Effect of the process parameters of liquid–solid cast-rolling on the microstructure and properties of 1070A/7075 composite sheets
Source abstract
Abstract
The effects of casting temperature and cast-rolling speed on the microstructure and properties of the composite interface of 1070A/7075 aluminium alloy composite sheet were studied. The results showed that under the same process conditions, the diffusion distances of the Mg element and the Cu element were the greatest and smallest, while that of the Zn element was found between the diffusion distances of the two elements. Furthermore, the intermetallic compound Al 23 CuFe 4 generated at the interface greatly affected the bonding and tensile properties of the composite sheet. When the casting temperature was 690 °C, the cast-rolling speed was 12 m/min. The shear strength, tensile strength, yield strength and elongation were determined as 86.2, 173.9 and 108.6 MPa and 24.9%, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Material and Metallurgy, University of Science and Technology, Liaoning, Anshan, China
Liaoning Province Key Laboratory of Metallurgical Equipment and Process Control, Anshan, China
School of Materials Science and Engineering, Shenyang University of Technology, Shenyang, China
School of Mechanical and Electrical Engineering, Shandong Jianzhu University, Jinan, China
Funding
the Key Laboratory of Metallurgical Equipment Process Control · National Natural Science Foundation of China
References (28)
Show source-provided references
1. 10.1088/1757-899X/270/1/01202810.1088/1757-899X/270/1/012028 ↗
2. 10.1016/S0921-5093(99)00674-710.1016/S0921-5093(99)00674-7 ↗
3. 10.1016/j.jmatprotec.2016.01.00810.1016/j.jmatprotec.2016.01.008 ↗
4. 10.1016/j.msea.2008.12.01010.1016/j.msea.2008.12.010 ↗
5. 10.1016/j.actamat.2004.06.02310.1016/j.actamat.2004.06.023 ↗
6. Paul S, Shi J. Corrosion performance of damaged thermally sprayed aluminium in simulated deep sea environment. Therm Spray Technol 2017; 9: 48–53+58.
7. Shi ZC, Zhang XY, Chen H, et al. Properties of cold spray Al/Zn coatings on high-strength steel. J Mater Eng 2015; 43: 14–19.
8. Chen D, Li ZS, Wu HL, et al. Corrosion resistance of cold sprayed pure Al coating. Surface Technol 2016; 45: 174–179.
9. Qiu HB, Zhang M, Zhang JL. Solid–liquid phase metal casting complex method research. World Nonferrous Metals 2016; 10: 15–19.
10. Zhang P, Zhang YH, Chang QM. Current development and research of bimetal clad plate. Foundry Equipment Technol 2012; 1: 53–55.
11. Xu F, Xu JQ, Guo B, et al. Influencing factors for bonding performance of composite rolled X70/316L. Wisco Technol 2017; 55: 27–30.
12. 10.1007/s11595-019-2125-810.1007/s11595-019-2125-8 ↗
13. 10.1016/j.matdes.2017.01.04210.1016/j.matdes.2017.01.042 ↗
14. 10.1088/2053-1591/aadfbe10.1088/2053-1591/aadfbe ↗
15. 10.1016/j.jmatprotec.2017.03.00310.1016/j.jmatprotec.2017.03.003 ↗
16. 10.1016/j.proeng.2017.10.92410.1016/j.proeng.2017.10.924 ↗
17. 10.1016/j.jallcom.2022.16445810.1016/j.jallcom.2022.164458 ↗
18. 10.1007/s11665-022-07441-910.1007/s11665-022-07441-9 ↗
19. Jing YA, Dong HX, Sun BL, et al. Test methods for shear strength of thin bi-metal sheet. Hot Working Technol 2011; 40: 103–106.
20. Xu Z, Ma TY, Wang HB, et al. Effects of Zn content on microstructure and cracks during twin-roll casting of Al–Zn–Mg–Cu cast-rolled strips. Rare Metal Mater Eng 2020; 49: 4064–4071.
21. 10.1016/j.jallcom.2018.06.06810.1016/j.jallcom.2018.06.068 ↗
22. Chen TC, Li YD, Li M, et al. Effects of pouring temperature on composite interface of A356/2024 sheet by solid–liduid rolling. Special Casting Nonferrous Alloys 2018; 38: 295–299.
23. Dong PY. Study on interfacial microstructure and mechanical properties of A356/6082 bimetal fabricated by solid–liquid rolling. Lanzhou: Lanzhou University of Technology, 2019.
24. 10.1016/j.jmatprotec.2018.04.00610.1016/j.jmatprotec.2018.04.006 ↗
25. 10.1103/PhysRevB.5.469310.1103/PhysRevB.5.4693 ↗
26. 10.1016/0036-9748(76)90148-410.1016/0036-9748(76)90148-4 ↗
27. 10.1016/j.jallcom.2009.05.04610.1016/j.jallcom.2009.05.046 ↗
28. Tian SY, Sun YC, Zhen X, et al. Effect of casting temperature on the interface microstructure and properties of liquid–solid cast-rolling 1070A /7075 aluminum alloy composite sheet. Light Alloy Fabrication Technol 2023; 51: 13–21.