An optimized multiaxial fatigue life prediction model based on the subcritical plane method
Source abstract
Abstract
Since a more rigorous requirement is raised for the performance of aero-engine increases, the multiaxial fatigue problem of its components turns out to be increasingly severe. In this study, a multiaxial fatigue life prediction model is developed by using the subcritical plane method, where the effect of non-proportional additional hardening under non-proportional loading is considered by both the deflection angle of the subcritical plane and the combined parameters of strain on the subcritical plane. Moreover, the cyclic strain hardening index in the traditional model is substituted with an additional strengthening material coefficient that is characterized by the static strength of the material, which reduces the difficulty in calibrating the parameters of the multiaxial life model. The effectiveness of the proposed model is validated by comparing the predicted fatigue life with some fatigue test data, and the errors between the predicted and the testing data fall into a factor of two error bands. In general, the proposed multiaxial life prediction model simplifies the calibration of model parameters, and the prediction accuracy is still ensured, which promotes the model to facilitate engineering application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Province Key Laboratory of Aerospace Power System and College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, P. R. China
Wuxi Research Institute, Nanjing University of Aeronautics and Astronautics, Wuxi, P.R. China
Funding
Science Center for Gas Turbine Project · National Natural Science Foundation of China
References (37)
Show source-provided references
1. 10.1016/j.matdes.2014.03.01910.1016/j.matdes.2014.03.019 ↗
2. 10.1016/j.engfailanal.2014.09.01510.1016/j.engfailanal.2014.09.015 ↗
3. 10.1016/j.engfailanal.2022.10620210.1016/j.engfailanal.2022.106202 ↗
4. 10.1111/j.1460-2695.1979.tb01357.x10.1111/j.1460-2695.1979.tb01357.x ↗
5. 10.1111/j.1460-2695.1989.tb00515.x10.1111/j.1460-2695.1989.tb00515.x ↗
6. 10.1016/j.ijfatigue.2015.07.02710.1016/j.ijfatigue.2015.07.027 ↗
7. 10.1111/ffe.1265910.1111/ffe.12659 ↗
8. 10.1111/ffe.1307010.1111/ffe.13070 ↗
9. 10.1115/1.322598010.1115/1.3225980 ↗
10. 10.1016/j.engfracmech.2009.12.01210.1016/j.engfracmech.2009.12.012 ↗
11. 10.1016/j.ijplas.2013.09.00710.1016/j.ijplas.2013.09.007 ↗
12. 10.4271/R-23410.4271/R-234 ↗
13. 10.1243/PIME_PROC_1973_187_069_0210.1243/PIME_PROC_1973_187_069_02 ↗
14. 10.1111/j.1460-2695.1988.tb01169.x10.1111/j.1460-2695.1988.tb01169.x ↗
15. 10.1016/S0142-1123(97)00123-010.1016/S0142-1123(97)00123-0 ↗
16. 10.1007/s11665-017-3075-y10.1007/s11665-017-3075-y ↗
17. 10.1016/j.engfailanal.2018.07.00110.1016/j.engfailanal.2018.07.001 ↗
18. 10.1016/j.ijfatigue.2010.03.00610.1016/j.ijfatigue.2010.03.006 ↗
19. 10.1111/ffe.1279110.1111/ffe.12791 ↗
20. 10.1115/1.322570710.1115/1.3225707 ↗
21. 10.1111/ffe.1261910.1111/ffe.12619 ↗
22. 10.4028/www.scientific.net/AMR.306-307.48910.4028/www.scientific.net/AMR.306-307.489 ↗
23. 10.1016/j.ijfatigue.2008.11.01910.1016/j.ijfatigue.2008.11.019 ↗
24. 10.1016/j.ijfatigue.2020.10599310.1016/j.ijfatigue.2020.105993 ↗
25. 10.1016/0022-5096(85)90003-110.1016/0022-5096(85)90003-1 ↗
26. 10.1016/j.ijfatigue.2006.10.02810.1016/j.ijfatigue.2006.10.028 ↗
27. 10.1016/j.matdes.2009.06.04610.1016/j.matdes.2009.06.046 ↗
28. 10.1016/0043-1648(85)90129-210.1016/0043-1648(85)90129-2 ↗
29. 10.1016/0043-1648(90)90122-Q10.1016/0043-1648(90)90122-Q ↗
30. Itoh T, Nakata T, Sakane M, et al. Non-proportional low cycle fatigue of 6061 aluminum alloy under 14 strain paths. Mater Sci 1999; 25: 41–54.
31. 10.1016/j.ijfatigue.2005.08.00710.1016/j.ijfatigue.2005.08.007 ↗
32. 10.1016/j.ijfatigue.2011.01.01010.1016/j.ijfatigue.2011.01.010 ↗
33. 10.1016/j.ijfatigue.2006.06.01410.1016/j.ijfatigue.2006.06.014 ↗
34. Chen ZC. Fatigue life prediction of metallic materials under multiaxial non-proportional loading. Nanjing: Nanjing University of Aeronautics and Astronautics, 2011.
35. 10.1016/j.ijfatigue.2013.08.02810.1016/j.ijfatigue.2013.08.028 ↗
36. China Iron and Steel Association, GB/T40410-2021. Axial-torsional strain control method for multiaxial fatigue test of metal materials. Beijing: National Standards Administration of the State Administration for Market Regulation, 2021.
37. 10.1016/j.ijfatigue.2006.12.00510.1016/j.ijfatigue.2006.12.005 ↗