journal article·2025-06

Optimization of process parameters in fabrication of Mg-9Al-Zn alloy matrix composite

Pourya Motavallian, Sayed Mahmood Rabiee, Hamed Jamshidi Aval

Materials Science and Technology· Volume 41· Issue 9
Publisher page

Abstract

In this research, using the response surface method (RSM), the effect of rotational speed, extrusion speed, and volume percentage of bioactive glass powder on the microstructure, mechanical properties, and corrosion resistance of AZ91-bioactive glass composite wire produced by friction stir-back extrusion has been studied. The results show that in hardness and strength responses, increasing the amount of bioactive glass from 1 to 5 vol.% increased the hardness and ultimate tensile strength by 18% and 13%, respectively. According to RSM prediction, the minimum corrosion rate (0.0427 ± 0.0059 mm/year), maximum ultimate tensile strength (327 ± 3 MPa), and maximum hardness (78.6 ± 2.1 HV) were achieved at rotational speed, extrusion speed, and bioactive glass particle content of 1200 rpm, 32.95 mm/min, and 5 vol.%, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Babol Noshirvani University of Technology

References (56)

Show source-provided references
1. 10.1016/S1003-6326(22)65984-310.1016/S1003-6326(22)65984-3 ↗
2. 10.1016/S1003-6326(23)66166-710.1016/S1003-6326(23)66166-7 ↗
3. 10.1016/S1003-6326(22)66115-610.1016/S1003-6326(22)66115-6 ↗
4. 10.1016/j.actbio.2010.12.00410.1016/j.actbio.2010.12.004 ↗
5. 10.1016/S1003-6326(22)66091-610.1016/S1003-6326(22)66091-6 ↗
6. 10.1016/S1003-6326(23)66190-410.1016/S1003-6326(23)66190-4 ↗
7. 10.1016/S1003-6326(22)66117-X10.1016/S1003-6326(22)66117-X ↗
8. 10.1016/j.cirpj.2023.01.00410.1016/j.cirpj.2023.01.004 ↗
9. 10.1016/j.mspro.2014.07.33710.1016/j.mspro.2014.07.337 ↗
10. 10.1016/S1003-6326(19)65067-310.1016/S1003-6326(19)65067-3 ↗
11. 10.1016/j.mtcomm.2021.10212910.1016/j.mtcomm.2021.102129 ↗
12. 10.1016/j.jmrt.2023.06.18910.1016/j.jmrt.2023.06.189 ↗
13. 10.1007/s12666-016-0841-810.1007/s12666-016-0841-8 ↗
14. 10.1177/0954405421101446510.1177/09544054211014465 ↗
15. Akbari M, Asadi P. Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method. Proc Inst Mech Eng, Part L: J Mater: Des Appl 2021; 235: 2709–2719.
16. 10.1007/s12666-015-0686-610.1007/s12666-015-0686-6 ↗
17. 10.1007/978-981-32-9072-3_6110.1007/978-981-32-9072-3_61 ↗
18. Gelaw M, Ramulu PJ, Hailu D, et al. Manufacturing and mechanical characterization of square bar made of aluminium scraps through friction stir back extrusion process. J Eng Des Technol 2018; 16: 596–615.
19. Jamali G, Jamaati R. Optimization of friction stir extrusion processing parameters for AA6063 aluminum alloy using Taguchi method. Modares Mech Eng 2018; 17: 176–182.
20. 10.1016/j.ceramint.2023.06.02310.1016/j.ceramint.2023.06.023 ↗
21. 10.1016/j.jmbbm.2023.10597710.1016/j.jmbbm.2023.105977 ↗
22. 10.1016/j.jma.2020.09.02610.1016/j.jma.2020.09.026 ↗
23. 10.1016/S1003-6326(23)66191-610.1016/S1003-6326(23)66191-6 ↗
24. 10.1016/j.surfcoat.2023.12945110.1016/j.surfcoat.2023.129451 ↗
25. 10.1080/00224065.2017.1191798810.1080/00224065.2017.11917988 ↗
26. 10.1016/j.biomaterials.2006.01.01710.1016/j.biomaterials.2006.01.017 ↗
27. 10.1016/j.matdes.2014.09.01810.1016/j.matdes.2014.09.018 ↗
28. 10.1007/s11837-019-03852-710.1007/s11837-019-03852-7 ↗
29. 10.1007/s11223-022-00403-510.1007/s11223-022-00403-5 ↗
30. Humphreys FJ, Hatherly M. Recrystallization and related annealing phenomena. Oxford, U.K.: Elsevier, 2012.
31. 10.1016/j.mtcomm.2023.10580810.1016/j.mtcomm.2023.105808 ↗
32. 10.1016/j.matchemphys.2023.12813510.1016/j.matchemphys.2023.128135 ↗
33. 10.1016/j.jmrt.2022.02.12710.1016/j.jmrt.2022.02.127 ↗
34. 10.3389/fbioe.2021.60517110.3389/fbioe.2021.605171 ↗
35. 10.1016/j.jma.2023.03.00110.1016/j.jma.2023.03.001 ↗
36. 10.1088/2053-1591/aaed7c10.1088/2053-1591/aaed7c ↗
37. 10.1007/s00170-010-2618-210.1007/s00170-010-2618-2 ↗
38. 10.3103/S106782121605015110.3103/S1067821216050151 ↗
39. 10.1007/s11771-012-0964-y10.1007/s11771-012-0964-y ↗
40. 10.1201/978020374077410.1201/9780203740774 ↗
41. 10.1080/00224065.1980.1198096810.1080/00224065.1980.11980968 ↗
42. 10.1007/s40571-021-00445-710.1007/s40571-021-00445-7 ↗
43. 10.1016/j.jmapro.2017.07.01010.1016/j.jmapro.2017.07.010 ↗
44. 10.1007/s40430-023-04114-z10.1007/s40430-023-04114-z ↗
45. 10.1007/s11665-016-1927-510.1007/s11665-016-1927-5 ↗
46. 10.1016/j.jallcom.2021.16340410.1016/j.jallcom.2021.163404 ↗
47. 10.1016/j.jmst.2021.08.01610.1016/j.jmst.2021.08.016 ↗
48. 10.1016/j.ijplas.2023.10380510.1016/j.ijplas.2023.103805 ↗
49. 10.1016/j.msea.2023.14592610.1016/j.msea.2023.145926 ↗
50. 10.1016/j.jmrt.2023.05.12710.1016/j.jmrt.2023.05.127 ↗
51. 10.3390/cryst1212174110.3390/cryst12121741 ↗
52. 10.1002/pen.76016051210.1002/pen.760160512 ↗
53. 10.1016/j.jallcom.2021.16143310.1016/j.jallcom.2021.161433 ↗
54. 10.1016/S1003-6326(19)64981-210.1016/S1003-6326(19)64981-2 ↗
55. Alkarim T, Al-Azawi K, Anaee R. Anticorrosive properties of spiramycin for aluminum in acidic medium. Int J Corros Scale Inhib 2021; 10: 1168–1188.
56. 10.1016/j.corsci.2007.01.00110.1016/j.corsci.2007.01.001 ↗