313610.1080/02670836.2021.1923136 ↗
21. 10.1016/j.wear.2020.20335910.1016/j.wear.2020.203359 ↗
22. Das S. Unpublished work IIT Roorkee.
23. 10.1007/BF0335455310.1007/BF03354553 ↗
24. De AK, Speer JG, Matlock DK. Color tint-etching for multiphase steels. Advanced Materials and Processes 2003; 161: 27–30.
25. 10.1520/STP1607-EB10.1520/STP1607-EB ↗
26. Vander Voort GF. Tint etching. Metal Progress 1985; 127: 31–33. 36.
27. 10.1016/j.msea.2015.04.03010.1016/j.msea.2015.04.030 ↗
28. 10.1007/s11661-006-0213-910.1007/s11661-006-0213-9 ↗
29. 10.1016/j.msea.2015.03.06910.1016/j.msea.2015.03.069 ↗
30. 10.1007/s11661-022-06666-610.1007/s11661-022-06666-6 ↗
31. 10.2355/isijinternational.42.105910.2355/isijinternational.42.1059 ↗
32. 10.1080/1042691090320236910.1080/10426910903202369 ↗
33. 10.1016/j.actamat.2007.02.02910.1016/j.actamat.2007.02.029 ↗
34. 10.1016/j.ijplas.2016.10.00510.1016/j.ijplas.2016.10.005 ↗
35. 10.2355/isijinternational.46.31610.2355/isijinternational.46.316 ↗
36. 10.1179/02670830422501118010.1179/026708304225011180 ↗
37. 10.1016/S0921-5093(03)00121-710.1016/S0921-5093(03)00121-7 ↗
38. 10.1016/j.msea.2019.02.06210.1016/j.msea.2019.02.062 ↗
39. 10.1016/j.msea.2020.13892410.1016/j.msea.2020.138924 ↗
40. 10.1081/E-EISA-12005064010.1081/E-EISA-120050640 ↗
41. 10.1007/s11661-017-4086-x10.1007/s11661-017-4086-x ↗
42. Dyson DJ, Holmes B. Effect of alloying additions on the lattice parameter of austenite. J Iron Steel Inst 1970; 208: 469–474.
43. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
44. 10.1080/1478643560823807410.1080/14786435608238074 ↗
45. 10.1016/j.triboint.2020.10684610.1016/j.triboint.2020.106846 ↗
46. 10.1016/j.surfcoat.2020.12653310.1016/j.surfcoat.2020.126533 ↗
47. Christian JW. The theory of transformations in metals and alloys. 3rd ed. Oxford: Pergamon, 2002.
48. 10.1016/j.surfcoat.2020.12612910.1016/j.surfcoat.2020.126129 ↗
49. 10.1016/B978-0-08-100638-2.00007-910.1016/B978-0-08-100638-2.00007-9 ↗
50. 10.2320/matertrans.46.183910.2320/matertrans.46.1839 ↗
51. 10.2355/isijinternational.40.90210.2355/isijinternational.40.902 ↗
52. Hulme-Smith C. Improving the thermal stability of bulk nanocrystalline steel. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 2015: 567–568.
53. 10.1016/j.msea.2009.11.06310.1016/j.msea.2009.11.063 ↗
54. Bhadeshia HKDH, Edmonds DV. Tempered martensite embrittlement: role of retained austenite and cementite. Met Sci 1979; 13: 325–334.
55. 10.1016/j.msea.2016.04.00510.1016/j.msea.2016.04.005 ↗
56. 10.1016/j.msea.2022.14367710.1016/j.msea.2022.143677 ↗
57. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
58. Dieter GE, Bacon D. Mechanical metallurgy. 3rd ed. New York: McGraw-Hill Book Company, 1988: 275.
59. 10.1016/j.msea.2009.06.03610.1016/j.msea.2009.06.036 ↗
60. 10.1007/s10853-010-4580-710.1007/s10853-010-4580-7 ↗
61. 10.1533/9780857090256.2.30710.1533/9780857090256.2.307 ↗
62. Chen H, Chen Z, Liu J, et al. Constitutive modeling of flow stress and work hardening behavior while considering dynamic strain aging. Materialia (Oxf) 2021; 18: 1–18. Epub ahead of print 2021. DOI: https://doi.org/10.1016/j.mtla.2021.101137.
63. 10.1016/j.actamat.2017.08.06910.1016/j.actamat.2017.08.069 ↗