Micro-pore structures and compressive strengths of hydroxyapatite/wollastonite scaffolds prepared by freezing dry
Source abstract
Abstract
Hydroxyapatite (HA) has been wildly used in clinical practice for artificial implants. However, due to its inherent properties and preparation process, it is limited by low strength in practical applications. Therefore, highly porous hydroxyapatite scaffolds reinforced with 0 to 30 wt% doped wollastonite (WS) (HA/WS) were prepared by freeze-drying in combination with pressureless sintering method. The results demonstrated that WS could consistently improve the compressive properties of HA/WS scaffolds. The HA/WS scaffolds have optimal total porosity with good open pores and internal interconnections when the WS doping is 10%. In vitro osteoclast attachment experiments indicated that the HA/WS scaffolds had good biocompatibility. The findings of this study provide theoretical guidance for the application of HA in the field of artificial implants.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, China
School of Mechanical and Chemical Engineering, University of Western Australia, Perth, Australia
School of Materials Science and Technology, China University of Geosciences (Beijing), Beijing, China
Funding
China Scholarship Council · Australian Research Council · University of Western Australia
References (34)
Show source-provided references
1. 10.1016/j.msec.2016.10.01410.1016/j.msec.2016.10.014 ↗
2. 10.1021/la010790610.1021/la0107906 ↗
3. 10.3390/jfb1303014810.3390/jfb13030148 ↗
4. 10.1007/s42242-019-00056-510.1007/s42242-019-00056-5 ↗
5. 10.1016/j.ijbiomac.2023.12345310.1016/j.ijbiomac.2023.123453 ↗
6. 10.1016/j.jeurceramsoc.2016.01.01010.1016/j.jeurceramsoc.2016.01.010 ↗
7. 10.1007/s10853-023-08226-810.1007/s10853-023-08226-8 ↗
8. 10.1134/S003602362209012110.1134/S0036023622090121 ↗
9. 10.1016/j.ceramint.2020.09.21310.1016/j.ceramint.2020.09.213 ↗
10. 10.1016/j.biomaterials.2007.05.00310.1016/j.biomaterials.2007.05.003 ↗
11. 10.1016/j.ceramint.2018.03.01310.1016/j.ceramint.2018.03.013 ↗
12. 10.1016/j.ceramint.2016.05.16510.1016/j.ceramint.2016.05.165 ↗
13. 10.1016/j.mtcomm.2022.10321610.1016/j.mtcomm.2022.103216 ↗
14. 10.1016/j.ceramint.2018.05.24810.1016/j.ceramint.2018.05.248 ↗
15. 10.1504/IJNT.2018.09633610.1504/IJNT.2018.096336 ↗
16. 10.1021/acsabm.0c0123910.1021/acsabm.0c01239 ↗
17. 10.1080/09205063.2020.177782710.1080/09205063.2020.1777827 ↗
18. 10.1016/j.ceramint.2020.07.17110.1016/j.ceramint.2020.07.171 ↗
19. 10.1088/1748-605X/acb8f110.1088/1748-605X/acb8f1 ↗
20. 10.1016/j.matchemphys.2021.12530210.1016/j.matchemphys.2021.125302 ↗
21. 10.1016/j.msec.2019.11003610.1016/j.msec.2019.110036 ↗
22. Standards ABoA. Standard test method for compressive (Crushing) strength of fired whiteware materials. ASTM International.
23. 10.1515/polyeng-2018-010310.1515/polyeng-2018-0103 ↗
24. 10.3390/polym1422501710.3390/polym14225017 ↗
25. 10.1016/j.actbio.2018.11.03910.1016/j.actbio.2018.11.039 ↗
26. 10.1021/acsami.2c1561410.1021/acsami.2c15614 ↗
27. 10.1016/j.ceramint.2015.08.00410.1016/j.ceramint.2015.08.004 ↗
28. 10.1016/j.actbio.2020.07.02410.1016/j.actbio.2020.07.024 ↗
29. 10.1016/j.mser.2020.10058910.1016/j.mser.2020.100589 ↗
30. 10.1016/j.ceramint.2022.05.10310.1016/j.ceramint.2022.05.103 ↗
31. 10.1002/adem.20190028710.1002/adem.201900287 ↗
32. 10.1016/j.msec.2019.03.01410.1016/j.msec.2019.03.014 ↗
33. 10.3390/ma1217265010.3390/ma12172650 ↗
34. 10.1007/s10971-022-05842-910.1007/s10971-022-05842-9 ↗